El Paso Chapter of Camaro5

[Char1ieone]

Saturday, April 4th, 2015
Cinemark West - 7440 Remcon Circle, El Paso, TX
XD Screening at (7:30PM/1930Hrs.)

MEET LOCATION: Cohen Stadium West Parking Lot
MEET TIME: 5:00PM/1700Hrs.
DEPART: 5:30PM/1730Hrs.

Howdy everyone, first off I would like to say that we here at Camaro5 EPLC were thrilled of everyone that was able to join us this past Friday at our monthly meet & greet. I was such a pleasure to see and meet each and everyone of you and also see your Camaros and the personal touches that you all have added to them. Now, without missing a beat we are at it again with another Camaro5 EPLC get together, this time we are going to the movies.

After a long wait it has finally arrived, the release of 'FURIOUS 7', the seventh installment in the ever popular Fast & Furious blockbuster franchise showcasing the most extreme stunts, gorgeous talent in Hollywood and of course... the most jaw-dropping automotives that are offered on the streets today. The film is the last of the late Paul Walker and we are hopeful that you, here on Camaro5 EPLC, will be able to join us in the screening of the movie this coming Saturday (April 4) on the Westside of El Paso at the Cinemark West Theaters.

The showing for the movie will be at 7:30PM in XD but as any blockbuster film, there will be lines, so if you are wishing to join us, we will be lining up for the film inside the theater at least an hour before the movie starts in hopes to get decent seating, because we all know how unpleasant it is to be in the front two rows while watching a film on those big screens, lol. This event is not in collaboration with Cinemark so there WILL NOT be any tickets distributed to us. We HIGHLY suggest that you get your tickets early for the 7:30 PM XD screening online here( TICKETS) before the day of the movie so you are not left out if the movie sells out.

For those that wish to join us from Las Cruces, we can meet at our usual Pic Quick meeting location on the corner of Don Roser and University and depart from there at about 30min. early.

We will meet at Cohen Stadium on the Northeast of El Paso at 5PM and depart from there at 5:30PM to get to the theater by 6PM. Departing from Cohen will give everyone easier access to exit right onto Gateway to access Transmountain westbound and then access I-10 Eastbound. Meeting and departing at these times will give us the proper time to park our cars and gather whatever it is that we need and be able to obtain decent seating for the movies. We will be parking a bit away from where everyone parks to avoid any type of "door denting incidents" so you may also want to be aware to also store your belonging either locked in your glove box or in the trunk, just to be safe.

If you have any questions or comments, please feel free to contact me either here on the Camaro5 EPLC Facebook Page or through my cell (575 649-4624). CHEERS!

MEMBERS JOINING:
Charlie (char1ieone)
David (Mr. Mean)
Cynthia
Ben (Benny B)
Luis (Garfield)
Randy
Diane
Jose

[Ivan @ Southwest Speed]

You guys are gonna love 7.....just sayin.

Great to have some El Paso love up in the house today. Thanks Ben!!

Ivan @ Southwest Speed

[ac223mal]

Originally Posted by Ivan @ Southwest Speed

We were carrying Race Ready Cutouts but its looking like they are getting out of the Cutout game and have changed owners. We haven't been contacted by them in some time so we jumped on the QTP Cutout wagon.

They aren't on the site but we do them yes. They're $524 installed for the Dual Low Profile kit.

Shoot us a PM if and when you're ready.

Ivan @ Southwest Speed

Do you guys deal with noweeds? The 90 day warranty on the QTP seems kinda short...

[Ivan @ Southwest Speed]

Originally Posted by ac223mal

Do you guys deal with noweeds? The 90 day warranty on the QTP seems kinda short...

Yup. We do NoWeeds cutouts as well. Even if you buy them and bring them to us we can help ya out.

I havent had many issues at all with the 5th Gen design low profile cutouts.

The 4th gen y pipe ones on the otherhand....

Let me know if we can help!
Ivan

[ac223mal]

Originally Posted by Ivan @ Southwest Speed

Yup. We do NoWeeds cutouts as well. Even if you buy them and bring them to us we can help ya out.

I havent had many issues at all with the 5th Gen design low profile cutouts.

The 4th gen y pipe ones on the otherhand....

Let me know if we can help!
Ivan

Do you guys carry noweeds or do I need to bring them in?

[ac223mal]

Originally Posted by Char1ieone

Saturday, April 4th, 2015
Cinemark West - 7440 Remcon Circle, El Paso, TX
XD Screening at (7:30PM/1930Hrs.)

MEET LOCATION: Cohen Stadium West Parking Lot
MEET TIME: 5:00PM/1700Hrs.
DEPART: 5:30PM/1730Hrs.

Thanks for info, trying to make it out there...

[jose1003]

Mr. Charles if nothing comes up,
we should be attending for the saturday gathering.

mr. ivan can you pm me price for just a camshaft and tune
wanted a afm and dod delete, but im having second thoughts or waht do you suggest

[Ivan @ Southwest Speed]

Originally Posted by jose1003

Mr. Charles if nothing comes up,
we should be attending for the saturday gathering.

mr. ivan can you pm me price for just a camshaft and tune
wanted a afm and dod delete, but im having second thoughts or waht do you suggest

Do you want a quote on a LS3 or VVT Cam? At the end of the day, the packages are about the same in cost but I'll hook ya up.

I like the LS3 swaps right now only because there are a crapload of options. There are not so many VVT Options. Out of the VVT Options, the GPI SS3 is the ducks nuts. Weve done a couple of them, one El Paso car, and they make good torque imho. Worth the time.

Either really big/good camshaft would need a Torque Convertor upgrade to see it's true potential. There are some "mild" camshaft options out there that wouldn't require them and make 45 to 50 rwhp too.

Lemme know what your goals are with the Camaro and I'll line you up right sir.

Thanks Guys!
Ivan @ Southwest Speed

[Char1ieone]

Originally Posted by ac223mal

Thanks for info, trying to make it out there...

Originally Posted by jose1003

Mr. Charles if nothing comes up,
we should be attending for the saturday gathering.

mr. ivan can you pm me price for just a camshaft and tune
wanted a afm and dod delete, but im having second thoughts or waht do you suggest

GREAT TO HEAR! I will continue to post all updated information on hear if anything changes.

[mothraisnotapokemon]

Is anyone going to the avenger double feature on April 30th?

[Char1ieone]

They're doing an Avengers 1 & 2 showing?

[mothraisnotapokemon]

Yeah at tinseltown. It's at 4

[Char1ieone]

I wanted to do the 27hr marathon they were having out at the AMC in Phoenix. Don't think I would've lasted but would have been killer anyways, lol.

[jose1003]

So who's going tomorrow, ordered tickets