2010 Berger Chevrolet SS Camaro - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

WMCC Doug · 09-09-2009, 01:23 AM

Quote:

Originally Posted by Rookie13

A little research, some links included - couldn't find a confirmed price on some... but its close.

1. SuperCharger - $7500 (labor $$)??

2. Chambered Stainless Cat Back Exhaust System - $1200 +/- $200(brand)
Custom built for Berger

3. Forgeline 3 Piece Modular Wheels 20X9.5 Front, 20X10.5 Rear,
Custom Machined Center W/2010 SS Logo - Full Custom = ? $4K

5. Pirelli P Zero Tires 275/40X20 Front, 305/35X20 Rear - F=$818/pr R=$958/pr = Tire Total = $1776

6. Revised Suspension Including New Progressive Rate Springs - est. $350
Pedder's coil-overs

7. Urethane Radius Rod Bushings - $198

8. Urethane Rear Subframe Bushings - ??
Pedder's again

9. Hurst Billet/Plus 2 Short Throw Shifter - $350ish I think I saw on GMs Site
Not the same as the factory Hurst. Directly from Hurst, it's awesome.

10. Custom Painted Rally Stripes - $1100 approx

11. Custom Painted Blacked-Out Tail Panel - $150 est (no C/C)

12. Custom Painted Blacked-Out Inner Grille Area - $150 est (no C/C)

13. SS Fender Badges Featuring 2010 SS Logo - $75

14. Custom Styled Unique Front Grille - $350 (ish)

15. Retro Blue Front & Rear Bowtie Emblems - $75 est

16. Berger Numbered Dash Plaque - $35 est

17. “Prescribed Power by Berger” Engine Compartment Decal - $50 est

18. Chrome by Berger Rear Emblem - $75 est

19. Berger “Prescribed Power” Emblems - $150 est

20. Berger SS Floor Mats - $300 est

21. Fitted Berger SS Car Cover - $350 est

My estimated/modest total is - $17,809

You did a pretty good job with your estimates Rookie, just a little low on the shifter and quite low on the coil-over Pedder's shocks/springs.

http://www.peddersusa.com/products/21/73

This is an awesome package. I've ridden in it, and it's pretty darn fast. Handles great, too.

DkknightX: Matt Berger's name would not be on the other cars, only this one. It's his prototype. That badge on the dash would just give the car specs and car number.

DkknightX · 09-09-2009, 01:24 AM

Thanks man! Didn't know that. I thought it would be kind of strange to have all that badging.

29er · 09-09-2009, 01:30 AM

do they use the stock rear tires and put them up front??? or it's 4 new tires ???

gtwss · 09-09-2009, 02:17 AM

Quote:

Originally Posted by SSOOCH

I got all excited I thought is said "Burger" Edition SS not "Berger"

Not even close to being funny

:upset:

2011RS/SS · 09-09-2009, 02:53 AM

sounds like a good deal to me.. The car will definetely hold its value compared to other SS's out there in the world no matter whats done to them... The name holds POWER

WMCC Doug · 09-09-2009, 03:14 AM

Quote:

Originally Posted by Hurst equipped

do they use the stock rear tires and put them up front??? or it's 4 new tires ???

I believe they are moving the original back tires to the front and putting two new larger ones on the rear.

WMCC Doug · 09-09-2009, 03:19 AM

Quote:

Originally Posted by SSOOCH

I got all excited I thought is said "Burger" Edition SS not "Berger"

LOL, that's funny!

Oh, by the way, Berger does NOT rhyme with hamburger. I sounds like Ber-jer.

I'm curious, many have said they don't like the wheels. Why? They're high dollar Forgeline Wheels, very nice, with custom made (by Forgeline) center caps.

Shifty 6 · 09-09-2009, 09:22 AM

To me its not really worth it. I can see other people finding value in it, but for me I think I would pass. To me it looks like all the stuff anyone else will do....just not that original. It looks like they said well if ________ customizer is going to have badges, paint work, wheels and a supercharger we should do those things too. Just my opinion.

newagemuscle · 09-09-2009, 10:41 AM

Are those SS emblems on the fender the same as the ones on the front and rear from the factory? I would like to do something like that to mine, as many others have done here on the forum. I think I would like to have them be slightly larger than the factory emblems.

eddie SS · 09-09-2009, 10:44 AM

I'm sure there are people here that find this Camaro to be something special and to each is own. But to me it's just not that appealing. The wheels DEFINITELY have to go. They are ugly... But the rest seems to be on point w/ everyone else here as far as mods. Again nothing special. MHO.

WMCC Doug · 09-09-2009, 10:48 AM

Quote:

Originally Posted by newagemuscle

Are those SS emblems on the fender the same as the ones on the front and rear from the factory? I would like to do something like that to mine, as many others have done here on the forum. I think I would like to have them be slightly larger than the factory emblems.

The SS emblems on the fenders are not the same ones as on the rear and in the grille. They are custom made for Berger.

ravensjeff · 09-09-2009, 11:17 AM

Got to love a Chevy dealer stepping up to the plate. I'd love to have one of those in my SIM color- just not quite do-able on the cash front- I like not having payments.

So many dealers have been bashed for the ethics they have shown in selling the Camaro for high dollar- atleast this one is giving you something for it. I know I didn't allow my dealer to put their name on my car- but this one would certainly go on.

And the Rookie did a nice break down showing you that your not overpaying. Might not like some of the features, but they are NOT over priced.

CamaroTransAmFAM · 09-09-2009, 09:08 PM

the wheelz R ugly but for $19,000 i think, no disrespect to Berger,they should offer a whole lot of options.is it me or is it some companies R trying 2 capitalize on the popularity of the Camaro,they slap on a supercharger,a few badges & raise the price by $10,000 or more i should try it myself maybe i could get rich quick i'll pass on this 1 but i still love the Camaro

dave5514 · 09-09-2009, 09:44 PM

I wonder who is doing the custom chambered exhaust. I hope it is GMMG, I have their chambered exhaust on my 98 Z-28 and it sounds asweome!

09-09-2009, 10:41 AM	#51
newagemuscle Philippians 4:13 Drives: SLP Supercharged LS3 Join Date: Aug 2009 Location: The Motor City - Michigan Posts: 2,902 View My Garage	Are those SS emblems on the fender the same as the ones on the front and rear from the factory? I would like to do something like that to mine, as many others have done here on the forum. I think I would like to have them be slightly larger than the factory emblems. __________________

09-09-2009, 10:44 AM	#52
eddie SS ALWAYS A MARINE......!!! Drives: 2010 camaro IOM/2SS/RS/sunroof Join Date: Aug 2009 Location: Brooklyn, New York Posts: 268 View My Garage	I'm sure there are people here that find this Camaro to be something special and to each is own. But to me it's just not that appealing. The wheels DEFINITELY have to go. They are ugly... But the rest seems to be on point w/ everyone else here as far as mods. Again nothing special. MHO. __________________ She's finally home: 09/18/09 Mods so far: SOLO Performance MACH XL cat-back exhaust, NOWEEDS exhaust diverters, Tinted windows, gas cap decal, bow tie black outs, Cold Air Inc CAI, Eibach Pro kit lowering springs Mods I have but not installed yet: rear trunk black out, Diablosport Trinity Future Mods: ARH long tube w/ high flow cats or Dynatech's SuperMaXX long tube w/ high flow cats, Maggie S/C

09-09-2009, 11:17 AM	#54
ravensjeff 100% Chevy & Harley Man Drives: 2010 2SS: Blown LSX 376-B15 Join Date: Feb 2009 Location: Eldersburg,MD Posts: 2,211 View My Garage	Got to love a Chevy dealer stepping up to the plate. I'd love to have one of those in my SIM color- just not quite do-able on the cash front- I like not having payments. So many dealers have been bashed for the ethics they have shown in selling the Camaro for high dollar- atleast this one is giving you something for it. I know I didn't allow my dealer to put their name on my car- but this one would certainly go on. And the Rookie did a nice break down showing you that your not overpaying. Might not like some of the features, but they are NOT over priced. __________________ LSX 376-B15, TVS2300 SC, Harland Sharp Rockers w/ Trunion Bearings, ATI Balancer/keyed, AR LT Headers/Borla Catback Exhaust, DSS 1400 HP Axles, DSS aluminum driveshaft, 3.70, Hotchkis Springs/Sway bars, Forgeline SO3P Aluminum Wheels (20x9.5 F/20x11 R)w/ Hidden Titanium Hardware, Nitto NT05 Tires (27540ZR20 F/31535ZR20 R), Billet LPE brake/gas pedals, Escort 9500ci Radar Detector Laser Jammer, Roto Fab CAI with Ice Silver box, Carbon fiber tube/MAF Housing Assy, LPE Aluminum coil covers, SS9 Sleeper Fiber Glass Hood (ACS), Carbotech 1521 ceramic brake pads, Elite catch can.

09-09-2009, 09:08 PM	#55
CamaroTransAmFAM DIE HARD G.M.FAN 4 LIFE Drives: 99 TransAm WS6,00 TransAm WS6,05GTP Join Date: Nov 2008 Location: The WOODlands,Texas/New Orlean$ Posts: 195 View My Garage	the wheelz R ugly but for $19,000 i think, no disrespect to Berger,they should offer a whole lot of options.is it me or is it some companies R trying 2 capitalize on the popularity of the Camaro,they slap on a supercharger,a few badges & raise the price by $10,000 or more i should try it myself maybe i could get rich quick i'll pass on this 1 but i still love the Camaro __________________ #1 DIE HARD GM FAN SSuperior MotorSportz "the SSpirit of Championz,The Attitude of Winnerz,"TEAM FBODY WE LIVE AND BREATHE PERFORMANCE"General Motors 4 Life "CAMARO & TRANS AM RACING ORGANIZATION" THE STREETZ IS A JUNGLE,ONLY 2 BEAST REIGN AS KING:THE PONTIAC TRANS AM WS6/FIREHAWK & CAMARO SS/Z28

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 06:32 PM
GM unveils Jay Leno Camaro, Camaro Synergy, Camaro Chroma, Camaro Dusk at SEMA	irocnroll	5th Gen Camaro SS LS LT General Discussions	101	02-27-2012 01:25 PM
Chevrolet Camaro SS to pace 2010 Indianapolis 500	ljustin293	5th Gen Camaro SS LS LT General Discussions	123	09-07-2011 12:07 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 06:20 PM

09-09-2009, 01:24 AM	#44
DkknightX Account Suspended Drives: 2006 Chevrolet Cobalt SS/SC Stage 2 Join Date: Dec 2008 Location: Emerson, NJ Posts: 1,347 View My Garage	Thanks man! Didn't know that. I thought it would be kind of strange to have all that badging.

09-09-2009, 01:30 AM	#45
29er Drives: 14 1LE Garage King Join Date: Jan 2009 Location: MTL Posts: 1,519 View My Garage	do they use the stock rear tires and put them up front??? or it's 4 new tires ???

09-09-2009, 02:53 AM	#47
2011RS/SS Drives: 2016 corvette Z06 Join Date: May 2009 Location: Raleigh, NC Posts: 236	sounds like a good deal to me.. The car will definetely hold its value compared to other SS's out there in the world no matter whats done to them... The name holds POWER

09-09-2009, 09:22 AM	#50
Shifty 6 Drives: 2010 GTI Join Date: Jun 2008 Location: Morton, IL Posts: 679	To me its not really worth it. I can see other people finding value in it, but for me I think I would pass. To me it looks like all the stuff anyone else will do....just not that original. It looks like they said well if ________ customizer is going to have badges, paint work, wheels and a supercharger we should do those things too. Just my opinion.

09-09-2009, 09:44 PM	#56
dave5514 Drives: 1998 Z-28 (SOLD) Join Date: Aug 2009 Location: Cordova, TN Posts: 24	I wonder who is doing the custom chambered exhaust. I hope it is GMMG, I have their chambered exhaust on my 98 Z-28 and it sounds asweome!