07-28-2015, 02:50 PM | #785 |
Thanks TonyNo did my footwell lighting today took about an hour to do.
Also thank you CyberGreyConvertible for the link to the video, it helped. May have to adjust the lights a little to see how the lighting effect is tonight at work. I went with Oznium blue 5050 SMD's one on each side, depending how it looks may add one more to each side. |
|
07-29-2015, 09:47 AM | #786 |
Drives: '16 2SS Join Date: Apr 2011
Location: Chicago Suburbs
Posts: 2,271
|
Nice job!
|
01-11-2016, 11:06 AM | #787 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
Above the gas pedal are some wires. Look for the gray wire( done light). Use a T connector and tap into this wire. It will work just like the dome light. A little hard to get to, but it works fine. The ground can be attached to a screw you'll find on the side of the center tunnel.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
02-25-2016, 08:35 PM | #788 |
Drives: 2013 2SS in AGM Join Date: Feb 2016
Location: H-town
Posts: 30
|
Does anyone know what the BCM X7 connector (2013 2SS) uses for terminating the target gray wire? I would like to install a jumper between it and its insert location in X7, connecting from the jumper to my Footwell LEDs. Just my personal preference to keep the OEM harness intact. I need some G2 for getting the right pin and socket contacts (and crimper). Your help is much appreciated.
__________________
|
02-26-2016, 05:44 PM | #789 |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
Best thing to keep your harness intact is to buy a 4 pack gauge jumper harness from SJMAUTOPROD and use that.
It has the wires you need and its plug and play. http://sjmautoprod.com/Harnesses/Das...n-Harness.html |
02-26-2016, 06:59 PM | #790 | |
Drives: 2013 2SS in AGM Join Date: Feb 2016
Location: H-town
Posts: 30
|
Quote:
__________________
|
|
02-26-2016, 09:19 PM | #791 |
Drives: 2013 2SS in AGM Join Date: Feb 2016
Location: H-town
Posts: 30
|
Order placed
__________________
|
04-04-2016, 01:36 PM | #792 |
WxGawd
Drives: 2010 LS Camaro w/RS Victory Red Join Date: Nov 2009
Location: Springfield, VA
Posts: 24
|
My wires all have black cloth wire bundling over them. Can you provide the orientation your first photo is so I can strip the correct bundle? Thanks.
__________________
Call Sign - WxGawd
V6 RS, Airaid CAI & TBS w/Web Sequential Tail Lights |
10-25-2016, 11:42 AM | #793 |
Drives: 2012 Camaro LS - standard Join Date: Jul 2016
Location: Panama City, FL
Posts: 12
|
Okay. I've read through most of this thread. I'm having the hardest time locating the dome light wire so I can connect my door sill lights.
My BCM modules's grey plug does not have the grey wire! But my dome light functions normally. Is there an alternate location the dome might be plugged in to the BCM? |
10-25-2016, 12:07 PM | #794 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
The gray wire for the dome light is just above the gas pedal. Use a T wire splicer to connect the footwell wire to it.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
10-25-2016, 03:52 PM | #795 |
Drives: 2012 Camaro LS - standard Join Date: Jul 2016
Location: Panama City, FL
Posts: 12
|
|
10-25-2016, 04:14 PM | #796 |
Drives: 2010 2SS, 2017 Silverado LTZ Join Date: Jan 2007
Location: Denver,PA
Posts: 3,195
|
No, it's not wrapped. It will be there with other colored wires which are not wrapped. I did mine about 6 years ago. There is a screw on the left side of the console tunnel to ground it. I think you need to take the carpet up to find the screw.
__________________
2010 2SS/RS Victory Red, MN6, 1-7/8 Kooks LT Headers, SLP Axle Back, Edelbrock E-Force S/C, ZL1 Fuel Pump, 72# Injectors, JRE fuel rail upgrade, Roto-Fab CAI, Elite Catch Can, Billet Hurst Shifter, DSS 1000HP axles, Spohn Trailing Arms, Toe Links, Lower Control Arms. Chrome American Racing Torq-Thrust wheels. 546/rwhp & 522/rwtq & 10.9# boost Tune by Jeremy Formato.
|
10-25-2016, 05:49 PM | #797 |
Drives: 2012 Camaro LS - standard Join Date: Jul 2016
Location: Panama City, FL
Posts: 12
|
I've located where to ground it, but I can't find any other non-wrapped wires behind the brake pedal...
|
10-25-2016, 06:32 PM | #798 | |
KNGTFALL
Drives: 2012 2SS 45th edition Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,533
|
Quote:
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Where to wire in ambient footwell lighting? | cybercoaster | Cosmetics and Lighting Modification Discussions | 32 | 01-11-2016 11:08 AM |
Anyone have the Footwell Lighting Kit Installed? | wildthing001967 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 12 | 07-03-2011 05:00 PM |
AACStyle footwell lighting problem | TRSS2 | Camaro DIY & HOW-TO instructions & discussions | 8 | 01-23-2010 06:41 PM |
footwell neon lighting. How to wire to have it come on the other ambient lighting? | Jakefeb3 | Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum | 6 | 11-22-2009 09:32 PM |