Spoilers anyone? - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rideskinz · 10-16-2012, 11:18 AM

Quote:

Originally Posted by MyKuLLSKI

How high are you looking to go? I would like to fit more than my hand underneath it to dry it after a car wash. ~6in

Yeah, that's exactly what I was thinking. Enough to fit your hand under the wing. It'll probably be about the same as the Firebreather, maybe a little less. I'll have to see how high it is once we get it in our hands

Dtrimpi87 · 10-16-2012, 11:21 AM

Quote:

Originally Posted by Rideskinz

Yeah, that's exactly what I was thinking. Enough to fit your hand under the wing. It'll probably be about the same as the Firebreather, maybe a little less. I'll have to see how high it is once we get it in our hands

Well hurry up!

Rideskinz · 10-16-2012, 03:32 PM

Quote:

Originally Posted by Dtrimpi87

Well hurry up!

Waiting for the Firebreather to get shipped here

Rideskinz · 10-16-2012, 04:51 PM

We're looking for a local (SoCal) Camaro with a stock trunk lid to do prototyping. We'll need the car for approximately 5 days to do test fitting of the wing. The car will be returned in the same condition is was received. In return for letting us use your car, you'll receive a 50% discount on the new wing once it goes into production. PM if interested...Thanks!

HP_atTheWheels · 10-16-2012, 05:06 PM

The pictures look awesome. I think being able to get your hand under it for detailing would be perfect height. Plus being able to use the factory holes on my SS means money saved for another mod.

Dtrimpi87 · 10-16-2012, 05:10 PM

Quote:

Originally Posted by Rideskinz

We're looking for a local (SoCal) Camaro with a stock trunk lid to do prototyping. We'll need the car for approximately 5 days to do test fitting of the wing. The car will be returned in the same condition is was received. In return for letting us use your car, you'll receive a 50% discount on the new wing once it goes into production. PM if interested...Thanks!

Where at in so cal? And by stock trunk lid do you mean without the factory spoiler? Or just the factory trunk lid and no after market?

MikeMoach · 10-16-2012, 07:09 PM

I think I see the ball starting to roll

Rhyder · 10-16-2012, 09:02 PM

Quote:

Originally Posted by Rideskinz

Waiting for the Firebreather to get shipped here

After your done with the firebreather, let me know, I can probably take it off your hands so it doesnt just sit around cluttering up your shop....Im just that nice of a guy...

on a serious note, if you plan on reselling it after you are done let me know.....

Rideskinz · 10-16-2012, 09:28 PM

Quote:

Originally Posted by HP_atTheWheels

The pictures look awesome. I think being able to get your hand under it for detailing would be perfect height. Plus being able to use the factory holes on my SS means money saved for another mod.

Thanks! Yeah, I'll definitely be making it "hand width height" haha... Plus it will be considerably lighter than the Firebreather. That thing weighs in at 15 pounds! The Aggressor trunk spoiler only weighs 4-5 pounds and its also fiberglass. I'm thinking the new wing design will weigh around 7 pounds (fiberglass) and the carbon fiber version will be around 5

Quote:

Originally Posted by Dtrimpi87

Where at in so cal? And by stock trunk lid do you mean without the factory spoiler? Or just the factory trunk lid and no after market?

Check your PM...stock trunk lid, preferably without the spoiler, but I can also remove it. Basically I need to mount the new wing and make sure the holes in the trunk line up

Quote:

Originally Posted by MikeMoach

I think I see the ball starting to roll

Yup...

Quote:

Originally Posted by Rhyder

After your done with the firebreather, let me know, I can probably take it off your hands so it doesnt just sit around cluttering up your shop....Im just that nice of a guy...

on a serious note, if you plan on reselling it after you are done let me know.....

I've had so many people ask me the same thing...haha Its actually not my spoiler to sell, it belongs to one of the members of this forum. I'm just borrowing it for a bit for R&D

Rhyder · 10-16-2012, 09:32 PM

well ive got my yearly pot for mods to spend and im deciding on what to get as its not limitless.....Ill be holding off till you get this ramped up though....looking forward to it..

MGD · 10-16-2012, 09:50 PM

Can we somehow combine those 2 threats of Firebreather fever into 1. Just thinking..

sam.u.el · 10-16-2012, 09:52 PM

when its all finished and ready to produce, you can put me down as #1 for a Carbon Fiber Version

Do you have any idea or ballpark gestimate on how much both spoilers will cost by any chance?

Rideskinz · 10-17-2012, 10:54 AM

Quote:

Originally Posted by Rhyder

well ive got my yearly pot for mods to spend and im deciding on what to get as its not limitless.....Ill be holding off till you get this ramped up though....looking forward to it..

Sounds good

Quote:

Originally Posted by MGD

Can we somehow combine those 2 threats of Firebreather fever into 1. Just thinking..

I'll post a link in the other thread to this one

Quote:

Originally Posted by sam.u.el

when its all finished and ready to produce, you can put me down as #1 for a Carbon Fiber Version

Do you have any idea or ballpark gestimate on how much both spoilers will cost by any chance?

Will do

PM me for an estimate on pricing

MikeMoach · 10-18-2012, 08:47 PM

Any note worthy updates?

10-16-2012, 09:50 PM	#67
MGD Drives: 16 Camaro SS Join Date: Jul 2012 Location: Menifee Posts: 820	Can we somehow combine those 2 threats of Firebreather fever into 1. Just thinking.. __________________ Interior: Adrenaline Red. SS/2SS, M6, NPP, Sun Roof, 8" Nav. Black 5 Spoke Wheels.

10-16-2012, 04:51 PM	#60
Rideskinz Drives: SS, ZL1, V6 Join Date: Jan 2012 Location: So Cal Posts: 836	We're looking for a local (SoCal) Camaro with a stock trunk lid to do prototyping. We'll need the car for approximately 5 days to do test fitting of the wing. The car will be returned in the same condition is was received. In return for letting us use your car, you'll receive a 50% discount on the new wing once it goes into production. PM if interested...Thanks!

10-16-2012, 05:06 PM	#61
HP_atTheWheels Drives: 06 Vette Join Date: Oct 2012 Location: FL Posts: 230	The pictures look awesome. I think being able to get your hand under it for detailing would be perfect height. Plus being able to use the factory holes on my SS means money saved for another mod.

10-16-2012, 07:09 PM	#63
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 1,354	I think I see the ball starting to roll

10-16-2012, 09:32 PM	#66
Rhyder Drives: 2012 45 Anniversary Vert Join Date: Apr 2012 Location: atlanta Posts: 2,511	well ive got my yearly pot for mods to spend and im deciding on what to get as its not limitless.....Ill be holding off till you get this ramped up though....looking forward to it..

10-16-2012, 09:52 PM	#68
sam.u.el Drives: 2012 2SS/RS Rally Yellow w/ blk Join Date: May 2012 Location: Oregon Posts: 398 View My Garage	when its all finished and ready to produce, you can put me down as #1 for a Carbon Fiber Version Do you have any idea or ballpark gestimate on how much both spoilers will cost by any chance?

10-18-2012, 08:47 PM	#70
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 1,354	Any note worthy updates?