Camaro V6 Owners Which CAI do u have? - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

OMEN · 02-10-2015, 12:32 AM

Quote:

Originally Posted by iPhoneNerd

Cold air inductions?
K&N?
Phastek?

how's the sound? Did you noticed a more aggressive sound with the CAI then you did with a stock exhaust?

If you could switch CAI brands.. would you?

Thanks

hello dear

i had K&N with SLP it was amazing it sound more clear and agressive.
but i sold it coz it was for the LLT engine and mine LFX
now i will buy another 1 i think i will go with roto-fab every1 speak about it

02-10-2015, 11:03 AM

I have the KN 69 typhoon version, I love the noises that the engine makes with the new intake. I don't know if it can really be called a CAI since it sits in the same spot as the spot intake but it definitely sucks in more air. I'll probably wrap the shield in foil for even better heat protection.

1Coopgt · 02-22-2015, 05:00 PM

Quote:

Originally Posted by GRAD2014RS

K&N

Looks good . Mine is due here tomorrow .

kevinw · 02-22-2015, 07:11 PM

i have rotofab i bought from a camaro5 member.

Danthuyer · 02-23-2015, 10:29 PM

can us aussies also share our intake systems ?? as I have a ripper of DIY job that is far from pretty but it works

1Coopgt · 02-24-2015, 05:10 PM

Installed my K&N after work today . It warmed up to 26 degrees out .

I'm also thinking the previous owner had a CAI on the car and removed it before trading the car in . The MAF sensor was loose on the stock air intake .

45thCamaro · 02-25-2015, 08:15 AM

Quote:

Originally Posted by 1Coopgt

Installed my K&N after work today . It warmed up to 26 degrees out .

I'm also thinking the previous owner had a CAI on the car and removed it before trading the car in . The MAF sensor was loose on the stock air intake .

You may want to shave the bottom piece of your engine cover so it doesn't run against the intake tube. I didn't on mine and rubber a little of the chrome off.

02-25-2015, 09:10 AM

If you don't trim the cover it also rattles a little bit when you accelerate hard.

easyfame · 02-25-2015, 09:17 AM

I have the CAI Intake. Definitely makes a "suction" noise when you step on the pedal rather hard. Other then that I can't say it changed the sound because I put it on at the same time as my exhaust. :(

1Coopgt · 02-25-2015, 06:31 PM

Quote:

Originally Posted by 45thCamaro

You may want to shave the bottom piece of your engine cover so it doesn't run against the intake tube. I didn't on mine and rubber a little of the chrome off.

Quote:

Originally Posted by sbear

If you don't trim the cover it also rattles a little bit when you accelerate hard.

Thanks For the advice guys ! I'll take care of it tomorrow .

judkins75 · 02-25-2015, 08:40 PM

I have the k&n cold air intake typhoon. Very aggressive sound. I have the mrtv2 with custom dyno tune. Very different car now.

Roto-fab 1 · 04-08-2015, 11:02 AM

Quote:

Originally Posted by hzisfrom1994

Rotofab, I like the look of the Rotofab than the CAI. I felt increase of power, but sound I am not sure cuz when I installed the rotofab, I already had a MRT V1(which is very LOUD). So I really cant tell. Just go with the look u want under the hood, they provide very similar perfomance gains actually!

Quote:

Originally Posted by JantzenOKC

I liked my roto-fab when I had it. I thought it was the best looking of all the cold air intakes. and it was color matched. I was afraid of the CAI brand because it had that plastic window and I thought it would look like crap after a year or so. Cant really go wrong with either one though.

Quote:

Originally Posted by JantzenOKC

Filters on turbos!

I've never heard anything but the rotofab so I can't really compare it to anything else but I've heard that rotofab is the loudest. I loved mine.

Quote:

Originally Posted by KILLA BEE

I did a lot of comparisons a lot !!!!!!rotofab won hands down 😀

Quote:

Originally Posted by Homer2

Rotofab... I liked the look. The whoosh when you step on it is a "take it or leave it" sortof thing for me.

Quote:

Originally Posted by 911medic

1. RotoFab.

2. The sound with the stock exhaust was awesome. Great intake growl. With aftermarket exhaust (I added after the intake), it's less noticeable.

3. No.

Quote:

Originally Posted by Zig Zag

I went with Roto-Fab because I liked the looks of it over CAI.
I removed the big Roto-fab sticker...
I saw a Mustang that had an Air Raid cai, it had more of a factory look to it. I thought it looked pretty slick. You may want to check into that.

Quote:

Originally Posted by ogre

Roto-Fab with MBRP catback exhaust. That growl under the hood gets louder at 4000 RPM and higher...sounds awesome...

Quote:

Originally Posted by 911medic

The Roto Fab by itself requires no drilling, cutting, or washer reservoir relocation.

Most of these intakes draw air from below, however, and the washer bottle does block a large volume below the air box. Relocating it opens up a large airflow path.

The only intake mod I've done that required cutting was the air scoop.

Quote:

Originally Posted by 2Fr3shKicks

I currently have a BBK intake but will be dealing it out with a Roto-Fab

Quote:

Originally Posted by kevinw

i have rotofab i bought from a camaro5 member.

Wow! Thanks for all of the support! We really appreciate it!!

LBJ · 04-08-2015, 02:00 PM

I have cold air induction

seven · 04-08-2015, 03:17 PM

Cold Air Inductions. Have factory performance exhaust. Huge difference in sound....she growls now. Fast response on throttle also. LOVE IT!!

02-24-2015, 05:10 PM	#62
1Coopgt Drives: All Black 2012 1LS Join Date: Feb 2015 Location: Rochester,NY Posts: 2,042 View My Garage	Installed my K&N after work today . It warmed up to 26 degrees out . I'm also thinking the previous owner had a CAI on the car and removed it before trading the car in . The MAF sensor was loose on the stock air intake . Attached Images

02-25-2015, 09:17 AM	#65
easyfame Drives: 2013 Camaro LFX Join Date: Jan 2013 Location: California Posts: 119	I have the CAI Intake. Definitely makes a "suction" noise when you step on the pedal rather hard. Other then that I can't say it changed the sound because I put it on at the same time as my exhaust. :( __________________ 2013 1LS Black Mods MRT V2 Axle Back, Cold Air Inductions Intake, Vitesse Throttle Controller, 20" Voxx SS Wheels Matte Black, Blacked Out Bowtie, Side Markers, Taillight Bezels, Front Bowtie Delete, 1LE Suede Steering Wheel, Shift Knob and boot. 4-Pack Gauge Cluster, Fog Lights

04-08-2015, 02:00 PM	#69
LBJ Drives: 2012 camaro 1LS. M6 Join Date: Sep 2012 Location: Lithopolis OHIO Posts: 512	I have cold air induction __________________ Mods..mrt v2. Cai intake v max throttle body. 20% windo tint & RX catch can Gianna 20in rims nitto 555 & afterburner tail lights RS halo head lights & gm heat extractor 4 pack gauges & panted heritage Grille & zl1rear sproler t5 splitter custom head rest

04-08-2015, 03:17 PM	#70
seven Drives: 2015 Camaro RS 2LT AGM Join Date: Aug 2014 Location: Florida Posts: 672	Cold Air Inductions. Have factory performance exhaust. Huge difference in sound....she growls now. Fast response on throttle also. LOVE IT!! __________________ 2015 RS Camaro 2LT with Sunroof, Performance Exhaust, Ground Effects, Tinted Windows, LED Fog Lights(DD), CAI Cold Air Intake, Ghosted Side Markers(Showstopper), Elite Catch Can, Xpel & SunTek PPF, Replica Z28 High Wing Spoiler, ZL1 Replica Wheels(Satin Black Factory Reproductions)

02-10-2015, 11:03 AM	#58
sbear Guest Posts: n/a View My Garage	I have the KN 69 typhoon version, I love the noises that the engine makes with the new intake. I don't know if it can really be called a CAI since it sits in the same spot as the spot intake but it definitely sucks in more air. I'll probably wrap the shield in foil for even better heat protection.

02-22-2015, 07:11 PM	#60
kevinw Drives: 2013 Black 2 LT vert Join Date: Jul 2013 Location: kansas city Posts: 1,764	i have rotofab i bought from a camaro5 member.

02-23-2015, 10:29 PM	#61
Danthuyer Drives: AUS Commodore SV6 Join Date: Feb 2015 Location: Sydney, AUS Posts: 18	can us aussies also share our intake systems ?? as I have a ripper of DIY job that is far from pretty but it works

02-25-2015, 09:10 AM	#64
sbear Guest Posts: n/a View My Garage	If you don't trim the cover it also rattles a little bit when you accelerate hard.

02-25-2015, 08:40 PM	#67
judkins75 Silver Shark Drives: 2014 2SS GM Npp 6 speed manual Join Date: Nov 2014 Location: Wyoming Posts: 131 View My Garage	I have the k&n cold air intake typhoon. Very aggressive sound. I have the mrtv2 with custom dyno tune. Very different car now.