Treasure Coast Camaro 5 ***TCC5***

[GreenMonster]

Originally Posted by FLRS

In the process of installing the colorshift halo's

was it very difficult to remove the bumper?

1-5 (5 the hardest )

[FLRS]

Originally Posted by mikepage0007

yeah, i found that it was much easier to heat longer than in structions...ist light took me over an hr...2nd light i cooked 28 minutes and pulled apart ion 5 minutes, 1 reheat..any questions ,shout ..home depot has black caulk, and i have about 10 pairs of clamps and vice grips, you will need them

Mike, I should have asked you about this before I started. I could have saved some time and aggravation. I should have known that you would know about this. You're like an information database.

[FLRS]

Originally Posted by GreenMonster

was it very difficult to remove the bumper?

1-5 (5 the hardest )

It was a 1. There's like 6 retainers and 10-12 bolts.

[Drago77]

Originally Posted by FLRS

It was a 1. There's like 6 retainers and 10-12 bolts.

Piece of cake, took off my bumper last month. Looks more intimidating than it is

[mikepage0007]

Originally Posted by FLRS

Mike, I should have asked you about this before I started. I could have saved some time and aggravation. I should have known that you would know about this. You're like an information database.

no prob, if you have not done boith headlights yet , cook the 2nd one longer, approx 28 minutes same temp as cd,,, real trick was learning how far to work that screwdriver thru and constantly reaheating.....make sure you work palstic decent when doing...also when replacing back to gether MAKE SURE you have not touched inside lens at and left any prints ...you will not want anything inside after resealing...and it took me 6 clamps per headlight, and i left on 24hrs for 100% cure, did not want any chance of moisture or seperation...

[Drago77]

Mike - your name is disturbingly absent from the PBIR thread

[FLRS]

Originally Posted by mikepage0007

no prob, if you have not done boith headlights yet , cook the 2nd one longer, approx 28 minutes same temp as cd,,, real trick was learning how far to work that screwdriver thru and constantly reaheating.....make sure you work palstic decent when doing...also when replacing back to gether MAKE SURE you have not touched inside lens at and left any prints ...you will not want anything inside after resealing...and it took me 6 clamps per headlight, and i left on 24hrs for 100% cure, did not want any chance of moisture or seperation...

Both are apart. I Plan on putting them back together tomorrow and installing them on Thursday. Thanks for the tip on the fingerprints.

[mikepage0007]

i,ll be there..

[Jaime068]

Finally came in today! The reason why I am going "shorties" is because I'm leaning more towards sound than performance with my Camaro. By what ppl say, shorties deepen and smooth out the sound of an exhaust when combined(I want a nice sounding v6 not a loud obnoxious one lol). Also, I have the extended 5yr/72,000mile warranty on mine and wouldnt wanna have that voided due to the tune needed for longtube headers.

[Drago77]

Looks good! Im checkin your install w my quotes!

[Black11SS]

Maybe picked up a new member today.....grabbed him in my parking lot this morning and told him to check website....2ss white with orange rally stripes ...sounded pretty interested,might even show up Friday for TF3....btw kev I wanna get some cards from you...maybe Friday

[BumbleBeeSS2009]

Guys - If you haven't already pop over to the PBIR Thread - we're getting smoked over there, we've only had 7 of us sign up to race so far vs SFC5's 11!!

[Drago77]

Originally Posted by BumbleBeeSS2009

Guys - If you haven't already pop over to the PBIR Thread - we're getting smoked over there, we've only had 7 of us sign up to race so far vs SFC5's 11!!

Paige, Billy, Terry, Dominick....c'mon everyone!!!!!

[Drago77]

Dear Treasure Coast Camaro 5 family;

PLEASE join us to celebrate Krystel's 28th Birthday, this Saturday!

Festivities will begin around 6:00 at Guanabanana in Jupiter for dinner then move to Panama Hatti's Rum Bar in North Palm Beach around 9:00!

It's a long weekend, so lets celebrate!

Guanabanana;
6:00pm
960 N Hwy A1A, Jupiter Fl

Rum Bar
9:00pm
11511 Elison Wilson Rd, N. Palm Beach