Harness Plate (tank plate) - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Mgizzle · 02-14-2015, 08:57 PM

Biggest issue with harness bars is your rear seat is useless. However, I cant believe that nobody has built one for the rear seat belts so that u just take harnesses off after tracking and ur rear seat is perfect again. Also your shoulder harnesses will be higher mounting which is better. Think using hook shoulder harnesses on top child seat mount...they are probably too weak but a bar back there or mounts that are strong would be awesome.

CrystalRedTintcoat · 02-14-2015, 10:21 PM

Quote:

Originally Posted by Mgizzle

Biggest issue with harness bars is your rear seat is useless. However, I cant believe that nobody has built one for the rear seat belts so that u just take harnesses off after tracking and ur rear seat is perfect again. Also your shoulder harnesses will be higher mounting which is better. Think using hook shoulder harnesses on top child seat mount...they are probably too weak but a bar back there or mounts that are strong would be awesome.

Check out the Brey-Krause r-1150. Doesn't require tank plates. DOT approved. Bigger issue is whether a harness without a roll bar is deemed safe.

White_SS/RS · 02-14-2015, 11:06 PM

Quote:

Originally Posted by CrystalRedTintcoat

I found this on steel forge.com:

Do you have any information on the expected load these can take?

-CRT

Sent from my iPad using Tapatalk

The situation they are describing would be extremely thick plating. 3/16 in the world of steel plate is very thin. Harness manufacturers recomend 3500lbs load capacity for the lap belt mounts. Analyzing that I've done shows my plate would deflect about .157" with 7500lbs on it.

CrystalRedTintcoat · 02-15-2015, 03:00 AM

Nice

White_SS/RS · 03-11-2015, 08:43 PM

SOLD

I have one set (1 left 1 right) of proto-type plates that I will offer at a reduced price ($115 off). They are the exact same as the final design but have a slightly thicker material thickness all the hardware is included.

Selling as a set only $300 PM if interested.

SOLD

White_SS/RS · 09-02-2015, 04:29 PM

I have 1 passenger side plate. If anyone is interested I'll make you a deal on it.

White_SS/RS · 09-02-2015, 04:31 PM

Gauging interest on producing more plates. Let me know if interested and if you'd be wanting driver, passenger,or both.

mySSt · 09-02-2015, 08:54 PM

Will be installing mine this weekend. This guy makes a quality product.

VTSummit · 09-02-2015, 10:33 PM

I'm on the fence about getting these. I need a harness bar as well, so considering the Brey-Krause setup which would negate the need for these plates.
I am hoping to find a harness bar that goes in and out easily, as I still take my kids around in the Camaro all the time.

mySSt · 09-24-2015, 09:37 PM

Quote:

Originally Posted by mySSt

Will be installing mine this weekend. This guy makes a quality product.

Used it with harnesses and bar setup. Easy to install, easy to snap the belts onto it, and no issues during driving the course. Highly recommend the product.

White_SS/RS · 10-28-2015, 10:40 AM

Ive had a few people ask about the plates. At the moment I'm out of stock, but if I have enough interest I can produce more. post a reply or send a PM.

BlkBlkZL1 · 11-15-2015, 06:23 PM

Id like to buy a set if you are still have them! I really want to save some money with yours. message me back when you get this please.

Superman09 · 12-28-2015, 08:47 PM

I'm interested in a set

Sent from my campfire using smoke signals

dabozz88 · 01-20-2016, 08:39 AM

Quote:

Originally Posted by White_SS/RS

Ive had a few people ask about the plates. At the moment I'm out of stock, but if I have enough interest I can produce more. post a reply or send a PM.

If you make more, I'll end up buying them from you.

I'm not usually on the forums though, so send a PM when you make more for a guaranteed sale.

02-14-2015, 08:57 PM	#43
Mgizzle Drives: 2013 Camaro 1LE 1SS Join Date: Aug 2012 Location: Detroit Posts: 1,252	Biggest issue with harness bars is your rear seat is useless. However, I cant believe that nobody has built one for the rear seat belts so that u just take harnesses off after tracking and ur rear seat is perfect again. Also your shoulder harnesses will be higher mounting which is better. Think using hook shoulder harnesses on top child seat mount...they are probably too weak but a bar back there or mounts that are strong would be awesome. __________________ I work for General Motors and am not an official spokes person for General Motors. My views and opinions are my own and not those of General Motors. Last edited by Mgizzle; 02-14-2015 at 09:09 PM.

02-15-2015, 03:00 AM	#46
CrystalRedTintcoat Drives: 2013 2SS 1LE NPP GBE Join Date: Sep 2012 Location: Bay Area, online, & in my 1LE Posts: 2,667 View My Garage	Nice __________________ 2013 1LE NPP GBE Mods Track Days

03-11-2015, 08:43 PM	#47
White_SS/RS Drives: 14 1LE Join Date: Mar 2013 Location: Spokane, WA Posts: 1,567	SOLD I have one set (1 left 1 right) of proto-type plates that I will offer at a reduced price ($115 off). They are the exact same as the final design but have a slightly thicker material thickness all the hardware is included. Selling as a set only $300 PM if interested. SOLD __________________ LMS Engineering Last edited by White_SS/RS; 03-11-2015 at 09:02 PM.

09-02-2015, 04:29 PM	#48
White_SS/RS Drives: 14 1LE Join Date: Mar 2013 Location: Spokane, WA Posts: 1,567	I have 1 passenger side plate. If anyone is interested I'll make you a deal on it. __________________ LMS Engineering

09-02-2015, 04:31 PM	#49
White_SS/RS Drives: 14 1LE Join Date: Mar 2013 Location: Spokane, WA Posts: 1,567	Gauging interest on producing more plates. Let me know if interested and if you'd be wanting driver, passenger,or both. __________________ LMS Engineering

09-02-2015, 08:54 PM	#50
mySSt Drives: '11 SS M6, '14 SS 1LE, '17 SS 1LE Join Date: Apr 2011 Location: East TX Posts: 533	Will be installing mine this weekend. This guy makes a quality product. __________________ Anyone can drive fast in a straight line, its what you can do thru the curves that matters! '11 CGM SS M6 ordered in 3/11, '14 BRM SS 1LE from stock in 10/13 & '17 HBM SS 1LE in 11/16 - all from BeckyD!!

09-02-2015, 10:33 PM	#51
VTSummit Consistently inconsistent Drives: 2015 2LT Summit White Join Date: May 2015 Location: United States Posts: 1,364	I'm on the fence about getting these. I need a harness bar as well, so considering the Brey-Krause setup which would negate the need for these plates. I am hoping to find a harness bar that goes in and out easily, as I still take my kids around in the Camaro all the time. __________________ Thanks to MRR, I have some SWEET wheels! Thank you! 2015 2LT Ported TB, Ported intake, JACFAB intake spacer, Borla exhaust, IPF 91 tune, Complete 1/LE suspension, Brembo brakes, Goodridge lines, Elite catch can, CAI with Thermo-wrap, 275/40-20 x 10's all around, Z/28 spoiler, GM splitter, Alpine/Polk stereo with AudiControl interface.

10-28-2015, 10:40 AM	#53
White_SS/RS Drives: 14 1LE Join Date: Mar 2013 Location: Spokane, WA Posts: 1,567	Ive had a few people ask about the plates. At the moment I'm out of stock, but if I have enough interest I can produce more. post a reply or send a PM. __________________ LMS Engineering

11-15-2015, 06:23 PM	#54
BlkBlkZL1 Drives: Black on Black 14'' ZL1 Join Date: Nov 2015 Location: San jose,Ca Posts: 3	Id like to buy a set if you are still have them! I really want to save some money with yours. message me back when you get this please.

12-28-2015, 08:47 PM	#55
Superman09 Account SNAFU Drives: 13 Tahoe 79 Scout II 15 1LE Join Date: Sep 2008 Location: College Station, TX Posts: 1,356 View My Garage	I'm interested in a set Sent from my campfire using smoke signals