04-06-2013, 02:04 PM | #8051 |
Drives: ZL1/TBSS/COPO Join Date: Apr 2012
Location: Colorado
Posts: 410
|
Corners are
Found out at PMP.
__________________
.....2012/14 COPO #33....427, 1.31 60' ....9.39@143......
................ |
04-06-2013, 03:14 PM | #8052 | |
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009
Location: Denver
Posts: 2,126
|
Quote:
BTW, I returned the the Torq 55 gpm SC coolant pump since the bracket alone would not fit without really chopping things up... however Lingenfelter was already working on an upgrade for the CTSV and ZL1 which they benchmarked against Meziere's 20 gpm and 55 gpm pumps. LPE's flows faster, 1/3 the size, and 1/2 the costs! Plus they built in an option into the harness for a Pre-circulation and Post-circulation module that's in the works. Nice easy install.
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . Last edited by Blue70SS; 04-06-2013 at 11:20 PM. |
|
04-06-2013, 03:43 PM | #8053 | |
Drives: ZL1/TBSS/COPO Join Date: Apr 2012
Location: Colorado
Posts: 410
|
Quote:
Keep me updated on that pump. My rear tank chiller was a fail. Looking for a new setup.
__________________
.....2012/14 COPO #33....427, 1.31 60' ....9.39@143......
................ |
|
04-06-2013, 08:43 PM | #8054 |
AquaRob
Drives: ABM RS\SS; 69 427 Camaro; 1970 Z28 Join Date: Mar 2010
Location: Bagram Air Base, Afghanistan
Posts: 648
|
HP numbers
Nothing that can't be derived by punching some numbers into a speed calculator...and it will be above 500.
__________________
Centerline, Weld, Holley, Nick Williams, GMPP, Diamond, ARP, Callies, Nelson Racing, Pro Torque, Strange, J&S Polishing, RMCR, AAC, MBRP, Flowmaster, FAST, Comp Cams, RX Performance, Aeroquip, Spectrum Powder-Coating, Current Performance, RX,TDub Racing, DSS, Fore Innovations, Aeroquip, Earl's, BMR, Ximpac, MPD,Street Scene, Blood, Sweat and Tears
|
04-06-2013, 11:22 PM | #8055 |
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009
Location: Denver
Posts: 2,126
|
So the closest # wins what?
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . |
04-07-2013, 09:42 AM | #8056 |
Drives: ZL1/TBSS/COPO Join Date: Apr 2012
Location: Colorado
Posts: 410
|
A ride in a Blown IOM. You don't get to play, you'll be driving!
__________________
.....2012/14 COPO #33....427, 1.31 60' ....9.39@143......
................ |
04-07-2013, 11:27 AM | #8057 |
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009
Location: Denver
Posts: 2,126
|
Then I get a ride in the COPO !
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . |
04-08-2013, 07:24 PM | #8058 |
Drives: 2011 2SS 6.2L W/RS package Join Date: Jan 2011
Location: Colorado
Posts: 3,008
|
That video gave me the chills...
Very awesome Rat!! Hopefully I will get the chance to see you run it this summer.. Much Thanks!!
__________________
KooKs LT Headers, Borla S-Type cat back, RotoFab CAI, Bo White PTB, RMCR tune... |
04-08-2013, 10:58 PM | #8059 |
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009
Location: Denver
Posts: 2,126
|
What failed..... was the initial AC cool #s not enough to make it through the 1/4 mile, or AC short cycling?
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . |
04-09-2013, 09:47 AM | #8060 | |
Drives: ZL1/TBSS/COPO Join Date: Apr 2012
Location: Colorado
Posts: 410
|
Quote:
The whole idea! I was fighting the rear tank chiller and had to walk away for a bit. There was a second guy working on one at the same time. After shipping the car to the chiller guy, they had to ditch the idea and go to a front mount setup. The IC pump I'm running sounds like a small plane ready for take off and my truck is LOUD!!!!!
__________________
.....2012/14 COPO #33....427, 1.31 60' ....9.39@143......
................ |
|
04-09-2013, 10:43 AM | #8061 | |
AquaRob
Drives: ABM RS\SS; 69 427 Camaro; 1970 Z28 Join Date: Mar 2010
Location: Bagram Air Base, Afghanistan
Posts: 648
|
Quote:
Rob
__________________
Centerline, Weld, Holley, Nick Williams, GMPP, Diamond, ARP, Callies, Nelson Racing, Pro Torque, Strange, J&S Polishing, RMCR, AAC, MBRP, Flowmaster, FAST, Comp Cams, RX Performance, Aeroquip, Spectrum Powder-Coating, Current Performance, RX,TDub Racing, DSS, Fore Innovations, Aeroquip, Earl's, BMR, Ximpac, MPD,Street Scene, Blood, Sweat and Tears
|
|
04-09-2013, 12:22 PM | #8062 | |
Drives: ZL1/TBSS/COPO Join Date: Apr 2012
Location: Colorado
Posts: 410
|
Quote:
Mine was going to be cooled by the AC didnt work... Going to try a duel front mount now!
__________________
.....2012/14 COPO #33....427, 1.31 60' ....9.39@143......
................ |
|
04-09-2013, 03:27 PM | #8063 |
Drives: Supercharged Join Date: Oct 2009
Location: Colorado Springs
Posts: 314
|
Look into the Rule2000 pump. They flow great are only like 1 bill and you run them in the inter cooler tank. Very Quite. All you will here is water moving.
|
04-09-2013, 08:59 PM | #8064 |
Drives: 10 LS3 2SSRS IOM,21 ZLE Wild Cherry Join Date: Aug 2009
Location: Denver
Posts: 2,126
|
Rob, your thinking of the rear mounted transmission cooler that Mike at RMCR installed. Ross was trying to overcome the problem the "Chiller System" has. It cools fantastic (but wears out the AC system prematurely), and the AC turns off at WOT rpm that is changeable in the tune. The problem is, the Intake Air Temp #s at the end of the 1/4 mile are better with a rear mounted ice tank because of the extra capacity to make it through the 1/4. Instead of using ice, Ross would had the chiller Inside the would be "ice tank" - so in theory wouldn't need ice and would have just as good of 1/4 mile cooling capacity. For road use, the chiller beats everything hands down IF working correctly...... buy who is worried about IATs on the road???? I almost did the chiller, but too much drama between who made it and who was selling it...... and seemed plagued with problems except a few people. No one busting down the doors with enthusiasm except one V8 and one V6 guy. One of the 2 had to replace his AC compressor, and I heard of numerous people throwing in the towel or problems being blamed on the installer instead of the product.
__________________
LPE 650+,IOM Pearl White Rallys
860 RWHP 924 RWTQ,TVS2300 10/14 OD 2.75/NW 102mm,RDS/FLOWED "109" SHOT/LPE NCC NLP spoiler/GM splitter/Torq HE-fans/oil coolers/IC1000cc Squash twins,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit LPE Brotherhood . |
Tags |
2012 callaway, 45th anniversary, colorado camaro |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Old school members! | 4thGenRocks | Off-topic Discussions | 14 | 07-06-2010 04:00 PM |
For Sale: 2007 Chev Colorado EXT Cab Z71 4X4 | bluch | Autos For Sale / Wanted | 7 | 06-25-2009 02:03 PM |
Check out this web site i found | ezlock83 | 5th Gen Camaro SS LS LT General Discussions | 5 | 03-04-2009 12:44 PM |
Voice Your Comments/Suggestions/Input for Focus Group on 2010 Camaro | Mr. Wyndham | 5th Gen Camaro SS LS LT General Discussions | 236 | 04-22-2008 12:43 AM |
# Of Members | TAG UR IT | Site Related Announcements / Suggestions / Feedback / Questions | 25 | 03-16-2008 11:47 AM |