SLP SS Bowtie insert and rear SS Logo - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Badger · 12-10-2009, 11:30 AM

Tony can you post some pics of the whole car for us?? Thanks..I'd like to check it out from a few angles if you could be so kind?

2010 SSRS · 12-10-2009, 11:48 AM

Looks good

JHart · 12-10-2009, 11:56 AM

so do you go from the back of the grill to pop them out??? i don't really see how it'd come out. my truck spoiled me(2 bolts holding in chevy emblem) and i don't get the clips.

SSTony · 12-10-2009, 06:25 PM

Quote:

Originally Posted by Badger

Tony can you post some pics of the whole car for us?? Thanks..I'd like to check it out from a few angles if you could be so kind?

I will when i clean the car this weekend. its in the garage till the wather gets better. gonna wash it and wax it saturday. then i will post some pics.

SSTony · 12-10-2009, 06:27 PM

Quote:

Originally Posted by JHart

so do you go from the back of the grill to pop them out??? i don't really see how it'd come out. my truck spoiled me(2 bolts holding in chevy emblem) and i don't get the clips.

u do have to push a tab on the back of the grill. Once it pops it slides out. then the part that is in the back pops off the back of the grill.

macinbro · 12-10-2009, 07:48 PM

mine just arrived today, i'll post pics when i get it all installed this weekend

JHart · 12-10-2009, 11:26 PM

i'm ordering mine soon. it's only like 40-45 shipped on the front emblem right???

scottcolem · 12-12-2009, 06:21 PM

I wonder if the SS badges from the 4th gen cars would work. I have a black car, and those badges came black outlined in red.

SSTony · 12-12-2009, 06:31 PM

Quote:

Originally Posted by scottcolem

I wonder if the SS badges from the 4th gen cars would work. I have a black car, and those badges came black outlined in red.

if you have the injection molding from slp u can stick any emblem on it

SSTony · 12-12-2009, 07:21 PM

here are some of the pics after i washed and waxed the beast. I still got 2 more SS logo's to put on the fenders

eynigush · 12-12-2009, 07:22 PM

Looks good. Looks clean...

55Designs · 12-12-2009, 07:45 PM

Was planning on doing my grill but its too cold to work on the car.

I tried bonding the SLP insert to the grill with my special 2 stage glue and it didnt cure properly. I had to rip it all out. I need to do this in my shop with the heat on working at home with limited materials is tough,

I hate the gaps in the insert so I am smoothing mine in.

SSTony · 12-13-2009, 11:49 AM

yea the gap is annoying if you like things perfect. i kept messing with it and its good enough for me. Only way you will get it perfect is if you get a whole new grill.

Badger · 12-14-2009, 01:26 PM

Looks great Tony....the black out on the rear matches perfect with your stripes.....not sure how the black out would look on an ABM with silver stripes not thinking so good..maybe they will come out with more colors for this.

12-10-2009, 11:30 AM	#43
Badger Drives: 2010 ABM SS #14 of 2,027 Join Date: Jan 2007 Location: New York Posts: 1,217	Tony can you post some pics of the whole car for us?? Thanks..I'd like to check it out from a few angles if you could be so kind? __________________ "One of the ordinary modes, by which tyrants accomplish their purposes without resistance, is, by disarming the people, and making it an offense to keep arms." -- Constitutional scholar and Supreme Court Justice Joseph Story, 1840

12-10-2009, 11:56 AM	#45
JHart I haz camaro again :) Drives: 2010 Chevrolet Camaro 1SS Join Date: Mar 2009 Location: Union, South Carolina Posts: 660	so do you go from the back of the grill to pop them out??? i don't really see how it'd come out. my truck spoiled me(2 bolts holding in chevy emblem) and i don't get the clips. __________________ 2010 Camaro 1SS(back in a camaro again, yessssss!) 2010 silverado z71 ccsb(sold, old dd) 2010 camaro1ss(sold, missed, will have another someday)

12-10-2009, 11:26 PM	#49
JHart I haz camaro again :) Drives: 2010 Chevrolet Camaro 1SS Join Date: Mar 2009 Location: Union, South Carolina Posts: 660	i'm ordering mine soon. it's only like 40-45 shipped on the front emblem right??? __________________ 2010 Camaro 1SS(back in a camaro again, yessssss!) 2010 silverado z71 ccsb(sold, old dd) 2010 camaro1ss(sold, missed, will have another someday)

12-12-2009, 07:21 PM	#52
SSTony Drives: SS Camaro Join Date: Jul 2009 Location: Piscataway NJ Posts: 1,782 View My Garage	here are some of the pics after i washed and waxed the beast. I still got 2 more SS logo's to put on the fenders __________________

12-12-2009, 07:22 PM	#53
eynigush SoCal C5 Family Member Drives: 2010 Camaro SSRS Rally Yellow Join Date: Oct 2009 Location: San Diego, CA Posts: 412 View My Garage	Looks good. Looks clean... __________________ Kooks 1 7/8 headers w/high flow cats Magnaflow Cat-back Competition Series Cold Air Intake by CAI Inc.

12-10-2009, 11:48 AM	#44
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,186 View My Garage	Looks good

12-10-2009, 07:48 PM	#48
macinbro Drives: 2SS RS CGM LS3 Join Date: Aug 2009 Location: Winter Springs, FL Posts: 72	mine just arrived today, i'll post pics when i get it all installed this weekend

12-12-2009, 06:21 PM	#50
scottcolem Drives: 2019 ZL1 Join Date: Nov 2009 Location: Lake in the Hills, IL Posts: 257	I wonder if the SS badges from the 4th gen cars would work. I have a black car, and those badges came black outlined in red.

12-12-2009, 07:45 PM	#54
55Designs Drives: 2010 Join Date: Sep 2009 Location: Westchester NY Posts: 990	Was planning on doing my grill but its too cold to work on the car. I tried bonding the SLP insert to the grill with my special 2 stage glue and it didnt cure properly. I had to rip it all out. I need to do this in my shop with the heat on working at home with limited materials is tough, I hate the gaps in the insert so I am smoothing mine in.

12-13-2009, 11:49 AM	#55
SSTony Drives: SS Camaro Join Date: Jul 2009 Location: Piscataway NJ Posts: 1,782 View My Garage	yea the gap is annoying if you like things perfect. i kept messing with it and its good enough for me. Only way you will get it perfect is if you get a whole new grill. __________________

12-14-2009, 01:26 PM	#56
Badger Drives: 2010 ABM SS #14 of 2,027 Join Date: Jan 2007 Location: New York Posts: 1,217	Looks great Tony....the black out on the rear matches perfect with your stripes.....not sure how the black out would look on an ABM with silver stripes not thinking so good..maybe they will come out with more colors for this. __________________ "One of the ordinary modes, by which tyrants accomplish their purposes without resistance, is, by disarming the people, and making it an offense to keep arms." -- Constitutional scholar and Supreme Court Justice Joseph Story, 1840

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ZL575 - SLP Camaro 4 Sale	drchevy1	Autos For Sale / Wanted	34	12-09-2009 03:40 PM
DSV CF Rear Spoiler Finished and Color Matched Shift Knobs & Insert (Pictures Inside)	dsvcustoms	Cosmetics and Lighting Modification Discussions	9	09-27-2009 05:30 PM
Tags 2002 Camaro SS FOR SALE (SOLD!)	TAG UR IT	Autos For Sale / Wanted	40	06-23-2009 02:11 AM