03-12-2014, 02:13 PM | #57 |
HTCC Member
|
Matt (FSP) finished up 2 hours ago and did a great job. I'll post up the graph tonight, he got me 425 rwhp /419 tq
__________________
|
03-12-2014, 04:06 PM | #58 |
Drives: 2013 Black Camaro 2SS/RS Convert. Join Date: Jun 2013
Location: Sauk Village, Illinois
Posts: 506
|
Great build.
__________________
2013 Camaro 2SS/RS-Smoked tail lights and side markers, HID log lights, & LED lighting inside/outside the car, SJM LED Cupholder, SJM full dashboard ABL lighting, ZL1 Rockers, 1LE Splitter, Showstopper LED Mirrors, Showstopper LED Side Markers, & Showstopper Heat Extractor Hood, 20" Niche Concourse ZL1 Styled wheels 20X8.5 & 20X10 with 275/40/20 & 315/35/20 Nitto Invos, Black Gorilla Lug Nuts/Locks, Black Billet Elite Camaro License Plate Holder, and Hydro Dipped Speedo/Shifter/AC-Heat Bezels.
|
03-12-2014, 10:11 PM | #59 |
HTCC Member
|
Thanks man ! My car feels so much better now after the tune, the idle is smoother, Matt deleted the 1-4 skip shift and it set the fans to turn on earlier.
__________________
|
03-13-2014, 11:42 AM | #60 |
HTCC Member
|
so here are the official numbers
- Stock (no MOD's) = 376 RWHP - CAI+scoop w/h VMaxx Throttle body = 383 RWHP - TSP headers w/h ARH 3" X-pipe + HF Cats = 402 RWHP - Matt (FSP) Tune = 425 RWHP
__________________
|
03-13-2014, 12:49 PM | #61 |
Drives: 2017 Z06 / 2012 CTS Join Date: Jul 2013
Location: NY
Posts: 731
|
Sweet car man! Model adds are great touch!
|
03-14-2014, 12:57 AM | #62 |
HTCC Member
|
Thanks! now that I have the basic performance bolt-ons done I'm going to concentrate on some cosmetic mods
__________________
|
03-14-2014, 03:58 AM | #63 |
Drives: '14 2SS/RS Vert 6M/KTU/NPP/DTA/ARH Join Date: Jan 2014
Location: Indianapolis
Posts: 2,826
|
Sapper-love your thread and what you've done with your car, thanks for sharing it. I especially like your step by step dyno runs. It is very instructive to see where the real power comes from (your tuner) and the bloated claims by the aftermarket go-fast parts guys. Nice job. My car is headed for similar perf mods although the fact that it's a vert complicates things a little on the exhaust build. From what I've seen on other builds, 425 rwhp is a good result from these mods and that's about where I want my car to end up.
__________________
Consensus is, by definition, a lack of leadership.
|
03-14-2014, 12:02 PM | #64 | |
HTCC Member
|
Quote:
I wanted to documented my progress because I wanted to see the HP gains in increments and were my money went. Just got tired of seeing threads were people get a stock car and next thing you know they are pushing 500 HP. I'm going to tackle a custom cam next , showing HP gains , torque and drive ability . FYI .... Have 23k miles on stock tires and expect to get another 4k miles out of them before I need to replace them.
__________________
Last edited by Sapper12b; 03-15-2014 at 02:54 AM. |
|
05-02-2014, 07:23 PM | #65 |
HTCC Member
|
Took advantage of C5 And got some work done on the SS....
__________________
|
05-02-2014, 07:24 PM | #66 |
HTCC Member
|
Before the install ...
__________________
|
05-03-2014, 09:06 PM | #67 |
HTCC Member
|
Before HEX Vents for comparison ....
.
__________________
|
06-15-2014, 05:25 PM | #68 |
HTCC Member
|
I discovered today that the ACS T4 chin splitter is not designed to withstand high speeds. I was on the highway heading to work and hit a pocket of high cross wind. Next thing I know I hear a loud thump and see the splitter in my rear view mirror floating away.
__________________
Last edited by Sapper12b; 06-30-2014 at 01:53 AM. |
07-30-2014, 08:30 PM | #69 |
HTCC Member
|
Got my R1 Concept rotors installed with new stainless steel brake lines.
Even painted the slots and drilled holes black to make them pop!
__________________
|
07-30-2014, 08:53 PM | #70 |
Drives: 1/70 2013 BRM 2SS RS 1LE NPP NAV Join Date: Feb 2013
Location: Parrish, Florida
Posts: 1,082
|
Nice! get some Brembo decals for the calipers and you will be set.
__________________
|
|
|
|
|