NEW! Hellion "Top mount" SS dyno vid-726 RWHP! - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

HELLION TURBO · 01-04-2015, 03:09 PM

Quote:

Originally Posted by army1le

I Have long tube headers, with this kit it will have to be removed?

Yes, our system will replace your existing headers.

army1le · 01-04-2015, 03:12 PM

Do you guys ship your kit to APO address overseas? Do you offer military discount?

alaskacamaro · 01-04-2015, 04:15 PM

I am really looking forward to late April when I get this kit setup..

Approximately how many hours does it take to install from a professional shop?

ttshovel · 01-04-2015, 04:43 PM

On their engine power segment it showed install time as 10 hours. 4 hours disassembly and 6 hours installing.

Chevrolade · 01-04-2015, 11:33 PM

It also showed 603 rwhp not 726? Or am I missing something

ttshovel · 01-05-2015, 04:57 AM

Quote:

Originally Posted by Chevrolade

It also showed 603 rwhp not 726? Or am I missing something

This was done through stock cats! Their test car was through catless pipes.

HELLION TURBO · 01-05-2015, 06:55 AM

Quote:

Originally Posted by army1le

Do you guys ship your kit to APO address overseas? Do you offer military discount?

Yes we can, and yes we do offer a military discount.

Please email jeff@hellionpowersystems.com for more details.

HELLION TURBO · 01-05-2015, 06:59 AM

The original test vehicles were done with the stock cats and the stock exhaust. 6-7 psi made 600 rwhp. After the TV install, we installed full exhaust including cat delete pipes, and we made 729 rwhp.

Dustanmont · 01-05-2015, 04:48 PM

Can you post a picture of the engine bay with out the engine cover please. This is definitely the kit for me, but not a fan of the camaro engine cover even with the awesome Hellion plates.

pyroguy · 01-05-2015, 05:55 PM

I'm not much of a turbo guy, but this setup is FREAKING AWESOME looking! Not to mention the power! Good job, this thing is SWEET!

HELLION TURBO · 01-05-2015, 05:59 PM

Quote:

Originally Posted by Dustanmont

Can you post a picture of the engine bay with out the engine cover please. This is definitely the kit for me, but not a fan of the camaro engine cover even with the awesome Hellion plates.

Here is an install photo without the cover.

HELLION TURBO · 01-05-2015, 06:11 PM

Quote:

Originally Posted by pyroguy

I'm not much of a turbo guy, but this setup is FREAKING AWESOME looking! Not to mention the power! Good job, this thing is SWEET!

Thank you!

We have countless hours of R and D in this kit and we are very excited to bring this type of system to the SS crowd!

Unreal · 01-05-2015, 07:46 PM

I would assume those covers act as heat shields to protect the wires and coils and you really do want to run them though. I don't think they are there for looks.

gb2ss · 01-05-2015, 09:32 PM

Looks AWESOME! Is there enough room between tubes to route plug wires down to remote mounted coils? I think doing that and maybe some new valve covers would really make this look even better!

01-04-2015, 04:43 PM	#60
ttshovel Drives: 12 camaro ss, 72 chevelle, 91camaro Join Date: Dec 2013 Location: findlay,oh Posts: 2,069	On their engine power segment it showed install time as 10 hours. 4 hours disassembly and 6 hours installing. __________________ 12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel

01-05-2015, 04:48 PM	#65
Dustanmont Drives: 2012 M6 2SS/RS bolt on Join Date: May 2014 Location: Oklahoma Posts: 6	Hellion top mount system Can you post a picture of the engine bay with out the engine cover please. This is definitely the kit for me, but not a fan of the camaro engine cover even with the awesome Hellion plates. Last edited by Dustanmont; 01-05-2015 at 04:57 PM. Reason: Revise

01-05-2015, 05:55 PM	#66
pyroguy Started#gottalovethatblue Drives: ABM #831 Join Date: Apr 2013 Location: TN Posts: 6,943 View My Garage	I'm not much of a turbo guy, but this setup is FREAKING AWESOME looking! Not to mention the power! Good job, this thing is SWEET! __________________ '10 Camaro 2SS/RS \| Aqua Blue #831 of 3,903 \| Silver Stripes Check out my build thread

01-05-2015, 07:46 PM	#69
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	I would assume those covers act as heat shields to protect the wires and coils and you really do want to run them though. I don't think they are there for looks. __________________ Nick Corvette Z06 -1200ish rwhp

01-04-2015, 03:12 PM	#58
army1le Drives: 2014 CRT Camaro 2SS RS 1LE Join Date: Apr 2014 Location: Ramstein Germany Posts: 37	Do you guys ship your kit to APO address overseas? Do you offer military discount?

01-04-2015, 04:15 PM	#59
alaskacamaro Drives: 2012 2SS 45TH Anniversary Join Date: Mar 2012 Location: Kentucky Posts: 720	I am really looking forward to late April when I get this kit setup.. Approximately how many hours does it take to install from a professional shop?

01-04-2015, 11:33 PM	#61
Chevrolade Account Suspended Drives: 2010 2SS/RS Join Date: Jan 2013 Location: Texas Posts: 1,050	It also showed 603 rwhp not 726? Or am I missing something

01-05-2015, 06:59 AM	#64
HELLION TURBO Drives: Twin Turbo SS Join Date: May 2010 Location: Albuquerque, New Mexico Posts: 195	The original test vehicles were done with the stock cats and the stock exhaust. 6-7 psi made 600 rwhp. After the TV install, we installed full exhaust including cat delete pipes, and we made 729 rwhp.

01-05-2015, 09:32 PM	#70
gb2ss Drives: 2011 IBM 2ss/rs m6 Join Date: Apr 2012 Location: Houston,Tx Posts: 20	Looks AWESOME! Is there enough room between tubes to route plug wires down to remote mounted coils? I think doing that and maybe some new valve covers would really make this look even better!