2010 Camaro SEMA Car by Montage Motoring and Defenderworx - Page 46 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Defenderworx · 07-27-2009, 05:21 PM

Quote:

Originally Posted by Moorepheus

that is absolutely SHARP...how much where the GTO blackouts for the tail lights and the head lights???

Quote:

Originally Posted by Jericho

That black car with the black out lights is the shizzel

. I have to know how much for the blinker lights front and back as well as the reverse lights and the break light in the rear window.

An tell the DTS boys to do a deep blood red tail light that's sharper and at the same time brighter than OEM and I'll take a set of those too.

To be honest with you GTS made those for us for free so I'm not to positive about the prices, however I'm sure they will be offering them for sale soon so your best bet is to contact them about it.

Defenderworx · 07-27-2009, 05:24 PM

Hey guys here are some pictures from the Camaro5 meet and greet on Saturday. The first two pictures are from the Cars & Coffee car show on Saturday. After that the next picture is of Ron from Zoomers and rest of the pictures after that are all of Guillermo who runs Camaro5.com and who we all need to thank for this wonderful site! Thank you Guillermo for all the time and effort than you put into Camaro5 we all appreciate a lot!

Defenderworx · 07-27-2009, 05:40 PM

Here are the rest of the pictures from the Camaro5 SoCal meet and greet. Enjoy!!!

Camarofan69 · 07-27-2009, 05:53 PM

is it me or does the bowtie in the billet grille look as it is to high on the grille?

or is it a optical illusion

KashR.K. · 07-28-2009, 02:24 AM

I neeeed that shifter...actuallty i need two of those shifters

tsnow · 07-28-2009, 02:43 AM

Brian, looks like you have done a fine job getting these out! A few other ideas to toss out for the grills- for the full phantom how about tieing together the top and bottom bars along the side enclosing the rest of the bars. Would give maybe a 'finished' look? Also, what do you think about one that covers the turn signals, but is cut to match the rounded inside edge of the headlight bezels? wouldnt fit flush but may look good also. Really like the phantom though!

Blakout · 07-28-2009, 03:49 AM

On the positive side...
I love that shifter....

But on the negative side...
I'm sorry, not trying to be rude, but this is what comes to mind with that billet grille:

Defenderworx · 07-28-2009, 05:51 PM

Quote:

Originally Posted by KashR.K.

I neeeed that shifter...actuallty i need two of those shifters

Ha, we are working as fast as we can and hopefully within about a 6-7 weeks or so they will be completely finished and licensed by General Motors.

*The_Blur* · 07-29-2009, 01:19 AM

I am loving that black grill. I will be rocking that all the way over my headlights if you can post a picture showing that the HIDs are not significantly affected at night. If this is a problem, I still might find a way to work around it. That black full length grill is classic.

Jericho · 07-29-2009, 05:48 AM

Quote:

Originally Posted by Defenderworx

Here are the rest of the pictures from the Camaro5 SoCal meet and greet. Enjoy!!!

Those Lambo Doors are actually tight. I didn't think they'd look that good on the car.

Quote:

Originally Posted by Defenderworx

Ha, we are working as fast as we can and hopefully within about a 6-7 weeks or so they will be completely finished and licensed by General Motors.

ME TOO !!!!!

tribone · 07-30-2009, 02:57 AM

First I want to take thank everyone at DefenderWorx for the great hospitality. (Brian, Ted, Cathy, Tim, and Alex. You guys are awesome!!) Thank you for making my wife and I feel like one of the family. It was a great experience and I will go back for more accessories in the near future.

The quality and feel of the products is incredible.

I was expecting a sticker or something cheap but I was pleasantly surprised.

Nice job guys.

And now for how it looks, well, they look incredible.
I got the Black Front and Rear Bowtie, Black Side SS Badges (I put them on the hood), Black Locking Fuel Door, and Black Side Vent Inserts (forgot to take pictures of those). I am extremely pleased and is just waiting for the Chrome Logo Gear Shifter from them.

I also got the Darkened Covers for the Headlights and the Taillights.

So now the pictures. Sorry if they're not the best, I need a new camera.

FamousZ · 07-30-2009, 12:17 PM

Use some rubbing alcohol and get those GTS stickers off the black covers...

tribone · 07-30-2009, 08:54 PM

Quote:

Originally Posted by FamousZ

Use some rubbing alcohol and get those GTS stickers off the black covers...

Thanks!!

Defenderworx · 07-31-2009, 05:23 PM

Hey everyone we finally started the interior of our Black LT Camaro. So as promised here are a few pictures. Caution these might make some of you Camaro lovers distressed to see the seats and insides all torn apart but do not worry because when it is finished it will be completely re-done with black leather and red stitching, as well as red suede throughout the dash. All of the pieces of suede are hand cut. I will post more as soon as they finish it!

07-27-2009, 05:24 PM	#632
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Hey guys here are some pictures from the Camaro5 meet and greet on Saturday. The first two pictures are from the Cars & Coffee car show on Saturday. After that the next picture is of Ron from Zoomers and rest of the pictures after that are all of Guillermo who runs Camaro5.com and who we all need to thank for this wonderful site! Thank you Guillermo for all the time and effort than you put into Camaro5 we all appreciate a lot! Attached Images __________________

07-27-2009, 05:40 PM	#633
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Here are the rest of the pictures from the Camaro5 SoCal meet and greet. Enjoy!!! Attached Images __________________

07-28-2009, 03:49 AM	#637
Blakout Drives: 2016 Camaro 2SS NPP Join Date: Jul 2009 Location: San Diego Posts: 596	On the positive side... I love that shifter.... But on the negative side... I'm sorry, not trying to be rude, but this is what comes to mind with that billet grille: __________________

07-29-2009, 01:19 AM	#639
The_Blur Moderator Drives: 2018 Harley-Davidson Street Bob Join Date: Nov 2007 Location: San Diego Posts: 14,768	I am loving that black grill. I will be rocking that all the way over my headlights if you can post a picture showing that the HIDs are not significantly affected at night. If this is a problem, I still might find a way to work around it. That black full length grill is classic. __________________ RDP Motorsport//GEN5DIY//Cultrag Performance//JPSS//Rodgets Chevrolet// Operation Demon//Buy at Invoice//RACECARWEAR RESPECT ALL CARS. LOVE YOUR OWN. warn 145:159 ban

07-30-2009, 02:57 AM	#641
tribone Searchin' .... Drives: Powered by Bowtie Join Date: Jun 2008 Location: Camaroville Posts: 6,229 View My Garage	DefenderWorx Rocks First I want to take thank everyone at DefenderWorx for the great hospitality. (Brian, Ted, Cathy, Tim, and Alex. You guys are awesome!!) Thank you for making my wife and I feel like one of the family. It was a great experience and I will go back for more accessories in the near future. The quality and feel of the products is incredible. I was expecting a sticker or something cheap but I was pleasantly surprised. Nice job guys. And now for how it looks, well, they look incredible. I got the Black Front and Rear Bowtie, Black Side SS Badges (I put them on the hood), Black Locking Fuel Door, and Black Side Vent Inserts (forgot to take pictures of those). I am extremely pleased and is just waiting for the Chrome Logo Gear Shifter from them. I also got the Darkened Covers for the Headlights and the Taillights. So now the pictures. Sorry if they're not the best, I need a new camera. __________________ -Guillermo My Pictures

07-27-2009, 05:53 PM	#634
Camarofan69 The Autoglass Guy Drives: 1969 SS 396, 1969 SS , 2010 RS Join Date: May 2009 Location: Corvallis MT Posts: 869 View My Garage	is it me or does the bowtie in the billet grille look as it is to high on the grille? or is it a optical illusion

07-28-2009, 02:24 AM	#635
KashR.K. Drives: 1lt/RS and 2SS/RS Join Date: Jul 2009 Location: TomBall Posts: 3	I neeeed that shifter...actuallty i need two of those shifters

07-28-2009, 02:43 AM	#636
tsnow Drives: 12' ZL1, AGM 6M Join Date: Jun 2009 Location: 49th state Posts: 249	Brian, looks like you have done a fine job getting these out! A few other ideas to toss out for the grills- for the full phantom how about tieing together the top and bottom bars along the side enclosing the rest of the bars. Would give maybe a 'finished' look? Also, what do you think about one that covers the turn signals, but is cut to match the rounded inside edge of the headlight bezels? wouldnt fit flush but may look good also. Really like the phantom though!

07-30-2009, 12:17 PM	#642
FamousZ Drives: 2000 Camaro Z28 Join Date: Jun 2009 Location: Indiana Posts: 5	Use some rubbing alcohol and get those GTS stickers off the black covers...

07-31-2009, 05:23 PM	#644
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	Hey everyone we finally started the interior of our Black LT Camaro. So as promised here are a few pictures. Caution these might make some of you Camaro lovers distressed to see the seats and insides all torn apart but do not worry because when it is finished it will be completely re-done with black leather and red stitching, as well as red suede throughout the dash. All of the pieces of suede are hand cut. I will post more as soon as they finish it! Attached Images __________________