Solo High Flow Cats - Page 4 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

zero · 07-21-2010, 09:06 PM

what size and length are the bolts?

GOINGSOLO2 · 07-21-2010, 10:47 PM

We made some improvements to the website now...let me know what areas are still a pain in the rear end. Thanks for the feedback guys!

GOINGSOLO2 · 07-22-2010, 01:27 PM

Let us know how the install goes at your shop...the bolts that we include are long enough, but for those that do it by hand themselves, a longer bolt (grade 8) would make it easier

ADIO SS · 07-25-2010, 10:29 PM

Regarding the A/F mixture, we have a phone call and an email in to our dyno shop requesting those numbers.
__________________
Solo Performance Product Videos for Camaro

Steve Mariano, 516-655-9002, goingsolo2@hotmail.com,
http://www.solo-performance.com

Sent pm - have dyno Air Fuel mixture results through the power band been posted, if so, pls direct me to them. Thanks...

Jul 26 - apparantly not available as they were 'hand written' notes taken from the dyno guy.

GOINGSOLO2 · 07-25-2010, 11:10 PM

The A/F, after a few drive cycles, was compensated for by the ECM and was close, if not exact to the stock numbers. There is no worry about running lean with these.

ssmike · 07-26-2010, 08:09 AM

Was that with stock manifolds and exhaust?

GOINGSOLO2 · 07-26-2010, 05:29 PM

Yes, that was with both the stock exhaust and our cat-back.

Rick2010 · 07-26-2010, 09:37 PM

Steve....
Installed mine with JBA Shortys and 3" cat back.........
WOW!!!!!!!!!!!!
CAN YOU SEE THE SMILE ON MY FACE!!!!!!

GOINGSOLO2 · 07-26-2010, 11:08 PM

That's fantastic...maybe you could post a sound clip if you have some time? I bet a few are curious to hear that combination.

Rick2010 · 07-27-2010, 10:17 AM

Quote:

Originally Posted by GOINGSOLO2

That's fantastic...maybe you could post a sound clip if you have some time? I bet a few are curious to hear that combination.

here ya go.......

Rick2010 · 07-27-2010, 10:22 AM

Thanks to Joey Harris at PACIFIC PERFORMANCE and Steve Mariano at SOLO.....
YOU GUYS ARE THE BOMB!!!!!!

ssmike · 07-27-2010, 12:09 PM

Sounds great! You're gonna love them!

Rick2010 · 07-27-2010, 01:05 PM

Quote:

Originally Posted by ssmike

Sounds great! You're gonna love them!

Thanks Mike!!!

GOINGSOLO2 · 07-27-2010, 01:18 PM

Sounds fantastic...thanks for the video and shout out. Let me know if you need anything

07-25-2010, 10:29 PM	#46
ADIO SS Drives: 2010 White SS/RS L99 Join Date: Jun 2010 Location: No. NJ Posts: 310	Regarding the A/F mixture, we have a phone call and an email in to our dyno shop requesting those numbers. __________________ Solo Performance Product Videos for Camaro Steve Mariano, 516-655-9002, goingsolo2@hotmail.com, http://www.solo-performance.com Sent pm - have dyno Air Fuel mixture results through the power band been posted, if so, pls direct me to them. Thanks... Jul 26 - apparantly not available as they were 'hand written' notes taken from the dyno guy. Last edited by ADIO SS; 07-26-2010 at 07:23 AM. Reason: added response from prev post

07-26-2010, 09:37 PM	#50
Rick2010 Chevrolet's & NY Yankees! Drives: ALL CHEVROLET'S Join Date: Aug 2009 Location: Up State, NY Posts: 82	Steve.... Installed mine with JBA Shortys and 3" cat back......... WOW!!!!!!!!!!!! CAN YOU SEE THE SMILE ON MY FACE!!!!!! __________________

07-27-2010, 10:22 AM	#53
Rick2010 Chevrolet's & NY Yankees! Drives: ALL CHEVROLET'S Join Date: Aug 2009 Location: Up State, NY Posts: 82	Thanks to Joey Harris at PACIFIC PERFORMANCE and Steve Mariano at SOLO..... YOU GUYS ARE THE BOMB!!!!!! __________________ Last edited by Rick2010; 07-27-2010 at 10:26 AM. Reason: spelling

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
JBA High Flow Catted and Off Road Mid Pipes - LS3/L99 - fits stock manifolds/shortys	MarylandSpeed	V8 Bolt-Ons & Tunes	8	08-26-2010 03:42 AM
NEW American Racing Headers w/ high flow cats	jlito	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	9	06-22-2010 12:24 PM
SOLO PERFORMANCE makes two EXCELLENT Exhausts for the 6.2L V8	Xmicro_SS	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	106	04-19-2010 10:11 PM
Modern Muscle Exhaust and Intake Special	modern-muscle	V8 Bolt-Ons & Tunes	1	01-20-2010 07:46 PM

07-21-2010, 09:06 PM	#43
zero Drives: Black 2SS/RS LS3 Join Date: Feb 2010 Location: Canada Posts: 265	what size and length are the bolts?

07-21-2010, 10:47 PM	#44
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	We made some improvements to the website now...let me know what areas are still a pain in the rear end. Thanks for the feedback guys!

07-22-2010, 01:27 PM	#45
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	Let us know how the install goes at your shop...the bolts that we include are long enough, but for those that do it by hand themselves, a longer bolt (grade 8) would make it easier

07-25-2010, 11:10 PM	#47
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	The A/F, after a few drive cycles, was compensated for by the ECM and was close, if not exact to the stock numbers. There is no worry about running lean with these.

07-26-2010, 08:09 AM	#48
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841	Was that with stock manifolds and exhaust?

07-26-2010, 05:29 PM	#49
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	Yes, that was with both the stock exhaust and our cat-back.

07-26-2010, 11:08 PM	#51
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	That's fantastic...maybe you could post a sound clip if you have some time? I bet a few are curious to hear that combination.

07-27-2010, 12:09 PM	#54
ssmike BL1ZZRD Drives: '16 Camaro 2SS, '20 Equinox Redline Join Date: Jul 2009 Location: Buffalo, NY Posts: 7,841	Sounds great! You're gonna love them!

07-27-2010, 01:18 PM	#56
GOINGSOLO2 Drives: All Models Join Date: Aug 2009 Location: NY Posts: 1,475	Sounds fantastic...thanks for the video and shout out. Let me know if you need anything