650 rwhp which clutch - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

H-E · 03-12-2015, 04:15 PM

Quote:

Originally Posted by MpCamaro

Might be worth looking into, ill be honest though I have never used Fidanza personally though. Im also looking into them now for a Flywheel.

Someone may have bought them but they have been out of business for a few years.I helped them developed their last twin but we had a difference of opion on which direction we needed to go in so I started Street Slayer....

Steve@SNL/Monster Clutch · 03-12-2015, 04:20 PM

Quote:

Originally Posted by H-E

Someone may have bought them but they have been out of business for a few years.I helped them developed their last twin but we had a difference of opion on which direction we needed to go in so I started Street Slayer....

Fidanza never went out of business FWIW, they've been catering to the aluminum flywheel market for GM for a long time now.

blufin · 03-12-2015, 08:09 PM

I've been very happy with my twin carbon 'Slayer. Holds great and drives like stock.

Nighthawk89 · 03-13-2015, 01:45 AM

Im leaning towards another DYAD in my build. Time will tell here in the next month though..

Green Machine · 03-13-2015, 01:54 AM

I chose to give monster a try. I'm pretty excited to finally make a decision and I can't wait till I finish my car!

Tuner is building a base tune for it now and I'm hoping it'll be ready to roll by end of this month

.

H-E · 03-13-2015, 06:54 AM

Quote:

Originally Posted by blufin

I've been very happy with my twin carbon 'Slayer. Holds great and drives like stock.

Glad to hear,when the time finally comes we can rebuild it as good as new for a fraction of the cost.

H-E · 03-13-2015, 06:57 AM

Quote:

Originally Posted by Nighthawk89

Im leaning towards another DYAD in my build. Time will tell here in the next month though..

Anything we can do to put you on the Street Slayer team you let me know,keep in mind we give discounts on your drive train needs when your on the Street Slayer team!

Robbs1le · 03-14-2015, 12:44 AM

Well after posting to centerforce to try to get someone to call me I went with the street slayer. Thomas answered both of my phone calls even though he was on vacation. He answered all of my questions thoroughly. The guy that answered the phone at centerforce told me they don't make a clutch for the 2014 haha I don't like calling someone in going to spend 2 grand with and them not knowing more about there product than me. I asked what made his clutches good and he didn't have an answer for me... So I had to move on to the street slayer! I'm so glad I made the decision to spend the extra money and do it right! It'll be here Tuesday! Thank you guys for the help!

z3R0fo01 · 03-14-2015, 01:15 AM

Quote:

Originally Posted by Robbs1le

Well after posting to centerforce to try to get someone to call me I went with the street slayer. Thomas answered both of my phone calls even though he was on vacation. He answered all of my questions thoroughly. The guy that answered the phone at centerforce told me they don't make a clutch for the 2014 haha I don't like calling someone in going to spend 2 grand with and them not knowing more about there product than me. I asked what made his clutches good and he didn't have an answer for me... So I had to move on to the street slayer! I'm so glad I made the decision to spend the extra money and do it right! It'll be here Tuesday! Thank you guys for the help!

Nighthawk89 · 03-14-2015, 01:18 AM

Quote:

Originally Posted by Nighthawk89

Im leaning towards another DYAD in my build. Time will tell here in the next month though..

I retract this notion.. Im leaning towards Mantic 9000 After reaching out to Centerforce as well.

Nighthawk89 · 03-14-2015, 01:19 AM

Quote:

Originally Posted by H-E

Anything we can do to put you on the Street Slayer team you let me know,keep in mind we give discounts on your drive train needs when your on the Street Slayer team!

I wish i had the $ to even consider this.. Gotta stay realistic tho! I'm hoping to be out 2k with install. And the slayer id want isn't in that price point. Great product from what I've read though thats forsure!

H-E · 03-14-2015, 07:32 AM

Quote:

Originally Posted by Nighthawk89

I wish i had the $ to even consider this.. Gotta stay realistic tho! I'm hoping to be out 2k with install. And the slayer id want isn't in that price point. Great product from what I've read though thats forsure!

remember its not what you spend its what you save.Give me a call and let me see what I can do for you.

H-E · 03-14-2015, 07:33 AM

Quote:

Originally Posted by Robbs1le

Well after posting to centerforce to try to get someone to call me I went with the street slayer. Thomas answered both of my phone calls even though he was on vacation. He answered all of my questions thoroughly. The guy that answered the phone at centerforce told me they don't make a clutch for the 2014 haha I don't like calling someone in going to spend 2 grand with and them not knowing more about there product than me. I asked what made his clutches good and he didn't have an answer for me... So I had to move on to the street slayer! I'm so glad I made the decision to spend the extra money and do it right! It'll be here Tuesday! Thank you guys for the help!

Thanks ,I know your going to love it!

Robbs1le · 03-14-2015, 08:46 AM

Quote:

Originally Posted by Nighthawk89

I wish i had the $ to even consider this.. Gotta stay realistic tho! I'm hoping to be out 2k with install. And the slayer id want isn't in that price point. Great product from what I've read though thats forsure!

Give Thomas a call! I know it's more and I was on a 1k dollar budget but after reading for 8hrs straight I realized if I was going to keep my car for 3 years this was worth splurging on.

03-12-2015, 08:09 PM	#73
blufin Drives: Fire Engine Join Date: Oct 2008 Location: WPB, Florida Posts: 1,415	I've been very happy with my twin carbon 'Slayer. Holds great and drives like stock. __________________ 12.618 @ 110.75 Bone Stock 1/4 mile 8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold

03-13-2015, 01:54 AM	#75
Green Machine Always Workin Drives: 2021 Mazda MX-5 Join Date: Aug 2013 Location: Youngstown, OH Posts: 1,362	I chose to give monster a try. I'm pretty excited to finally make a decision and I can't wait till I finish my car! Tuner is building a base tune for it now and I'm hoping it'll be ready to roll by end of this month . __________________ 2023 Vivid Orange 1SS 1LE 6MT Arrived 8/31 Purchased 9/3 2018 1SS 1LE, HyperBlue Metallic (Sold) 2014 1SS 1LE, Black, Twin Turbo (Sold)

03-13-2015, 01:45 AM	#74
Nighthawk89 Drives: 2011 Camaro 2Ss M6 Join Date: Dec 2011 Location: Southern California Posts: 4,013	Im leaning towards another DYAD in my build. Time will tell here in the next month though..

03-14-2015, 12:44 AM	#78
Robbs1le Drives: 2017 zl1. Headers intake pulley e Join Date: Oct 2014 Location: Okc Posts: 174 View My Garage	Well after posting to centerforce to try to get someone to call me I went with the street slayer. Thomas answered both of my phone calls even though he was on vacation. He answered all of my questions thoroughly. The guy that answered the phone at centerforce told me they don't make a clutch for the 2014 haha I don't like calling someone in going to spend 2 grand with and them not knowing more about there product than me. I asked what made his clutches good and he didn't have an answer for me... So I had to move on to the street slayer! I'm so glad I made the decision to spend the extra money and do it right! It'll be here Tuesday! Thank you guys for the help!