JANNETTY RACING DIPSTICK & TUBE KITS 6L80E & 6L90E - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

PROGXP · 02-07-2018, 10:07 PM

Email sent Ted, I'd like to get one in Melbourne, Australia For a VF SS Sportswagon if possible!

JANNETTYRACING · 02-08-2018, 08:40 AM

Quote:

Originally Posted by PROGXP

Email sent Ted, I'd like to get one in Melbourne, Australia For a VF SS Sportswagon if possible!

Thank you for your email, Kris@jannettyracing.com is taking care of you.

Ted.

WoodBoss · 02-13-2018, 03:34 PM

I ordered one today for my 2010 SS L99. You said these are good for drag racing. Is the full mark at the normal factory full level or does it include the extra quart we put in for drag racing so we don't cavitate? Thanks

JANNETTYRACING · 02-13-2018, 03:42 PM

Quote:

Originally Posted by WoodBoss

I ordered one today for my 2010 SS L99. You said these are good for drag racing. Is the full mark at the normal factory full level or does it include the extra quart we put in for drag racing so we don't cavitate? Thanks

Our dipsticks are calibrated at the proper level to eliminate sucking air.

Ted.

PROGXP · 02-13-2018, 06:39 PM

Quote:

Originally Posted by JANNETTYRACING

Our dipsticks are calibrated at the proper level to eliminate sucking air.

Ted.

Thanks for clarifying that Ted. I'll check standard level v's your marks when I fit it, and then connect up the transmission cooler at the same time and top up accordingly.

I paid for mine this morning and look forward to receiving it Down Under shortly!

JANNETTYRACING · 02-14-2018, 07:50 AM

Quote:

Originally Posted by PROGXP

Thanks for clarifying that Ted. I'll check standard level v's your marks when I fit it, and then connect up the transmission cooler at the same time and top up accordingly.

I paid for mine this morning and look forward to receiving it Down Under shortly!

Thank you for your business sir.

Ted.

WoodBoss · 02-14-2018, 08:30 AM

Quote:

Originally Posted by JANNETTYRACING

Our dipsticks are calibrated at the proper level to eliminate sucking air.

Ted.

Thank for answering my question Ted.

Frank C.

JANNETTYRACING · 02-14-2018, 08:45 AM

Quote:

Originally Posted by WoodBoss

Thank for answering my question Ted.

Frank C.

You are very welcome, thank you for your business.

Ted.

LCPLPunk · 02-16-2018, 04:36 PM

FYI, the bolt that goes through the bracket is a 15mm.

hammdo · 02-16-2018, 04:43 PM

Quote:

Originally Posted by PROGXP

Thanks for clarifying that Ted. I'll check standard level v's your marks when I fit it, and then connect up the transmission cooler at the same time and top up accordingly.

I paid for mine this morning and look forward to receiving it Down Under shortly!

Worth EVERY penny...

-Don

LCPLPunk · 02-22-2018, 11:35 AM

Hey Ted, I just want to make sure I am checking my level right. I get the temp of the tranny gauge to 180, put vehicle in park, shift to each gear and hold for 3 seconds each then return to park. Vehicle remains on and then I check the level?

JANNETTYRACING · 02-22-2018, 12:18 PM

Quote:

Originally Posted by LCPLPunk

Hey Ted, I just want to make sure I am checking my level right. I get the temp of the tranny gauge to 180, put vehicle in park, shift to each gear and hold for 3 seconds each then return to park. Vehicle remains on and then I check the level?

Check in Neutral.

IASS · 02-22-2018, 06:48 PM

Just ordered mine and a scoop too

thanks for putting out a nice "factory" looking kit I hate the braided looking one.

PROGXP · 02-22-2018, 09:03 PM

Thanks Ted, delivered to me this morning in Australia and I will get it fitted to my VF Commodore this evening!

Parts look great!

02-16-2018, 04:36 PM	#65
LCPLPunk USA-1 Drives: 2010 Camaro SS L99 Join Date: Jul 2016 Location: Near DC Posts: 1,893 View My Garage	FYI, the bolt that goes through the bracket is a 15mm. __________________ "A Camaro in the garage is safe, but that's not what Camaros are built for..." R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete

02-22-2018, 11:35 AM	#67
LCPLPunk USA-1 Drives: 2010 Camaro SS L99 Join Date: Jul 2016 Location: Near DC Posts: 1,893 View My Garage	Hey Ted, I just want to make sure I am checking my level right. I get the temp of the tranny gauge to 180, put vehicle in park, shift to each gear and hold for 3 seconds each then return to park. Vehicle remains on and then I check the level? __________________ "A Camaro in the garage is safe, but that's not what Camaros are built for..." R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete

02-07-2018, 10:07 PM	#57
PROGXP Drives: VF Holden Commodore Join Date: May 2017 Location: Melbourne, Australia Posts: 6	Email sent Ted, I'd like to get one in Melbourne, Australia For a VF SS Sportswagon if possible!

02-13-2018, 03:34 PM	#59
WoodBoss "Old School" Drives: 2010 2SS L99 Join Date: Apr 2015 Location: Sherrills Ford, NC Posts: 1,294	I ordered one today for my 2010 SS L99. You said these are good for drag racing. Is the full mark at the normal factory full level or does it include the extra quart we put in for drag racing so we don't cavitate? Thanks

02-22-2018, 06:48 PM	#69
IASS Drives: 2014 ss Join Date: Dec 2017 Location: IA Posts: 149	Just ordered mine and a scoop too thanks for putting out a nice "factory" looking kit I hate the braided looking one.

02-22-2018, 09:03 PM	#70
PROGXP Drives: VF Holden Commodore Join Date: May 2017 Location: Melbourne, Australia Posts: 6	Thanks Ted, delivered to me this morning in Australia and I will get it fitted to my VF Commodore this evening! Parts look great!