03-23-2010, 03:15 PM | #43 | |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Quote:
|
|
03-24-2010, 09:21 AM | #44 |
Drives: HyperBlue20162SS Join Date: Mar 2010
Location: St.Louis
Posts: 312
|
lmao! opps! yeah we did 2 pulls following the final run on that sheet. But they only printed the first 3 pulls. Hp did fall off a bit but Tq stayed consistant through heat soak. 509 RWHP 458 RWTQ is where it was on the final pull.
|
03-24-2010, 03:33 PM | #45 |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Still awsome numbers - I remember when my first 1982 Cross Fire Camaro made 160hp and i thought i had the fastest car in school - dyno'd at 102hp and 98ft/lbs to the tires
I still managed to shread a set of tire in 8,000 miles |
03-29-2010, 07:39 PM | #46 | |
|
I just got the dyno numbers for the Maggie install with the ADM Street Cold Air Intake that ADM Performance did today on my car.. Impressive numbers that came out of that shop.. Thanks Andy and Pat. You guys Rock..
I dropped it off Sunday evening and it was ready by 4:30 PM on Monday.. That is Service.. Check out my Dyno numbers and Dyno Video: Here is the Video: |
|
04-18-2010, 08:21 AM | #47 |
IN GOD WE THRUST
Drives: 2010 RY 2SS RS M6 TVS2300 2015 Z06 Join Date: Sep 2009
Location: PARKER,CO
Posts: 284
|
Just had my tune done Kooks Lt W HF cats,x pipe,Muffler,and resenator deleate,160 T-Stat, 580 RWH @9PSI Boost
__________________
SUCKING AIR & GAS & HAULING ASS http://www.picturetrail.com/sfx/album/view/22851126
|
04-26-2010, 09:41 AM | #48 |
Drives: 2010 LSX shootout champions Join Date: Apr 2010
Location: Houston,Texas
Posts: 334
|
looks good but what are you doing for fuel delivery??
|
04-26-2010, 12:13 PM | #49 | ||
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Quote:
|
||
04-26-2010, 12:45 PM | #50 |
Drives: 2010 LSX shootout champions Join Date: Apr 2010
Location: Houston,Texas
Posts: 334
|
This will always be a debate of which one is better between gear heads.
My two cents is this Why add more paricitic drag to the engine by driving a supercharger off of the crankshaft when you can use the exhaust waste to drive a turbocharger?The whole purpose to adding pressure to the intake is the addition of power and torque so why give up any to run a charger when you can charge the intake without the loss of any power? |
04-26-2010, 01:53 PM | #51 | |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Quote:
The exh manifolds on most turbo systems could be deemed as restrictive when compared to long tube headers - so 1 could argue that the exhaust system on a turbo car robs power vs. good long tube headers. But following your line of thinking, yes I agree Turbos are more efficient lb for lb in most applications. And I still ay the Magnuson has more guts below 2500 then any turbo system after that the turbo is king they both have there place |
|
04-26-2010, 02:12 PM | #52 | |
Drives: 2010 LSX shootout champions Join Date: Apr 2010
Location: Houston,Texas
Posts: 334
|
Quote:
I dont think anybody is going to start racing but making you shift at 2500 rpm anytime soon. Turbos are more efficient lb for lb PERIOD..... |
|
04-26-2010, 02:17 PM | #53 |
Petro-sexual
|
Would anyone agree that it depends on application?
If I'm towing, do I need that power/torque down low? If I'm racing, will that power/torque doen there get me off the line quicker? Will being a little softer down low help me come off the line easier and help me plant the power? |
04-26-2010, 02:21 PM | #54 | |
Account Suspended
Drives: 2SS Victory Red Join Date: Jul 2009
Location: Oxnard
Posts: 1,093
|
Quote:
If you are towing - peak torque is what you want If you are racing you want peak everything Turbo are best for real street car that want the best of all worlds. The maggies look the best when you open the hood - very OE looking and they make goos power Pure Racing - it is a toss up between a centrifugal and turbos |
|
04-26-2010, 02:48 PM | #55 | |
Petro-sexual
|
Quote:
Thanks for the info' |
|
04-26-2010, 03:07 PM | #56 | |
Drives: 2010 LSX shootout champions Join Date: Apr 2010
Location: Houston,Texas
Posts: 334
|
Quote:
If you are towing you just tighten up the aspect ratio of the turbine side to light the turbo quicker.The faster you want to spool the turbo the tighter you get the a/r.In a racing application you open up the a/r for higher rpm power but it wont light up as quick. If superchargers were better for towing i think all the diesel manufacturers would be using them but they stopped using them and went to turbos in the 1970s and have never looked back. There is absolutely no application where a supercharger is going to out perform a turbo. It comes down to what you like.I personally would rather just keep an eye on the egt guage than have to worry about belt tensioners, 8 or 10 rib set ups with all the pulleys, and worrying about belt slipage. |
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Tracking All Currently Known US VIN and Window Stickers - Order Tracking Thread | UCF w00t | Camaro Price | Ordering | Tracking | Dealers Discussions | 4242 | 02-17-2014 08:57 PM |
PWA "The Lounge" | DGthe3 | Off-topic Discussions | 143773 | 11-06-2010 11:00 AM |
Really? Why is the DealerInfo Thread Gone? | renderinfo | 5th Gen Camaro SS LS LT General Discussions | 2 | 02-11-2009 08:01 AM |
Changing Photoshop Thread Format | headpunter | Site Related Announcements / Suggestions / Feedback / Questions | 20 | 11-06-2008 05:40 PM |