Solo High Flow Cats - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroDreams76 · 10-30-2014, 03:54 PM

Quote:

Originally Posted by cornerspeed92

Why is your batter disconnected? im assuming this clears the CEL?

Right, disconnecting the battery clears the CEL and from what I read on here is the computer resets and readjust as well. So I gave it a shot.

cornerspeed92 · 10-30-2014, 03:55 PM

Quote:

Originally Posted by CamaroDreams76

It does clear the CEL and from what I read on here is the computer resets and readjust as well. So I gave it a shot.

Thanks for the insight

camguynj · 10-30-2014, 06:08 PM

Quote:

Originally Posted by CamaroDreams76

Right, disconnecting the battery clears the CEL and from what I read on here is the computer resets and readjust as well. So I gave it a shot.

Forgeddabout disconnecting the battery to clear codes and all the other battery disconnects reset stuff you have to deal with. If you have an Android phone get the Torque app ( free version is fine) and one of these $12 ODB2 readers http://www.tmart.com/OBD2-II-EOBD-EL...FUkF7AodayAAAg and you'll be able to see what CEL(s) you have and clear them from you phone in under a minute. Works like a charm

cornerspeed92 · 10-30-2014, 06:16 PM

Quote:

Originally Posted by camguynj

Forgeddabout disconnecting the battery to clear codes and all the other battery disconnects reset stuff you have to deal with. If you have an Android phone get the Torque app ( free version is fine) and one of these $12 ODB2 readers http://www.tmart.com/OBD2-II-EOBD-EL...FUkF7AodayAAAg and you'll be able to see what CEL(s) you have and clear them from you phone in under a minute. Works like a charm

Will an Iphone5 work?

camguynj · 10-30-2014, 06:25 PM

Quote:

Originally Posted by cornerspeed92

Will an Iphone5 work?

Look like it will but you have to buy the app, check this out https://itunes.apple.com/us/app/engi...591557194?mt=8

cornerspeed92 · 10-30-2014, 07:23 PM

Sweet, thanks.

camguynj · 10-30-2014, 08:48 PM

Quote:

Originally Posted by cornerspeed92

Sweet, thanks.

Welcome

CrystalRedTintcoat · 10-30-2014, 10:03 PM

Quote:

Originally Posted by cornerspeed92

Sweet, thanks.

Mark, go to the developer's web site. While the app is $5.99 you need to first buy a low energy Bluetooth ODB II adapter or an ELM327 Wifi ODB II adapter to use the app. I just bought the LE adapter for $40.

Read more here ...

http://www.outdoor-apps.com/enginelink.html

I suspect this plus the track / logging app for iPhone would be pretty darn cool.

-CRT

Sent from my iPad using Tapatalk

cornerspeed92 · 10-31-2014, 02:40 PM

Quote:

Originally Posted by CrystalRedTintcoat

Mark, go to the developer's web site. While the app is $5.99 you need to first buy a low energy Bluetooth ODB II adapter or an ELM327 Wifi ODB II adapter to use the app. I just bought the LE adapter for $40.

Read more here ...

http://www.outdoor-apps.com/enginelink.html

I suspect this plus the track / logging app for iPhone would be pretty darn cool.

-CRT

Sent from my iPad using Tapatalk

Looks pretty cool Brian. What all exactly do i need?

X25 · 10-31-2014, 02:43 PM

I bought a Bluetooth ELM327 adapter from eBay for $11, and use it with Torque app to get all the data. It works like a charm, and the cost was next to nothing.

SSMY1LE · 11-03-2014, 07:13 PM

So once you clear the CEL's with this device http://www.ebay.com/itm/141386682275 do they stay off or is it something you must do all the time ??
Thanks

camguynj · 11-03-2014, 11:18 PM

Quote:

Originally Posted by SSMY1LE

So once you clear the CEL's with this device http://www.ebay.com/itm/141386682275 do they stay off or is it something you must do all the time ??
Thanks

It only resets (ie. clears) the CEL code. The code will keep coming back everytime an emission drive cycle completes and sets the emission readiness monitors to Incomplete (this is was sets the CEL code) and you'll have reset/clear the code over and over again each time it's set.

kayer32 · 11-05-2014, 05:40 PM

Has anybody actually tried the JBA high flow cats yet? I'm thinking of this being my first minor performance mod this winter. I'm building backwards, cats then x pipe then eventually headers. Once I get to the headers I'll do CAI and tune.

cornerspeed92 · 11-05-2014, 05:54 PM

Quote:

Originally Posted by kayer32

Has anybody actually tried the JBA high flow cats yet? I'm thinking of this being my first minor performance mod this winter. I'm building backwards, cats then x pipe then eventually headers. Once I get to the headers I'll do CAI and tune.

Yes, that's what i have JBA

10-30-2014, 07:23 PM	#48
cornerspeed92 Drives: 2013 1SS 1LE Join Date: Jul 2012 Location: Colorado Posts: 4,188 View My Garage	Sweet, thanks. __________________

10-31-2014, 02:43 PM	#52
X25 Drives: '16 C7 Z51 Join Date: May 2012 Location: Redmond, WA Posts: 3,056	I bought a Bluetooth ELM327 adapter from eBay for $11, and use it with Torque app to get all the data. It works like a charm, and the cost was next to nothing. __________________ '16 Corvette C7 Z51 1LT (Build Thread) '14 AGM 1SS 1LE [COTW 11/17/14] (Build Thread) (SOLD) '13 Mazda MX-5 Club (Build Thread) '17 RAM 1500 Crew Cab 4x4 Night Edition '15 Nissan Rogue S AWD

11-03-2014, 07:13 PM	#53
SSMY1LE Drives: '14 1LE RS NPP Recaro Join Date: Dec 2013 Location: YYZ Posts: 1,676 View My Garage	So once you clear the CEL's with this device http://www.ebay.com/itm/141386682275 do they stay off or is it something you must do all the time ?? Thanks __________________ '14 1LE, Recaro, Cammed, Headers, Hi Flows, CAI, Tuned, 486 RWHP https://www.youtube.com/watch?v=H57UfKCO0EY&feature=youtu.be

11-05-2014, 05:40 PM	#55
kayer32 Drives: White 2014 1SS 1LE Join Date: Dec 2013 Location: Warner Robins Posts: 69	Has anybody actually tried the JBA high flow cats yet? I'm thinking of this being my first minor performance mod this winter. I'm building backwards, cats then x pipe then eventually headers. Once I get to the headers I'll do CAI and tune.