HURST Auto Comp Stick GROUP BUY! - Page 6 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

rontammy0 · 03-16-2017, 09:55 PM

Quote:

Originally Posted by ZL1Dan

Thanks for your concern. It's all relative to how you want to spend your modding dollars.

Well they were over $ 600 before discounts when they were being produced.....for a small run of 50 im wondering if it will go up or stay at that price.

Z/28Dan · 03-16-2017, 10:59 PM

Quote:

Originally Posted by rontammy0

Well they were over $ 600 before discounts when they were being produced.....for a small run of 50 im wondering if it will go up or stay at that price.

Have you read this entire thread? The pricing was already put out there by Hurst. CHECK POST #37!

Are you talking in Canadian dollars or US?

rontammy0 · 03-16-2017, 11:24 PM

Quote:

Originally Posted by ZL1Dan

Have you read this entire thread? The pricing was already put out there by Hurst. CHECK POST #37!

Are you talking in Canadian dollars or US?

No i havnt read the entire thread.....What post is the 350 up to 500 dollar quote again. Most everything I buy for my car comes from the US so price fluctuates. Just seeing if the prices where the same as before......I already have one so im just curious. Good to see interest in this shifter its really nice. And I didnt have to post in bold.

JB12ZL1 · 03-16-2017, 11:40 PM

I'm in at $350

68rs.ss396 · 03-17-2017, 05:57 AM

I been looking for a left over for a good while now so lm in

13hotwheels · 03-17-2017, 06:08 AM

Quote:

Originally Posted by ZL1Dan

Have you read this entire thread? The pricing was already put out there by Hurst. CHECK POST #37!

Are you talking in Canadian dollars or US?

I may have missed the info, but suggest to preorder direct thru Hurst or ? BTW, thanks for taking the initiative to open the door!

Trickskier · 03-17-2017, 06:56 AM

Quote:

Originally Posted by ZL1Dan

Have you read this entire thread? The pricing was already put out there by Hurst. CHECK POST #37!

Are you talking in Canadian dollars or US?

What's the latest count and when will Hurst make a decision?

Kole · 03-17-2017, 08:11 AM

Dan do we have to call hurst and pre order or wait for the word from you that they'll do it for us..

Z/28Dan · 03-17-2017, 09:43 AM

Up to 57!

HurstPerformance is a Camaro5 Forum sponsor and you can message them here:

http://www.camaro5.com/forums/member.php?u=93425

Over the past several months, we have exchanged private messages and they are monitoring this thread as well. Hopefully soon, the decision makers will chime in and give us pre-ordering instructions.

Again, I am not an official spokesman for Hurst. I have been wanting this shifter for a long time and there are NONE to be found anywhere. I know these will sell if made and Hurst knows they laid off production long enough to make it a very desirable item.

This is where it starts. The Camaro5 community asking for a part to be made available to enthusiasts like us. It may take a little while to get these into our Camaros, but it's coming...

4T5 Heartbeat · 03-17-2017, 04:00 PM

I have been looking for one of these shifters for a long time, I hope this works out. I am in.

InFiD3ViL · 03-17-2017, 05:42 PM

I am IN!

Been wanting this for a loooooong time. Ok, 8 months, but still!

txthunder · 03-17-2017, 07:31 PM

INterested.

se7en · 03-17-2017, 11:03 PM

I posted a used one on the interior makert-place on here.

beak81champ · 03-17-2017, 11:21 PM

Interested

03-17-2017, 05:57 AM	#75
68rs.ss396 Drives: 2010 2ss 1956 Chevy 210 post Join Date: Jul 2016 Location: Essex md Posts: 14 View My Garage	I been looking for a left over for a good while now so lm in __________________ 2010 2ss/rs Cai,Slp loud mouth 2 axel back X pipe throttle controler upr catch can programer 373: rear gears Slp under drive harmonic balancer. Jba cat 4ward headers nitto g2 on each corner Lakewood frame connectors

03-17-2017, 09:43 AM	#79
Z/28Dan Drives: 2023 1SS 1LE Vivid Orange Join Date: Mar 2011 Location: Fredericksburg, VA Posts: 2,680 View My Garage	*Up to 57!* HurstPerformance is a Camaro5 Forum sponsor and you can message them here: http://www.camaro5.com/forums/member.php?u=93425 Over the past several months, we have exchanged private messages and they are monitoring this thread as well. Hopefully soon, the decision makers will chime in and give us pre-ordering instructions. Again, I am not an official spokesman for Hurst. I have been wanting this shifter for a long time and there are NONE to be found anywhere. I know these will sell if made and Hurst knows they laid off production long enough to make it a very desirable item. This is where it starts. The Camaro5 community asking for a part to be made available to enthusiasts like us. It may take a little while to get these into our Camaros, but it's coming... __________________ There are only so many days in your lifetime. So get out and drive your Camaro... Dan

03-17-2017, 05:42 PM	#81
InFiD3ViL Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016 Location: Spring Hill, FL Posts: 4,737	I am IN! Been wanting this for a loooooong time. Ok, 8 months, but still! __________________ 2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI

03-17-2017, 11:21 PM	#84
beak81champ ILSQ Drives: '13 2SS/RS Join Date: Feb 2017 Location: Flatlands Posts: 322	Interested __________________ Way too many mods to list, and just getting started...

03-16-2017, 11:40 PM	#74
JB12ZL1 Drives: victory red Camaro ZL1 Join Date: May 2013 Location: Lynnfield Ma Posts: 492 View My Garage	I'm in at $350

03-17-2017, 08:11 AM	#78
Kole Drives: 2011 5th gen Join Date: Mar 2017 Location: Michigan Posts: 2	Dan do we have to call hurst and pre order or wait for the word from you that they'll do it for us..

03-17-2017, 04:00 PM	#80
4T5 Heartbeat Drives: 2012 SS Camaro 45th Aniversary Join Date: Mar 2017 Location: Cheyenne, Wy Posts: 2	I have been looking for one of these shifters for a long time, I hope this works out. I am in.

03-17-2017, 07:31 PM	#82
txthunder Drives: 2014 Camaro SS White with Beige Top Join Date: Apr 2014 Location: Converse, Texas Posts: 95 View My Garage	INterested.

03-17-2017, 11:03 PM	#83
se7en Drives: 10 Procharged SS Join Date: Oct 2009 Location: The creek at the end of the dead end road Posts: 1,857	I posted a used one on the interior makert-place on here.