Atlanta Club Lounge - Page 617 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

csjcsj · 08-08-2012, 12:11 PM

Oh, when you take the TPMS's off of the wheel make sure you mark them, lf,rf, lr, rr! That way you don't have to go through the learning process!!!

Dr Jkel · 08-08-2012, 12:15 PM

Quote:

Originally Posted by CamaroKid300

Alright, I ended up getting a quote. Mike was really backed up so he referred me to another guy.

Question #2....do any of you have (for some odd reason) have a set of rims and tires laying around I could throw on my car for a day or two while I have this done? If not its not a big deal!

PS- Well now I found out I'm gonna be looking at $100 more to get my tires unmounted, remounted, and balanced along with new valve stems or something (new seals for the TPMS?)

I really didn't think about how much that was going to cost. I got quoted $45/wheel but he said that might go up a little bit depending on if sandblasting takes longer than what he plans. Max anyone has ever paid was $65 a rim.

Erg so I'm looking at roughly $300 to get this done....but its so close to the time I need to go back to school i'm not sure if I want to risk it.

Just think you could have had a set if SAVINI'S

hightower · 08-08-2012, 12:15 PM

Quote:

Originally Posted by csjcsj

Oh, when you take the TPMS's off of the wheel make sure you mark them, lf,rf, lr, rr! That way you don't have to go through the learning process!!!

Good point, I remember people asking about how to reset TPMS sensors. It can be done but IIRC it's not easy to learn how to neither do so.

Dr Jkel · 08-08-2012, 12:16 PM

Oh it is easy to learn them.......real simple!

Dr Jkel · 08-08-2012, 12:16 PM

I am glad all my ATL friends got home safe and sound from the Fest...Hopefully with no tickets!

Dr Jkel · 08-08-2012, 12:17 PM

Simply hit the learn on the DIC then let air out of each tire till the horn beeps...SIMPLE!

hightower · 08-08-2012, 12:44 PM

Quote:

Originally Posted by Dr Jkel

Simply hit the learn on the DIC then let air out of each tire till the horn beeps...SIMPLE!

Oh wow I thought it was more complicate than that! Well I guess it's just knowing the tricks of the trade then!

Dr Jkel · 08-08-2012, 12:49 PM

Trust me I had to keep doing it when my wheels leaked air on the way to the fest

But after they were fixed it made getting there much easier!

CamaroKid300 · 08-08-2012, 01:40 PM

Quote:

Originally Posted by driser

The price sounds reasonable to me, if it is done right. Where did Mike send you?

http://businessprofiles.com/details/...llc/GA-0450074

Seems like a legit company. Good price, talked about doing a good job sandblasting...seems legit.

csjcsj · 08-08-2012, 04:14 PM

Quote:

Originally Posted by Dr Jkel

Simply hit the learn on the DIC then let air out of each tire till the horn beeps...SIMPLE!

But if you want to do that you have to do it in a certain order! I believe it's drivers side front, drivers side rear, pass front, pass rear! It's in the manual!!!!

Dexcam1 · 08-08-2012, 04:43 PM

Quote:

Originally Posted by Dr Jkel

Simply hit the learn on the DIC then let air out of each tire till the horn beeps...SIMPLE!

Quote:

Originally Posted by csjcsj

But if you want to do that you have to do it in a certain order! I believe it's drivers side front, drivers side rear, pass front, pass rear! It's in the manual!!!!

I did this day before leaving for C5FIII. It's drivers front, pass front, pass rear then drivers rear(clockwise).

csjcsj · 08-08-2012, 04:53 PM

Dex, I knew it was some sort of way, just couldn't remember!!! Thanks for clearing it up!!!

musclecargirl · 08-08-2012, 08:18 PM

Quote:

Originally Posted by CamaroKid300

Alright, I ended up getting a quote. Mike was really backed up so he referred me to another guy.

Question #2....do any of you have (for some odd reason) have a set of rims and tires laying around I could throw on my car for a day or two while I have this done? If not its not a big deal!

PS- Well now I found out I'm gonna be looking at $100 more to get my tires unmounted, remounted, and balanced along with new valve stems or something (new seals for the TPMS?)

I really didn't think about how much that was going to cost. I got quoted $45/wheel but he said that might go up a little bit depending on if sandblasting takes longer than what he plans. Max anyone has ever paid was $65 a rim.

Erg so I'm looking at roughly $300 to get this done....but its so close to the time I need to go back to school i'm not sure if I want to risk it.

I have a set of factory rear wheels with factory tires on them and two factory front wheels w/out tires. You are welcome to use them.

ken53007 · 08-08-2012, 08:55 PM

I have 2 front rims with tires if wanna use them to but you will have to meet me half way to get them

08-08-2012, 12:11 PM	#8625
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	Oh, when you take the TPMS's off of the wheel make sure you mark them, lf,rf, lr, rr! That way you don't have to go through the learning process!!! __________________

08-08-2012, 12:16 PM	#8628
Dr Jkel Roll Tide Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Talladega, Alabama Posts: 4,378	Oh it is easy to learn them.......real simple! __________________ MUSTANG...Like Bringing a Hot Dog to a Steak Dinner....There is no comparison.

08-08-2012, 12:16 PM	#8629
Dr Jkel Roll Tide Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Talladega, Alabama Posts: 4,378	I am glad all my ATL friends got home safe and sound from the Fest...Hopefully with no tickets! __________________ MUSTANG...Like Bringing a Hot Dog to a Steak Dinner....There is no comparison.

08-08-2012, 12:17 PM	#8630
Dr Jkel Roll Tide Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Talladega, Alabama Posts: 4,378	Simply hit the learn on the DIC then let air out of each tire till the horn beeps...SIMPLE! __________________ MUSTANG...Like Bringing a Hot Dog to a Steak Dinner....There is no comparison.

08-08-2012, 12:49 PM	#8632
Dr Jkel Roll Tide Drives: 2010 2SS RJT/BLK 6Spd Man Join Date: May 2009 Location: Talladega, Alabama Posts: 4,378	Trust me I had to keep doing it when my wheels leaked air on the way to the fest But after they were fixed it made getting there much easier! __________________ MUSTANG...Like Bringing a Hot Dog to a Steak Dinner....There is no comparison.

08-08-2012, 04:53 PM	#8636
csjcsj Drives: 2010 Camaro SS/RS 6spd Join Date: Sep 2009 Location: Jefferson, Ga Posts: 4,399 View My Garage	Dex, I knew it was some sort of way, just couldn't remember!!! Thanks for clearing it up!!! __________________

08-08-2012, 08:55 PM	#8638
ken53007 Drives: 2010 camaro ss Join Date: Dec 2010 Location: acworth ga Posts: 1,721	I have 2 front rims with tires if wanna use them to but you will have to meet me half way to get them

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does Anyone Use a Club?	PercyJWellingtonIII	5th Gen Camaro SS LS LT General Discussions	51	12-31-2011 08:05 AM
CAJUN CAMARO CLUB/ Meeting to formalize our club	GATORJAK	USA - Southcentral	124	03-20-2011 08:22 PM
In the process of starting a new Camaro Club this year!	Blue Maro Demon	USA - Southeast	0	01-23-2011 11:51 PM
Eastern TN 5th GEN Camaro Club	304hp?	USA - Southeast	0	02-04-2010 03:11 AM
Club Day at Speedworld in January on a Sunday	chellzers	USA - Southwest	0	01-03-2010 04:39 PM