08-17-2015, 09:22 AM | #71 |
Anybody still have the template? Not trying to pay 15 dollars for it. Let me know if you'd be willing to mail it to me and I will mail it back if you'd like.
|
|
08-07-2016, 10:49 AM | #72 |
Drives: 2SS,CAI,Exhaust,Tune Join Date: Feb 2016
Location: MissionTX
Posts: 2
|
Where can i buy a zl1 diffuser
|
08-07-2016, 02:21 PM | #73 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
|
I have one but no tabs.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
09-29-2016, 01:06 AM | #74 |
2015 Camaro 1SS A6
Drives: 2015 Camaro 1SS Join Date: Jun 2016
Location: Chalmette LA, 70043
Posts: 7
|
Will this work on a 2015 camaro ss?
|
09-29-2016, 09:20 AM | #75 |
Drives: 2010 RJT 2SS M6 Camaro Join Date: Feb 2011
Location: Garrison,KY
Posts: 1,548
|
No, these parts only fit the 2010-13 rear bumper cover. But, I'm sure the same mod can be done on a 2014-15, just not with these parts.
__________________
2010 RJT 2SS M6, Kooks Long Tubes, NPP Exhaust, CAI Cold Air w/Jannetty Scoop, RotoFab Washer Bottle, Elite Engineering Catch Can, MGW Shifter w/ZL1 Shaft and Knob, 2015 SS Sedan Steering Wheel and Air Bag, 2012 Heater Hose Conversion, 2012 Power Seat Conversion, RS Head Lights,Gen5DIY RS Conversion Harness, LED Fog Lamp Bulbs, Backup Camera Kit, NLP Spoiler, SLP Splitter, ZL1 Rockers and Diffuser, Color Matched Shark Fin, RS Roof Mouldings, Painted White Stripes, WCC LS3 Emblems, Heritage Grille and Blacked Out Tail Light Panel w/Retro SS Emblems, 416 RWHP, 411 RWT, Tuned by BlueCat.
|
12-08-2016, 12:48 PM | #76 |
Drives: 2010 Camaro LS Join Date: Sep 2016
Location: California
Posts: 75
|
Is this difuser different from the #22815277
|
02-03-2017, 01:25 PM | #77 |
|
Bump this up! Hoping to tackle this sometime this winter before car show season starts here in Seattle.
Seems best route is to go through Gen5DIY. My question is, why does the price jump so drastically from $215 to $500 adding the heat shield on their site? That is before even buying the diffuser somewhere. What am I missing. 2010 2SS here - already have the NPP "diffuser", but it catches so much air in it, it's starting to bow in the middle..
__________________
Cold Air Inductions CAI Stainless Power LT's with HFC's Flowmaster American Thunder Cat Back APEX Scoop and WW Relocation Kit VMAX Ported Throttle Body Custom Dyno Tune Pfadt 1.25" Lowering Springs ZL1 Rims on 275 front 315 Rear custome underlay vinyl wrap Anvil Spoiler heritage grill APR Front Splitter Custom Emblempros emblems ZL1 Side Skirts 416.5 whp 410 torque (CURRENTLY) Up Next: BTR Stage 3 Cam and supporting mods (in garage now)
|
02-06-2017, 01:21 PM | #78 | |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
|
Heat Shields
Quote:
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
04-20-2018, 08:54 AM | #79 |
Drives: 2013 Camaro SS Turbo Join Date: Apr 2014
Location: South Florida
Posts: 1,525
|
Anybody looking to order the zl1 rear diffuser this was by far the cheapest because shipping was less than $20 for me (compared to $100+ everywhere else) just got mine delivered and its good to go
https://www.gmpartsnow.com/oem-parts...cover-22894221
__________________
|
04-24-2018, 10:21 AM | #80 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,076
|
Does anyone have the pix of install???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-05-2019, 10:58 PM | #81 |
Drives: 2010 camaro ss/rs Join Date: Aug 2018
Location: missouri city
Posts: 10
|
where can i find/buy the template
|
03-06-2019, 04:59 AM | #82 |
Hotwheels
|
__________________
|
|
|
|
|