Pre-Ordered MSD intakes? - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Slowhawk · 01-10-2015, 11:35 AM

That FAST intake was promised when they released the 102's years ago. Now, If they will fix there manifold material so it doesn't leak through the pours, that would be a good improvement.

Firefighter · 01-13-2015, 07:22 PM

So nothing yet? I'm making plans. I'll need to decide on a manifold eventually.

Taco Time · 01-14-2015, 06:41 AM

Quote:

Originally Posted by 1sick_eg

Hate to say I told you so. I read about the various release dates that MSD had announced at SEMA and they stated that the LS7 would be released first. I believe that the LS3 intake was one of the last ones to be released(I believe MSD said sometime in April). That was why I was irritated at Summit for baiting customers when they most likely KNEW that they wouldn't be released until later.

That's pretty crappy on their part. (Not sure if it's Summit's fault or MSD's.) There's a big difference in early January and Cinco de Mayo!

1sick_eg · 01-14-2015, 06:43 AM

Hopefully we can at least see some results on the ls7's here soon.

Unreal · 01-14-2015, 07:34 AM

The fast 102 is the same one, they are just releasing different runners for it so you can adjust the power band.

62nalide · 01-14-2015, 10:44 AM

Quote:

Originally Posted by Unreal

The fast 102 is the same one, they are just releasing different runners for it so you can adjust the power band.

How can it be the same? It'll have different runners different lid so it's not the same or what am I missing?

MaxKamai · 01-14-2015, 10:39 PM

Uses the same base and the same lid. Only difference is the length of the plastic runners inside. You will be able to buy just the shorter runners if you already have the FAST 102. The shorter the runner the higher in the rpm band it will make power ie. the shortest set they make will likely pick up 30 peak hp on a heads/cam car at the expense of some low end grunt.

Unreal · 01-15-2015, 07:48 AM

Quote:

Originally Posted by 62nalide

How can it be the same? It'll have different runners different lid so it's not the same or what am I missing?

Lid isn't different. In response to MSD they quickly SLA'd some different length runners to compete with the newer ones. They even said for 99% of the people, the original will be the best and only for 8k+revving crazy high RPM stuff will the new shorter runners be better than the normal long lones.

Firefighter · 04-05-2015, 08:13 AM

Bump, it's April...

Sent from my SM-G900V using Tapatalk

Jeff_SS · 04-05-2015, 10:29 AM

CMS knows their shit. Ryne and Mike did a great comparison.

http://www.corvetteforum.com/forums/...post1589346178

DemonZL1 · 04-11-2015, 04:13 PM

Just an FYI, Summit says 9/22 and jegs says 11/16 for release.

http://www.jegs.com/i/MSD+Ignition/121/2703/10002/-1

Summit was listing it as a release 4/5 last i checked.

Firefighter · 04-11-2015, 04:26 PM

Jesus... smdh

Sent from my SM-G900V using Tapatalk

62nalide · 04-11-2015, 04:26 PM

Yeah I gave up, I rather go LLSR

Firefighter · 04-11-2015, 04:27 PM

So it's a race to be last one out between MSD and Vararam...

Sent from my SM-G900V using Tapatalk

01-13-2015, 07:22 PM	#58
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	So nothing yet? I'm making plans. I'll need to decide on a manifold eventually. __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054

01-14-2015, 06:43 AM	#60
1sick_eg Drives: 14 Camaro 1LE,328i, and some Hondas Join Date: May 2014 Location: Virginia Posts: 799	Hopefully we can at least see some results on the ls7's here soon. __________________ 14' Camaro 1LE - Now self-tuned FRH ported heads, Cam Motion LL solid roller, Jesel rockers, Morel lifters, Kooks headers, Corsa exhaust, ADM intake, Stock compression/bore/stroke 551whp 504wtq

01-14-2015, 07:34 AM	#61
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	The fast 102 is the same one, they are just releasing different runners for it so you can adjust the power band. __________________ Nick Corvette Z06 -1200ish rwhp

01-14-2015, 10:39 PM	#63
MaxKamai Mad Ninja Skills Drives: 2011 Camaro SS/RS M6 Join Date: May 2010 Location: Las Vegas Posts: 187 View My Garage	Uses the same base and the same lid. Only difference is the length of the plastic runners inside. You will be able to buy just the shorter runners if you already have the FAST 102. The shorter the runner the higher in the rpm band it will make power ie. the shortest set they make will likely pick up 30 peak hp on a heads/cam car at the expense of some low end grunt. __________________ 2011 Camaro SS/RS M6 - 633whp/679tq Gave to the wife Custom stainless 2" primary headers / Custom stainless 3" header back exhaust / Hurst short shifter / ZEX nitrous kit / Vararam intake / Spohn chrome moly trailing arms / Sin City Performance Tune / SCP custom ground cam / SCP ported & polished heads New Car 2007 Corvette Z06 - Headers / Vararam / Magnaflow Catback / SCP Tune / Nitrous / BTR Stg IV Cam and Springs

04-05-2015, 08:13 AM	#65
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	Bump, it's April... Sent from my SM-G900V using Tapatalk __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054

01-10-2015, 11:35 AM	#57
Slowhawk Drives: 1999 Trans Am Join Date: Jul 2009 Location: Bridgewater,Ma Posts: 2,018	That FAST intake was promised when they released the 102's years ago. Now, If they will fix there manifold material so it doesn't leak through the pours, that would be a good improvement.

04-05-2015, 10:29 AM	#66
Jeff_SS "Cam Only" Drives: 2013 Camaro SS Join Date: Nov 2011 Location: Scottsdale, AZ Posts: 1,733 View My Garage	CMS knows their shit. Ryne and Mike did a great comparison. http://www.corvetteforum.com/forums/...post1589346178 __________________ 2013 AGM Camaro 2SS/RS M6 \| LSA Blower, 2.5" pulley, 10% lower, FIC1000's, Fore Innovations Twin Pump fuel system w/ Flex Fuel, CMS Custom Grind Cam, Kooks 1 7/8" headers w/ catless off-road pipes, NPP Exhaust, 3.91's, JLT ZL1 Intake, Prospeed Heat Exchanger \| Pfadt Suspension, 1LE Sway Bars \| DSS 1000hp axles \| Mickey Thompson ET Street R 305/45/18 \| Tuned by Ryne @ CMS E85: 734rwhp/636rwtq (mustang dyno)

04-11-2015, 04:13 PM	#67
DemonZL1 199 Drives: like a granny Join Date: Apr 2013 Location: Utah, USA Posts: 1,921	Just an FYI, Summit says 9/22 and jegs says 11/16 for release. http://www.jegs.com/i/MSD+Ignition/121/2703/10002/-1 Summit was listing it as a release 4/5 last i checked. __________________ 2024 Silverado ZR2 LZ0 Duramax 2021 Shock SS 1LE A10 www.youtube.com/@DemonWorksPerformance Anderson composites coupon code : Demon

04-11-2015, 04:26 PM	#68
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	Jesus... smdh Sent from my SM-G900V using Tapatalk __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054

04-11-2015, 04:26 PM	#69
62nalide Drives: 2013 SS Join Date: May 2013 Location: DFW Posts: 4,102	Yeah I gave up, I rather go LLSR __________________ https://frankensteined.net/ Martin@Frankensteined.net

04-11-2015, 04:27 PM	#70
Firefighter Drives: Black '13 2SS/RS/1LE w/NPP/NAV Join Date: Oct 2012 Location: Tampa by way of Miami... Posts: 4,934	So it's a race to be last one out between MSD and Vararam... Sent from my SM-G900V using Tapatalk __________________ My Build Thread... http://www.camaro5.com/forums/showthread.php?t=285054