ANNOUNCMENT: JDP Motorsports is Finalizing it's Color Changing RS Halo Package!

[infernostripes!]

I live in south texas Im just going to put silicon around the opening. Ill let you know how that goes. Everything is already done just need to add the silicon then put everything back together

[JDP Motorsports]

Originally Posted by StOrM TrOOpEr

i will call them tomorrow coz im off

Were we able to get your issue resolved? Please call, email or PM me anytime with questions. We appreciate your business and support.

Originally Posted by dmwhiteman

Anyone who is still having issues after gluing the remote, try putting the remote right against your bumper. I had mine 4-5 feet away and the colors would change a few times then the remote would stop working. I have been in contact with Jeremy and he was about to send me a whole new kit because they are so awesome! I did some more testing by putting the remote in contact with my bumper several inches from the module and it works flawlessly.

I am wondering if there is something in the bumper that restricts the signal. I was having the same problem with my new light bar. The remote would not work 5 feet from the light, but 2ft and closer works like a charm.

That is interesting. Have you tried replacing the battery in the remote? We appreciate your business and support.

Originally Posted by LS3 SS

I'm not sure, the consistency of the remote signal is weird at times ; I was able to get it to work at 12-15 feet away by holding the remote to my chin.

Metal fillings?!

Originally Posted by OKCwhiteKnight

Glued my remote, no change.I didn't see this working since the buttons were firmly glued to circuit board and I know I had good battery contact because of the red light working. Thought I'd give it a try anyway, still stuck on orange after a couple re-learns. I have been getting a slight flicker from the halos when I press a button. My issue may be more than the remote.

I will call you shortly. I apologize for the issues and we'll get it straightened out.

Originally Posted by LIM3

RE SEALED THE HEAD LIGHT. RAINED TODAY SO I FIGURED WHY NOT GO FOR A DRIVE AND WHAT HAPPEN? CONDENSATION AGAIN IN MY HEADLIGHTS.

I HAVE PRETTY MUCH HAD IT.

That is interesting. We had 1 issue locally but we resealed the light and it is fine now. Our test car is driven daily in all weather conditions and we've never had an issue. We can send out some sealing tape and that in conjunction with some silicon would probably take care of any issues. Please feel free to call, email or PM me anytime with questions.

Kind regards,

Jordan Priestley
888.308.6007

[LIM3]

Originally Posted by JDP Motorsports

Were we able to get your issue resolved? Please call, email or PM me anytime with questions. We appreciate your business and support.



That is interesting. Have you tried replacing the battery in the remote? We appreciate your business and support.



Metal fillings?!



I will call you shortly. I apologize for the issues and we'll get it straightened out.



That is interesting. We had 1 issue locally but we resealed the light and it is fine now. Our test car is driven daily in all weather conditions and we've never had an issue. We can send out some sealing tape and that in conjunction with some silicon would probably take care of any issues. Please feel free to call, email or PM me anytime with questions.

Kind regards,

Jordan Priestley
888.308.6007

more tape would be great

[cheech4235]

Have had mine installed for months now and they work great! Remote was replaced once and that was the only issue. Everybody who sees them, loves them. I leave them on the 7 color change mode at shows and they get a lot of attention and great comments.

[572HP]

Originally Posted by cheech4235

Have had mine installed for months now and they work great! Remote was replaced once and that was the only issue. Everybody who sees them, loves them. I leave them on the 7 color change mode at shows and they get a lot of attention and great comments.

Sorry. I'm not seeing any halos in this picture. One too many distractions.

Originally Posted by LIM3

more tape would be great

I second that. I could have used a little more.

[LIM3]

is there any way JDP will release some LED color shift strips to be in sync with our halos ? basically like the AAC kit. that would be awesome ?

[Rendo]

Finally received my replacement remote control after apparently sitting in the mail room for almost three weeks (darn APO system ). Was worried I wasn't going to get it at all because after JDP sent it out, USPS announced shipping Li batteries via APO/DPO is now illegal.

Anyways, the new remote worked great and the system is amazing. I'm not a huge fan that the white has a blue/purple tint, but its hardly ever going to be on white. Thanks JDP!

[chozn4service]

I would love to get another remote, just to have on hand as a back up. I mean you never know. Without it, you're fragged! Does anyone have an idea where they can be obtained outside of JDP? I'm sure they have them specifically for their kits.

[shootir]

I have been reading about everyone's problems and was happy for me that the only problem I had was the remote needing to be re-sealed. But now I am having another problem. When I have the halos on white the right side turns yellow after a second, cyan flips between cyan and green, purple flips between purple and red. The only colors that stay correct are red, green, blue, orange, and yellow. This only happens to the right side halo.
I am not happy. :(
Does anyone have similar problems or know a fix? I will obviously talk to JDP.

[chozn4service]

My halos stopped working all together and I've sent a message to JDP about it but I haven't gotten a respose yet. Seems that I have a bad switch. Seems like if I play with the wires on the back of the switch the halos go on and off. The connections look good and a tech I had at the house seems to think its the pins on the switch itself as we checked all connections, fuses and everything else with a meter box or ohm meter. Right now we've managed to get the halos on by manipulating the wire on the switch (which I believe its the center pin on the back of the switch) but a new switch seems to be the fix. Aside from that, I have no issues with mine and its a great product. I am scared though if I should loose the remote I could be fu*(%ked! and the reason I would like to secure a second one.

[572HP]

Originally Posted by shootir

I have been reading about everyone's problems and was happy for me that the only problem I had was the remote needing to be re-sealed. But now I am having another problem. When I have the halos on white the right side turns yellow after a second, cyan flips between cyan and green, purple flips between purple and red. The only colors that stay correct are red, green, blue, orange, and yellow. This only happens to the right side halo.
I am not happy. :(
Does anyone have similar problems or know a fix? I will obviously talk to JDP.

Not quite sure what is happening here. However, there are some clues. You mention white turns to yellow. White uses all three colors...red, green, and blue. Since it turns from white to yellow, that means that blue is dropping out. Yellow uses red and green. Also, cyan is green and blue, so it also sounds like blue is dropping out there too. I would suspect a bad connection for the blue wire, except you say that when you turn it to blue only, it works. Does blue also drop out of the magenta, leaving you with red? If blue always works by itself, then it sounds like a bad controller. It could also be a problem with the black wire from that halo (positive).

[JDP Motorsports]

Originally Posted by chozn4service

I would love to get another remote, just to have on hand as a back up. I mean you never know. Without it, you're fragged! Does anyone have an idea where they can be obtained outside of JDP? I'm sure they have them specifically for their kits.

We have extra remotes being built on the next run and they will be offered separately. We'll post them on our website as well as here on the forums once we get them; they will be about $25 including shipping.

Originally Posted by Rendo

Finally received my replacement remote control after apparently sitting in the mail room for almost three weeks (darn APO system ). Was worried I wasn't going to get it at all because after JDP sent it out, USPS announced shipping Li batteries via APO/DPO is now illegal.

Anyways, the new remote worked great and the system is amazing. I'm not a huge fan that the white has a blue/purple tint, but its hardly ever going to be on white. Thanks JDP!

No problem! That bis a bummer about the delay but I'm glad you got it! You can run the system through the fade and pause it on whatever color you'd like including white. When you turn them back on they will save that setting. Please feel free to call, email or PM me anytime with questions. We appreciate your support and have a great day!

Originally Posted by 572HP

Sorry. I'm not seeing any halos in this picture. One too many distractions.

I second that. I could have used a little more.

What Halos?!

We'll take not of that and include more tape going forward. We haven't had any issues here but with feedback we'll make adjustments.

Originally Posted by shootir

I have been reading about everyone's problems and was happy for me that the only problem I had was the remote needing to be re-sealed. But now I am having another problem. When I have the halos on white the right side turns yellow after a second, cyan flips between cyan and green, purple flips between purple and red. The only colors that stay correct are red, green, blue, orange, and yellow. This only happens to the right side halo.
I am not happy. :(
Does anyone have similar problems or know a fix? I will obviously talk to JDP.

We haven't had a ton of issues on the first run of Halo Kits and we've taken care of every issue we've been aware of. I responded to your PM with a few suggestions and the suggestions below are excellent as well. This is the first time I've heard of an issue like yours but we'll get it figured out.

Please feel free to call, email or PM me anytime with questions. We appreciate your support and have a great day!

Originally Posted by chozn4service

My halos stopped working all together and I've sent a message to JDP about it but I haven't gotten a respose yet. Seems that I have a bad switch. Seems like if I play with the wires on the back of the switch the halos go on and off. The connections look good and a tech I had at the house seems to think its the pins on the switch itself as we checked all connections, fuses and everything else with a meter box or ohm meter. Right now we've managed to get the halos on by manipulating the wire on the switch (which I believe its the center pin on the back of the switch) but a new switch seems to be the fix. Aside from that, I have no issues with mine and its a great product. I am scared though if I should loose the remote I could be fu*(%ked! and the reason I would like to secure a second one.

PM responded to and we'll get it sorted. We appreciate your business and support.

Originally Posted by 572HP

Not quite sure what is happening here. However, there are some clues. You mention white turns to yellow. White uses all three colors...red, green, and blue. Since it turns from white to yellow, that means that blue is dropping out. Yellow uses red and green. Also, cyan is green and blue, so it also sounds like blue is dropping out there too. I would suspect a bad connection for the blue wire, except you say that when you turn it to blue only, it works. Does blue also drop out of the magenta, leaving you with red? If blue always works by itself, then it sounds like a bad controller. It could also be a problem with the black wire from that halo (positive).

Great suggestions and thank you for taking the time to respond. This is the first issue we've had like this but we'll get it figured out. In our 10+ months of testing before the release we didn't have a lot of issues and all in all the issues have been limited. We've taken care of everyone who has contacted us and the next batch will be revised to address some of the initial issues we've had. Please feel free to call, email or PM me anytime with questions. We appreciate your interest in our products and have a great day!

Kind regards,

Jordan Priestley
888.308.6007

[ToddB]

Mine is working great. Wish the remote had more range though. Good product.

[Twonz360]

I'm selling my kit. Its still in the box brand new! PM if interested. I'm in Long Island NY.

Sent from my htc EVO LTE 4G using Tapatalk 2.