V6 Centrifugal Lingenfelter Superchargers - Page 58 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camarowa · 04-05-2010, 12:41 PM

I am still holding out for the LPE kit. Probably wouldn't have send them my car till the fall/winter anyways as I do not want to sacrifice too much of the driving season. But, it would nice to hear something from the LPE camp.

scrming · 04-05-2010, 12:49 PM

Quote:

Originally Posted by StangKiller818

good question what happend???? friends from lpe is keep on telling us that they are hard at work but yet they havent came on the boards to update us or anything. i guess they dont see a market for this kit or else it would of been done by now. all i have to say is thumbs up

to sts for getting the first kit done.

Well.... yes STS has a kit installed on the ACC car.... but until it's publicly available and shipping to private car owners, i'm considering the ACC car more of a pre-production version...

Jeff@Lingenfelter · 04-05-2010, 01:02 PM

Hi Guys,

Sorry for the lack of info as we have been dealing with working out minor calibration quirks with the engine management and the new supercharger package. It is indeed quite different than the V8. If we were to have rushed it to market and called it good, we would probably have a few hundred people mad by now and our name would have been dragged through the mud on a poor system. Nobody wants that. We want to make sure it is dead right before delivering on our promise. We haven't forgotten about you, but myself and others have been overwhelmed with the surge of customer cars currently being built and haven't been as active on the boards. We normally are not the first to market with such a package, but rest assured, it will be RIGHT when delivered.

Thank you again for everyones patience. It will prove to be a home run in the end that is worth the wait!

Jeff

mrray13 · 04-05-2010, 01:06 PM

Awesome! Can't wait to see this hit the streets!

I need to drive up and visit you folks, you're not but a few hours away, lol.

camarowa · 04-05-2010, 01:13 PM

Jeff,

That is great. It was all that I was looking for. Little update goes a long way. Thank you.

You'll see my car as soon as you guys complete the setup.

Quote:

Originally Posted by Jeff@Lingenfelter

Hi Guys,

Sorry for the lack of info as we have been dealing with working out minor calibration quirks with the engine management and the new supercharger package. It is indeed quite different than the V8. If we were to have rushed it to market and called it good, we would probably have a few hundred people mad by now and our name would have been dragged through the mud on a poor system. Nobody wants that. We want to make sure it is dead right before delivering on our promise. We haven't forgotten about you, but myself and others have been overwhelmed with the surge of customer cars currently being built and haven't been as active on the boards. We normally are not the first to market with such a package, but rest assured, it will be RIGHT when delivered.

Thank you again for everyones patience. It will prove to be a home run in the end that is worth the wait!

Jeff

Jeff@Lingenfelter · 04-05-2010, 01:29 PM

No problem guys, I don't like to lose sight of the forums, but it is my fault I did. I will try to keep up!

Anyone is welcome to stop in and I'll be glad to show you the shop and show you we haven't been dragging our feet on the V6!

BlessedChef10 · 04-05-2010, 01:39 PM

Whenever youre ready Im interested

mrray13 · 04-05-2010, 01:47 PM

Quote:

Originally Posted by Jeff@Lingenfelter

No problem guys, I don't like to lose sight of the forums, but it is my fault I did. I will try to keep up!

Anyone is welcome to stop in and I'll be glad to show you the shop and show you we haven't been dragging our feet on the V6!

I might take you up on that, lol. That would be sweet! So, what are your plans Wednesday, lol?

Jeff@Lingenfelter · 04-05-2010, 01:51 PM

Quote:

Originally Posted by mrray13

I might take you up on that, lol. That would be sweet! So, what are your plans Wednesday, lol?

Just let me know when! I have an appointment I have to keep around 11:30, but that should work out anytime after that.

ROD1 · 04-05-2010, 08:13 PM

Im pumped!

xtreme industries · 04-06-2010, 09:07 AM

do you have any authorized installation centers for such a kit in Calgary Alberta Canada, you are just too far to go visit.

Jeff@Lingenfelter · 04-06-2010, 11:13 AM

Quote:

Originally Posted by xtreme industries

do you have any authorized installation centers for such a kit in Calgary Alberta Canada, you are just too far to go visit.

Davenport Motorsports is who we would recommend. We don't have any authorized installers, or authorized installation centers outside of the Lingenfelter facility in Decatur Indiana, but we do work with many resellers and installers on our products. Davenport Motorsports is great to work with and we do recommend them.

Blue70SS · 04-09-2010, 12:39 AM

Quote:

Originally Posted by ROD1

Im pumped!

Quote:

Originally Posted by BlessedChef10

Whenever youre ready Im interested

Quote:

Originally Posted by mrray13

Awesome! Can't wait to see this hit the streets!

I need to drive up and visit you folks, you're not but a few hours away, lol.

You guys will love facility tour..... great equipment, talented team. Check out LPE and you'll be hooked!

FYI: They were working real hard on that RJT V6 when I was there!

Cro · 04-09-2010, 07:55 AM

Didn't realize you guys were only 4 1/2 hours away from me, i'll have to keep that in mind!

04-05-2010, 12:41 PM	#799
camarowa Drives: 2013 SVT Raptor, sold 2010 Camaro Join Date: Jul 2009 Location: PNW....almost canada Posts: 1,907	I am still holding out for the LPE kit. Probably wouldn't have send them my car till the fall/winter anyways as I do not want to sacrifice too much of the driving season. But, it would nice to hear something from the LPE camp. __________________ - Pfadt Suspension Package; Springs & Sways - Brembo Brake Upgrade (Yellow); Courtesy Fesler Built - Custom Magnaflow Exhaust - Blacked-Out Bowties & RS Emblems, Front bowtie delete - Full Dynamat Extreme Trunk Coverage - Tinted side markers - Interior DSV Customs Leather Upgrades - Airaid CAI V2 - Forgestar F14 Gunmetal 20x9, 20x11 - Doug Thorley Shorties Last edited by camarowa; 04-05-2010 at 01:10 PM.

04-05-2010, 01:06 PM	#802
mrray13 Drives: 2010 1LT RS Rally Yellow Join Date: Oct 2009 Location: southern Illinois Posts: 2,973	Awesome! Can't wait to see this hit the streets! I need to drive up and visit you folks, you're not but a few hours away, lol. __________________ *PacMan*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Supercharger / Turbocharger Results (INFO) Thread	radz28	Forced Induction - V8	273	08-15-2023 04:44 PM
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	387	09-19-2019 06:53 PM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp!	Sizzox	5th Gen Camaro SS LS LT General Discussions	108	04-14-2010 07:09 PM
V6 Camaro Owners! 2010 V6 Zex Nitrous System now available!	Kris@BMCPerformance	Forced Induction	3	01-23-2010 02:41 PM
Lingenfelter Supercharged Camaro makes 600 RWHP!!	Kevin@Lingenfelter	Forced Induction - V8	218	06-24-2009 02:26 PM

04-05-2010, 01:02 PM	#801
Jeff@Lingenfelter Drives: 1966 Chevy II/1968 Camaro Join Date: Aug 2009 Location: Decatur Posts: 128 View My Garage	Hi Guys, Sorry for the lack of info as we have been dealing with working out minor calibration quirks with the engine management and the new supercharger package. It is indeed quite different than the V8. If we were to have rushed it to market and called it good, we would probably have a few hundred people mad by now and our name would have been dragged through the mud on a poor system. Nobody wants that. We want to make sure it is dead right before delivering on our promise. We haven't forgotten about you, but myself and others have been overwhelmed with the surge of customer cars currently being built and haven't been as active on the boards. We normally are not the first to market with such a package, but rest assured, it will be RIGHT when delivered. Thank you again for everyones patience. It will prove to be a home run in the end that is worth the wait! Jeff

04-05-2010, 01:29 PM	#804
Jeff@Lingenfelter Drives: 1966 Chevy II/1968 Camaro Join Date: Aug 2009 Location: Decatur Posts: 128 View My Garage	No problem guys, I don't like to lose sight of the forums, but it is my fault I did. I will try to keep up! Anyone is welcome to stop in and I'll be glad to show you the shop and show you we haven't been dragging our feet on the V6!

04-05-2010, 01:39 PM	#805
BlessedChef10 BLESSEDCHEF10 Drives: 2010 2lt camaro rs Join Date: Feb 2010 Location: west hills,ca Posts: 696 View My Garage	Whenever youre ready Im interested

04-05-2010, 08:13 PM	#808
ROD1 Retired Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09 Join Date: Aug 2009 Location: Ithaca NY Posts: 2,563	Im pumped!

04-06-2010, 09:07 AM	#809
xtreme industries Drives: 2010 Camaro 2lt RS Join Date: Sep 2009 Location: Calgary, AB, Canada Posts: 548	do you have any authorized installation centers for such a kit in Calgary Alberta Canada, you are just too far to go visit.

04-09-2010, 07:55 AM	#812
Cro Drives: Raincheck on that one Join Date: Mar 2010 Location: Princeton, IN Posts: 141	Didn't realize you guys were only 4 1/2 hours away from me, i'll have to keep that in mind!