First set of pics from the build by Jannetty - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Royal Tiger · 03-04-2022, 10:15 AM

Quote:

Originally Posted by 1JEWLDSSRS

Wow my friend!! That's very awesome!! You came out ahead of what you were looking for!! Well done, and she is gonna be a wild beast, that's foe sure.

Thanks!!!! I’m super excited about it. Ted is an amazing builder and truly cares about his projects.

Royal Tiger · 03-04-2022, 10:17 AM

Quote:

Originally Posted by Ashen 6.2

Thats awesome!! thats gonna be a fun ride.

Absolutely!!! It’ll probably pull close to 780 on a full tank of E. Way ahead of my 740-ish expectations.

1JEWLDSSRS · 03-04-2022, 02:44 PM

Man I couldn't even imagine that!! Mine is a real handful with what I have!! And quick as hell!!

gunchamp · 03-04-2022, 06:42 PM

Quote:

Originally Posted by Royal Tiger

Absolutely!!! It’ll probably pull close to 780 on a full tank of E. Way ahead of my 740-ish expectations.

Ill pm you my cell number. If you are heading this way this summer, hit me up. Im close to altoona. Would be cool to meet up. Would love to see your setup

Bigdumogre · 03-04-2022, 08:01 PM

I was going with jannetty at first but their quote had over $1000 of extras just to pad their pockets. They lost a customer for life and are known con artists.
Build looks solid though

hunter1660 · 03-05-2022, 09:54 AM

Royal Tiger · 03-05-2022, 10:59 AM

Quote:

Originally Posted by Bigdumogre

I was going with jannetty at first but their quote had over $1000 of extras just to pad their pockets. They lost a customer for life and are known con artists.
Build looks solid though

You’re entitled to your opinion, but you are on thin ice making a claim like that. It’s libelous. I have worked with other shops and I can honestly say Jennetty has far and away been the most open and transparent. Are there items on my build I could have passed on? Sure, but attention to detail and doing things the right way is hardly being “con artists”. I verified the parts were there and new when the car was dropped off. If you had an issue the Attorney General’s office is where you should be airing your concerns, not on an open forum with no evidence. He’s been in the same location since 1986. I’d gladly go back to Ted over the other shops I worked with in the past.

acutron42 · 03-05-2022, 08:13 PM

We should all be happy that we have choices in this country as others do not.

1JEWLDSSRS · 03-06-2022, 07:43 AM

Quote:

Originally Posted by acutron42

We should all be happy that we have choices in this country as others do not.

AMEN TO THAT BROTHER!!! But they are slowly going away with all the regulations they are trying to throw at us.. EV? No thanks...

silversleeper · 03-06-2022, 11:24 AM

Quote:

Originally Posted by Bigdumogre

I was going with jannetty at first but their quote had over $1000 of extras just to pad their pockets. They lost a customer for life and are known con artists.
Build looks solid though

I have posted some facts and after sale support problems before on the forum. I don't want to keep repeating it so I won't. Some people don't want to hear honest reviews so I'll not argue here. And no I don't have to hire a lawyer or go to the AG's office. Some of us can let it go and move on but that doesn't mean it's not true.

Royal Tiger · 03-06-2022, 12:30 PM

I’m confused as to your point. You seem to be agreeing with the post you quoted so I looked into what you’ve posted to see if I missed something. You’ve only started 4 threads ever, and none have to do with JRE. You have recommended JRE a few times (yes I read most of your 1000+ posts) and you are one of the ones who talked me out of RPM after the wrecked Corvette incident. I did searches on here, on the various Corvette forums and even tried on a GTO/G8 one. I’m sure no shop has 100% positive reviews, but I did attempt due diligence. Plus after going there I felt confident in my choice, as did my buddy who trailed my car up and has numerous high horsepower fords.

tartagliazl1 · 03-06-2022, 01:07 PM

it doesn't matter what anyone thinks, if your happy with the job they did, and the price point you paid then who gives a crap. Opinions are like assholes everyone has one.

silversleeper · 03-06-2022, 01:29 PM

Quote:

Originally Posted by Royal Tiger

I’m confused as to your point. You seem to be agreeing with the post you quoted so I looked into what you’ve posted to see if I missed something. You’ve only started 4 threads ever, and none have to do with JRE. You have recommended JRE a few times (yes I read most of your 1000+ posts) and you are one of the ones who talked me out of RPM after the wrecked Corvette incident. I did searches on here, on the various Corvette forums and even tried on a GTO/G8 one. I’m sure no shop has 100% positive reviews, but I did attempt due diligence. Plus after going there I felt confident in my choice, as did my buddy who trailed my car up and has numerous high horsepower fords.

I'm not wanting to go back and recount deceptive advertising and lack of support. For example I bought his dipstick. The stamping for full line is too faint to read (do I need to post a picture as proof?). I asked is it marked 1qt over OEM or what is the "full" level on too faint to read markings. He couldn't be bothered to answer that, but did spend the time to contact me (for no reason, no offer to make it right or anything) after I posted some negative comments in another thread. That took far more time than answering that or looking at a log one single time after buying a tune. So no, I stopped recommending him after that...insisting on parts not necessary etc.
I haven't heard of bad work so I don't feel compelled to jump in if someone chooses his shop. I will if someone has a bad experience like I did and basically is called a liar.
Edit: I was watching some youtube by LateModelEngines last week, and he had a car come in all hacked on. You had to find in the comments the link to what shop hacked it and it was RPM if I remember correctly. So I would NOT go there no matter what. Another commenter said it was likely done by an employee that has since been fired. Whatever, those are by far not the only negative reviews of them, RPM, as you say about other shops.

Royal Tiger · 03-06-2022, 02:54 PM

You can tone down the snarkyness. All I’m doing is trying to validate your comment. The “show proof” isn’t necessary, especially for something like a dipstick. No one called anyone a liar, all I did was warn someone over comments like “known con artists” in an open forum. It is absolutely libelous. I thanked you for the story on RPM then and am still grateful, so thank you again. Sorry you had a bad experience but I see two sides to every thread that starts up on here and plenty of satisfied customers. Thanks for taking the time to chime in and share on my thread.

03-04-2022, 02:44 PM	#45
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 14,533	Man I couldn't even imagine that!! Mine is a real handful with what I have!! And quick as hell!! __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

03-04-2022, 08:01 PM	#47
Bigdumogre Drives: 2012 Camaro SS Join Date: Dec 2019 Location: New York Posts: 1,452	I was going with jannetty at first but their quote had over $1000 of extras just to pad their pockets. They lost a customer for life and are known con artists. Build looks solid though __________________ 2012 Camaro 2SS/RS - CSP Custom Cam 232/240 .615/.615 113 +3, Texas speed CNC heads, FTI billet triple disc converter, K&N cai, Katech ported TB, GPI Ported/rod modded manifold, Texas speed 1 7/8 headers, HFC, Flowmaster 2 chambers with x pipe, Mishimoto CC, MSD wires, Roto fab washer relocation, tru cool 40k trans cooler, apex scoop, Pedders extreme coil overs and much more!!

03-05-2022, 09:54 AM	#48
hunter1660 Drives: 2011ss/rs camaro Join Date: Sep 2011 Location: florida Posts: 1,261	__________________ . OBX LTH,Rotofab,Magnuson Heartbeat.AEM wideband, HP Tuners

03-06-2022, 01:07 PM	#54
tartagliazl1 Drives: 2013 zl1 vert Join Date: Dec 2018 Location: Rochester, New york Posts: 1,231	it doesn't matter what anyone thinks, if your happy with the job they did, and the price point you paid then who gives a crap. Opinions are like assholes everyone has one. __________________ 22% lower/ 2.5 upper/ 2” headers/ cat delete/ x-pipe/ 2 gallon x tank/ 100-3 pump/ fic 1300/ dsx aux kit/ 103mm throttle body/ big gulp 5” intake/ meth kit/ prometh lid injection/FI interchiller/ 160* stat/ ngk-7/ msd wires/ elite catch can/ tsp cam/ Che trunnions/ ported supercharger/ 1/2” lid spacer/ cnc,milled ported heads/ brick mod/BMR toe and trailing arms/ 781hp 748 tq SAE @17.3lb on a loaded dyno.

03-05-2022, 08:13 PM	#50
acutron42 Drives: 2013 Camaro 2SS AGM Join Date: Apr 2020 Location: WNY Posts: 965	We should all be happy that we have choices in this country as others do not.

03-06-2022, 12:30 PM	#53
Royal Tiger Account Suspended Drives: 2013 2SS/RS Convertible Join Date: Apr 2016 Location: Lehigh Valley, PA Posts: 3,873	I’m confused as to your point. You seem to be agreeing with the post you quoted so I looked into what you’ve posted to see if I missed something. You’ve only started 4 threads ever, and none have to do with JRE. You have recommended JRE a few times (yes I read most of your 1000+ posts) and you are one of the ones who talked me out of RPM after the wrecked Corvette incident. I did searches on here, on the various Corvette forums and even tried on a GTO/G8 one. I’m sure no shop has 100% positive reviews, but I did attempt due diligence. Plus after going there I felt confident in my choice, as did my buddy who trailed my car up and has numerous high horsepower fords.

03-06-2022, 02:54 PM	#56
Royal Tiger Account Suspended Drives: 2013 2SS/RS Convertible Join Date: Apr 2016 Location: Lehigh Valley, PA Posts: 3,873	You can tone down the snarkyness. All I’m doing is trying to validate your comment. The “show proof” isn’t necessary, especially for something like a dipstick. No one called anyone a liar, all I did was warn someone over comments like “known con artists” in an open forum. It is absolutely libelous. I thanked you for the story on RPM then and am still grateful, so thank you again. Sorry you had a bad experience but I see two sides to every thread that starts up on here and plenty of satisfied customers. Thanks for taking the time to chime in and share on my thread.