Track Parts/Stock Parts for Sale

[clarkkent]

Originally Posted by plaincamarojoe

I may be interested in the OEM shifter, Send a pic to autoshiftgate@gmail.com
Thanks

Sounds good, I'll send some pictures when I get home

[clarkkent]

Bump, updated some prices

[clarkkent]

Bump

[DroptopZ]

I know this is a bit of an older post -- are the wheels still available? If so, is the price at all negotiable? If not, I understand -- but I am trying to get a permission slip from my better half.

Also, I've heard that going to a smaller diameter wheel can cause clearance issues with the factory Brembos; I'm assuming these are fine? I'd love to see a photo on the car if you have one

Thanks!

--Mike

[clarkkent]

Originally Posted by DroptopZ

I know this is a bit of an older post -- are the wheels still available? If so, is the price at all negotiable? If not, I understand -- but I am trying to get a permission slip from my better half.

Also, I've heard that going to a smaller diameter wheel can cause clearance issues with the factory Brembos; I'm assuming these are fine? I'd love to see a photo on the car if you have one

Thanks!

--Mike

Hi, wheels are still available, although they're pending from a local who is out of the country right now. Yes, price is negotiable, although shipping is going to be decently expensive. I still haven't found a good way to ship wheels.

These wheels are totally fine with factory brembos, I even had bigger brakes on mine (Stoptech BBK) and they fit fine.

Here are a few photos (some are x25's car)

[camguynj]

Originally Posted by clarkkent

Hi, wheels are still available, although they're pending from a local who is out of the country right now. Yes, price is negotiable, although shipping is going to be decently expensive. I still haven't found a good way to ship wheels.

These wheels are totally fine with factory brembos, I even had bigger brakes on mine (Stoptech BBK) and they fit fine.

Here are a few photos (some are x25's car)

Check out Greyhound bus shipping, dependable and economical, if locations to you and buyer are feasible.

[clarkkent]

Originally Posted by camguynj

Check out Greyhound bus shipping, dependable and economical, if locations to you and buyer are feasible.

I've checked that before, definitely cheaper than the main players.

[imaSSnake]

I almost lost $1,000 through a greyhound shipping deal. The seller finally gave me my money back but only after 3 months. It was only $50 extra to send the wheels and tires through FedEx. I will never buy anything shipped Greyhound again.
YMMV

[clarkkent]

Bump, lowered prices

[clarkkent]

Bump

[clarkkent]

Bump, still stuff for sale, reduced pricing

[ronchev]

for shits shoot me a price on the recaro

[@ReaperZL1]

Originally Posted by clarkkent

Hi All,
I have recently sold my 2013 Camaro SS 2SS RS, and I have some parts for sale. I’ll put pictures in the second post, let me know if you have any questions on the items. All prices are OBO, shoot me an offer. For now the prices don't include shipping. Parts are in Auburn, WA 98092.

Engine
Cold Air Inductions Polished Silver intake with race scoop and small washer bottle - SOLD
Kook’s Ceramic Coated 1-7/8” Headers with Kook’s High Flow Cats and O2 Extensions - SOLD
MSD Red Spark Plug Wires (used for about 200 miles) - SOLD
Elite Engineering Dirty Side Catch Can - SOLD
SCT X4 Tuner (purchased from Dynosteve, it has been married to only my vehicle, per Dynosteve it can be unlocked and used, no problem) - $180 shipped
DeWitt Radiator DEW-1139009A (2x thicker than stock, brand new in box) (2012-2015) - SOLD
AEM UEGO Wideband (comes with Bosch O2 sensor) – SOLD
Vitesse Throttle Controller TC-CAM19A - SOLD
Coil Pack Brackets (new) (to clean up underhood) (one is miscut, but barely) - SOLD

Suspension-Wheels
Full Z28 DSSV Multimatic Shocks (7 track days on them) - SOLD
Full Z28 DSSV Multimatic Shocks (Brand New) - SOLD
Pegasus Camber Plates (easily got -2.7 in front) - SOLD
4 Apex Anthracite Arc-8 Rotary Forged 19x10.5 ET22 wheels with 305/30R19 Z28 Pirelli Trofeo R Tires (wheels in perfect condition, with TPMS. No fitment issues whatsoever) - $1,500

Brakes
StopTech Red ST60 6 Piston 15” BBK with 380x32mm slotted-vented rotors w/stock Stoptech Pads (83.193.6800.71) and Goodridge Stainless brake lines (may need new rotors rings soon) - $1,500
Raybestos ST47 Brake pads for ST60 (3 track days on pads) - $200
Raybestos ST47 Brake Pads for SS Front Calipers ST47R1001.15 (1 track day on pads) - $200
Raybestos ST47 Brake Pads for SS Front Calipers ST47R1001.15 (bought used, decent life left) - $130
Raybestos ST45 Brake Pads for SS Rear Calipers ST45R592.15 (brand new) - $140
OEM Brembo Rear Brake Pads (3 sets for the price of 2) – $60
Brake Duct Mounts (to spindle, for brake ducting) - SOLD

Interior
Harness Bar + Tank Plates (all mounting parts included, no cutting or drilling required, has eyelets for harness) - SOLD
OEM SS 1LE Driver’s Recaro Seat (part 23478426). Not manufactured anymore, huge upgrade vs stock seat, in really good condition, 6 way power + heat - $1,500
OEM SS 1LE Alcantara Steering Wheel (for 2010-11, need to change to 2012+ style airbag) - SOLD
Sullivan Aluminum Pedal Covers (increases width on throttle for easier heel+toe) - SOLD
OEM Shifter Assembly - $50
Bracketeer Fire Extinguisher Mount (no drilling required, no extinguisher included) - SOLD
SLP Steering Column Gauge Pod - SOLD

Miscellaneous
Gen5DIY Always-on Halo Harness (for 2010-2013 RS, 2012-2015 ZL1) - $50
JDP Red Front Tow Hook (brand new) - SOLD
Black Replica ZL1 Wing with Brake Light - $80 - this thing is really long, like 65", so shipping is around $80. May not be worth it to ship
Driveshaft Tunnel Brace (forum member made them) - SOLD
Magnaflow X-pipe Muffler (new) (part 11386) - SOLD

how much do the wheels way? looking for a setup for roadcoursing and very interested

[clarkkent]

Originally Posted by ronchev

for shits shoot me a price on the recaro

Let me check into shipping, I'll try this weekend.

Originally Posted by @ReaperZL1

how much do the wheels way? looking for a setup for roadcoursing and very interested

x25 used the same exact ones, they weigh 23 lbs each. Here are a few links from his build thread. I can weigh them for you with the Trofeo R's, if you want. I can get that this weekend

https://www.camaro5.com/forums/showp...0&postcount=56
https://www.camaro5.com/forums/showp...4&postcount=90