Official Central Jersey Camaro5 Thread - Page 43 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

jennnchuck · 10-02-2012, 02:46 PM

jerry yes i work at chevy dealer and there are some really good guys there, but management doesnt like them doing stuff on the side. so rather then getting them in trouble i would rather bring it somewhere and get it done. i think by now the bosses know my car well enough that if they seen it up on the lift they would know it was mine. lol

IDEALG · 10-02-2012, 02:50 PM

Quote:

Originally Posted by jennnchuck

jerry yes i work at chevy dealer and there are some really good guys there, but management doesnt like them doing stuff on the side. so rather then getting them in trouble i would rather bring it somewhere and get it done. i think by now the bosses know my car well enough that if they seen it up on the lift they would know it was mine. lol

lol , ok gotcha. well I can help you out when the time comes. it's up to you.

jennnchuck · 10-02-2012, 02:54 PM

ok thanks. any suggestions on what exhaust and headers to get? also what cai?

IDEALG · 10-02-2012, 03:01 PM

Quote:

Originally Posted by jennnchuck

ok thanks. any suggestions on what exhaust and headers to get? also what cai?

i'd talk to Chris and Mike for V6 suggestions, i'm more a SS guy and everyone with a V6 that i installed axle backs on bought MRT and hated them and had me put their old mufflers back on. they complain about too much drone.

I like cold air inductions but that my personal prefference.
http://www.coldairinductions.com/sto...old-air-intake

and i believe we all like ARH headers

Monchy36 · 10-02-2012, 03:16 PM

Quote:

Originally Posted by IDEALG

i'd talk to Chris and Mike for V6 suggestions, i'm more a SS guy and everyone with a V6 that i installed axle backs on bought MRT and hated them and had me put their old mufflers back on. they complain about too much drone.

I like cold air inductions but that my personal prefference.
http://www.coldairinductions.com/sto...old-air-intake

and i believe we all like ARH headers

What's your thoughts about Vararam? Not good? I'm thinking on change mine but i can't decide???

One Sick Camaro · 10-02-2012, 04:02 PM

air intake I got K&N but heard injen is the best for us idc lol. and mrt 1.0 with no resonators and rear cats sounds amazing. I haven't liked any other exhaust out there.

IDEALG · 10-02-2012, 04:05 PM

Quote:

Originally Posted by Monchy36

What's your thoughts about Vararam? Not good? I'm thinking on change mine but i can't decide???

I'm not a fan of vararam. If your going to make a product to sell then you damn well better make it right and with proper brackets. Vararam must think otherwise because everyone seems to have to make their own radiator brackets.

Monchy36 · 10-02-2012, 04:10 PM

Quote:

Originally Posted by IDEALG

I'm not a fan of vararam. If your going to make a product to sell then you damn well better make it right and with proper brackets. Vararam must think otherwise because everyone seems to have to make their own radiator brackets.

Then is between you and Chris... Cold air or Injen...

IDEALG · 10-02-2012, 04:13 PM

Quote:

Originally Posted by Monchy36

Then is between you and Chris... Cold air or Injen...

They are both good. personal preference

One Sick Camaro · 10-02-2012, 04:15 PM

tom the covers will only come off at night making them stay on.

2010camarolt · 10-02-2012, 06:01 PM

i have the rotofab intake thats another options. and headers it depends if you want to go shorty or longtubes. and the drone is not bad on the mrt v2 i bearly hear it

Glasstop2010RS · 10-02-2012, 09:05 PM

1. Ported TB
2. Injen CAI
3. ARH LT w/HFC *
4. RX Catch can
5. Trifecta Tune *
6. Axle Back for sound or weight reduction MRT V2.
7. Ported IM & Black isolater 25mm. if you want it.
This combo will yeild about 340 to 350 HP to the flywheel or about 270 to 280 RWHP.
I recommend IDealG ( Jerry ) do all the work he is Class "A" mechanic. He is the only one I trust my Camaro to.

Bob.

Now back to the Girls, I'll take # 5 because she has the right food combo....lol...Wings & Beer !!!

One Sick Camaro · 10-02-2012, 10:21 PM

Nope Blondie mine already lol

Blue17CamaroZL1 · 10-02-2012, 10:30 PM

Quote:

Originally Posted by IDEALG

ok what really happened? you really got piss drunk and tried to use your subs as drums right? lol

I wish

Something didn't sound right with the base, like it was rather weak. I pull the back seat down and one of the subs had come loose from the box.

Also, good bye Saturn, hello Trailblazer:

10-02-2012, 02:46 PM	#589
jennnchuck Drives: 2010 yellow 2lt/rs Join Date: Apr 2010 Location: hazlet, new jersey Posts: 896 View My Garage	jerry yes i work at chevy dealer and there are some really good guys there, but management doesnt like them doing stuff on the side. so rather then getting them in trouble i would rather bring it somewhere and get it done. i think by now the bosses know my car well enough that if they seen it up on the lift they would know it was mine. lol __________________

10-02-2012, 02:54 PM	#591
jennnchuck Drives: 2010 yellow 2lt/rs Join Date: Apr 2010 Location: hazlet, new jersey Posts: 896 View My Garage	ok thanks. any suggestions on what exhaust and headers to get? also what cai? __________________

10-02-2012, 04:02 PM	#594
One Sick Camaro That Cam though... Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010 Location: NJ Posts: 2,817	air intake I got K&N but heard injen is the best for us idc lol. and mrt 1.0 with no resonators and rear cats sounds amazing. I haven't liked any other exhaust out there. __________________

10-02-2012, 04:15 PM	#598
One Sick Camaro That Cam though... Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010 Location: NJ Posts: 2,817	tom the covers will only come off at night making them stay on. __________________

10-02-2012, 06:01 PM	#599
2010camarolt Drives: Victory Red 1LT Join Date: Aug 2010 Location: Central Jersey Posts: 2,173 View My Garage	i have the rotofab intake thats another options. and headers it depends if you want to go shorty or longtubes. and the drone is not bad on the mrt v2 i bearly hear it __________________

10-02-2012, 09:05 PM	#600
Glasstop2010RS Drives: Corvette C6 500 HP Join Date: Dec 2011 Location: Central New Jersey Posts: 1,106	V6 Power LLT adds 1. Ported TB 2. Injen CAI 3. ARH LT w/HFC * 4. RX Catch can 5. Trifecta Tune * 6. Axle Back for sound or weight reduction MRT V2. 7. Ported IM & Black isolater 25mm. if you want it. This combo will yeild about 340 to 350 HP to the flywheel or about 270 to 280 RWHP. I recommend IDealG ( Jerry ) do all the work he is Class "A" mechanic. He is the only one I trust my Camaro to. Bob. Now back to the Girls, I'll take # 5 because she has the right food combo....lol...Wings & Beer !!! __________________ 2011 Camaro RS Convertible M6 Last edited by Glasstop2010RS; 10-02-2012 at 09:20 PM. Reason: Add text

10-02-2012, 10:21 PM	#601
One Sick Camaro That Cam though... Drives: 11 Camaro 2SS 02 T/A WS6 15 SSV Join Date: Mar 2010 Location: NJ Posts: 2,817	Nope Blondie mine already lol __________________