Metra Kit Installs - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

phenixdragon · 11-16-2010, 08:21 AM

Here is the BMP file I used for my boot up on my Kenwood DNX0660. Should work on other Kenwoods also but I'm not sure which other models.

phenixdragon · 11-16-2010, 08:23 AM

Sorry, didn't attach. Too large of a file for this forum. If you guys want it, send me a PM with your email addy.

GJG · 11-17-2010, 11:45 PM

For those that have installed the Metra.....how well does it match the stock interior trim?

y2k king · 11-19-2010, 02:40 PM

just put my order in for a metra and a Pioneer AVH-P4200DVD.
also ordered the pioneer xm unit.
all for $674 at crutchfield.

xxlbeerz · 11-19-2010, 06:38 PM

Quote:

Originally Posted by y2k king

just put my order in for a metra and a Pioneer AVH-P4200DVD.
also ordered the pioneer xm unit.
all for $674 at crutchfield.

Just curious, what made you go with this over the NX500 deal?

y2k king · 11-19-2010, 08:41 PM

Quote:

Originally Posted by xxlbeerz

Just curious, what made you go with this over the NX500 deal?

ughhh...ford/chevy, harley/honda!!!

YOUNGnRECKLESS · 11-21-2010, 10:40 PM

do u need a harness to run a new headunit? i know my truck needed a specific harness between the factory wiring and the new headunit wiring. if i buy the metra kit and a new double din unit will I need anything else? thanks if anyone can help

liquidsmoke · 11-22-2010, 01:58 AM

Is this the absolute only option for getting a double din unit? As much as I want a better radio I can't bring myself to pay for metras kit. Are they planning on making it better or is it not really worth it to them.

Nitroman28 · 11-24-2010, 11:12 PM

I just installed this kit today, The directions say to remove the console, But don't waste your time. I just removed my bezel around the shifter, then just reach under the radio and push the plastic down and it will come out. same for install of the metra trim piece.

Install was basic if your just doing the radio should only take about 1hr.

I installed Stereo, XM receiver, Backup camera, ran ipod cable to console, and ran wires for sub amp, Took 2hrs to complete.

Then I spent 2hrs trying to get the steering wheel controls to work. Still cant get them to work.

Only complainant is the blue leds on the buttons, just don't match the car.

Nitroman28 · 11-24-2010, 11:18 PM

Quote:

Originally Posted by liquidsmoke

Is this the absolute only option for getting a double din unit? As much as I want a better radio I can't bring myself to pay for metras kit. Are they planning on making it better or is it not really worth it to them.

I got mine from Amazon for 191.00 free shipping.

http://www.amazon.com/Metra-99-3010S.../dp/B003GXLKA2

phenixdragon · 11-24-2010, 11:19 PM

Took me awhile to get the steering wheel controls to work too. I had to manually set each button to get it to work.

My biggest complaint is that the LCD is terrible at night. I like to have my dash as dim as possible and I just have it with 1 tick up where the doors just light up. But the Metra LCD I couldn't tell half of the icons on there so something like AC, I can't tell if it's on or off. I had to change it to a greenish color which works but doesn't match as I would like it. If I turn up the dash brightness all the way, the LCD looks great, but everything else is bright too.

phenixdragon · 11-24-2010, 11:19 PM

Quote:

Originally Posted by liquidsmoke

Is this the absolute only option for getting a double din unit? As much as I want a better radio I can't bring myself to pay for metras kit. Are they planning on making it better or is it not really worth it to them.

What is wrong with getting it? Works great.

Nitroman28 · 11-24-2010, 11:20 PM

Quote:

Originally Posted by YOUNGnRECKLESS

do u need a harness to run a new headunit? i know my truck needed a specific harness between the factory wiring and the new headunit wiring. if i buy the metra kit and a new double din unit will I need anything else? thanks if anyone can help

they send everything you need, Unless you want XM then you have to buy it, And an ipod cable for the stereo you pick.

phenixdragon · 11-24-2010, 11:20 PM

Quote:

Originally Posted by YOUNGnRECKLESS

do u need a harness to run a new headunit? i know my truck needed a specific harness between the factory wiring and the new headunit wiring. if i buy the metra kit and a new double din unit will I need anything else? thanks if anyone can help

You should have wiring harness with your radio. If not, than you need to buy one as you would with any other kit.

11-17-2010, 11:45 PM	#59
GJG Drives: 2SS Join Date: Apr 2009 Location: Beaumont, Tx Posts: 871 View My Garage	For those that have installed the Metra.....how well does it match the stock interior trim? __________________ Sleep well America.....my MARINE has your back......

11-19-2010, 02:40 PM	#60
y2k king Drives: 2011 ss camaro Join Date: Aug 2010 Location: spring hill, fl Posts: 1,705	just put my order in for a metra and a Pioneer AVH-P4200DVD. also ordered the pioneer xm unit. all for $674 at crutchfield. __________________ 10/28/2010 got it

11-21-2010, 10:40 PM	#63
YOUNGnRECKLESS Building the Beast Drives: 2010 VR LS3 Join Date: Oct 2010 Location: Queens, New York Posts: 1,398 View My Garage	do u need a harness to run a new headunit? i know my truck needed a specific harness between the factory wiring and the new headunit wiring. if i buy the metra kit and a new double din unit will I need anything else? thanks if anyone can help __________________

11-22-2010, 01:58 AM	#64
liquidsmoke Two Miles An Hour Drives: SIM 2LT RS Join Date: May 2010 Location: chicago Posts: 1,209	Is this the absolute only option for getting a double din unit? As much as I want a better radio I can't bring myself to pay for metras kit. Are they planning on making it better or is it not really worth it to them. __________________ expect nothing, but take everything

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
METRA DOUBLE DIN RADIO KIT FINALLY SHIPPING!	thespymaster	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	10	08-09-2010 04:06 AM
Metra Kit Bugs/Notes...	y2jdmbfan	Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum	3	04-14-2010 05:54 PM
ULTIMATE PERFORMANCE* TURBO Camaro SS -- 750hp Custom Single Turbo Kit (T04Z)	Ultimate Performance	Forced Induction - V8	496	10-11-2009 02:29 PM
5202 (H16 ; 9009) Slim HID Kits !!! 09-Up Camaro Fog Light HID kits !!!	HID_Guy	Exterior Parts & Accessories	19	09-08-2009 02:07 AM
2010 Camaro Fog/DRL Light 5202 HID kits ....	HID_Guy	Exterior Parts & Accessories	1	09-07-2009 01:19 PM

11-16-2010, 08:21 AM	#57
phenixdragon Drives: 2010 Camaro SS Join Date: Mar 2010 Location: Seattle, WA Posts: 781	Here is the BMP file I used for my boot up on my Kenwood DNX0660. Should work on other Kenwoods also but I'm not sure which other models.

11-16-2010, 08:23 AM	#58
phenixdragon Drives: 2010 Camaro SS Join Date: Mar 2010 Location: Seattle, WA Posts: 781	Sorry, didn't attach. Too large of a file for this forum. If you guys want it, send me a PM with your email addy.

11-24-2010, 11:12 PM	#65
Nitroman28 Drives: 2010 Camaro SS 416/4L80 Join Date: Oct 2010 Location: Arkansas Posts: 1,835 View My Garage	I just installed this kit today, The directions say to remove the console, But don't waste your time. I just removed my bezel around the shifter, then just reach under the radio and push the plastic down and it will come out. same for install of the metra trim piece. Install was basic if your just doing the radio should only take about 1hr. I installed Stereo, XM receiver, Backup camera, ran ipod cable to console, and ran wires for sub amp, Took 2hrs to complete. Then I spent 2hrs trying to get the steering wheel controls to work. Still cant get them to work. Only complainant is the blue leds on the buttons, just don't match the car.

11-24-2010, 11:19 PM	#67
phenixdragon Drives: 2010 Camaro SS Join Date: Mar 2010 Location: Seattle, WA Posts: 781	Took me awhile to get the steering wheel controls to work too. I had to manually set each button to get it to work. My biggest complaint is that the LCD is terrible at night. I like to have my dash as dim as possible and I just have it with 1 tick up where the doors just light up. But the Metra LCD I couldn't tell half of the icons on there so something like AC, I can't tell if it's on or off. I had to change it to a greenish color which works but doesn't match as I would like it. If I turn up the dash brightness all the way, the LCD looks great, but everything else is bright too.