![]() |
|
|
#869 |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 701 RWHP Lingenfelter/Pedders Beast Join Date: Apr 2009
Location: El Paso
Posts: 2,973
|
Golden Bandit to to be exact.
I would expect no less from Junkie.
__________________
Lingenfelter forged balanced and blueprinted LS3, Maggie TVS 2300 LPE 9.5" Rearend 3.73,LPE dual disk clutch,10/14 rib belt drive,
MTI shifter,RPM Level VI,Corsa stainless cat back, Racing Brake Rotors, LPE calipers, LPE twin fuel pumps, American Racing long tube headers, GT9 cam Port and polished heads and an ADM majic tune. 701 RWHP,Fully Pedderized w/complete bushings and Sportsryder Supercar Remote resevior coilovers. CCW 505t's Nitto Invo's and DR's Beware of the LPE Brotherhood! |
|
|
|
|
|
#870 |
![]() Drives: 2SS/RS RJT, 2002 WS6 Tran-am Join Date: Oct 2009
Location: KC,KS
Posts: 36
|
Hello LPE guys. I have a few questions and believe you guys can probably answer them. So first off my could should be arriving mid December last I heard from my dealer and have been considering having it shipped to LPE. First off what is the difference from the base install and the 570 package to justify the extra two grand? It says fuel system upgrade and cold air. Is that all? And I read somewhere that one of you had your car sent to the dealer like two miles from there, what was the dealer and how would I go about setting that up? Thanks.
|
|
|
|
|
|
#871 | |
![]() ![]() ![]() Drives: Not enough room here! Join Date: Jul 2009
Location: Plainfield, IL
Posts: 1,016
|
Quote:
The upgrade 570 package includes the full Lingenfelter 3 year 36K warranty. This is a huge piece of mind for little coin. I spent a lot of time researching where to send my modern muscle car, you won't be sorry going to Lingy. I can highly recommend the 650 package!
__________________
BEWARE OF THE LPE BROTHERHOOD!
Remember: You can sleep in your car, but you can't drive your house! |
|
|
|
|
|
|
#872 |
![]() Drives: 2SS/RS RJT, 2002 WS6 Tran-am Join Date: Oct 2009
Location: KC,KS
Posts: 36
|
I have no doubt the 650 package is the way to go except one problem. I'm 22 years old and I'm getting together everything I have just to be able the pay for for the 570 right now. But the extra for the warranty on the 570 package seems like it would deff be worth it. Is it an entire power train warranty or what all does it cover? I have researched a lot of shops too and decdided the quality of LPE will definitely be worth it.
|
|
|
|
|
|
#873 |
![]() ![]() ![]() Drives: Not enough room here! Join Date: Jul 2009
Location: Plainfield, IL
Posts: 1,016
|
I would verify exact coverage with them. Shoot them an email and they can fill in the blanks. There are plenty of us here who can attest to the quality of the work! Good luck and just ask if you need anything else!
__________________
BEWARE OF THE LPE BROTHERHOOD!
Remember: You can sleep in your car, but you can't drive your house! |
|
|
|
|
|
#874 |
![]() Drives: 2SS/RS RJT, 2002 WS6 Tran-am Join Date: Oct 2009
Location: KC,KS
Posts: 36
|
Will do and thanks for the help!
|
|
|
|
|
|
#875 |
|
FORSALE 800hp LPE Camaro
|
LPE 550 package
Speed I finally got around to posting the Dyno results. I tried changing the view, but I wasn't successful. Hopefully you have a laptop and can turn it on it's side.
|
|
|
|
|
|
#876 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
Quote:
We had our cars drop shipped to courtesy Chevrolet, Decatur Indiana. They are 2 miles from LPE. Your dealer can arrange this for you. This saves shipping for one direction. You want to get this set up early with your dealer to get the car routed there - do it now if you are serious. There is a point in the process you will not be able to change location of the delivery. You need to give LPE 1/2 down for deposit. This gets you in the Queue and will get your car be scheduled to worked on when it arrives. Both Speed and I did this pretty early. I didn't have to wait when my car arrived at LPE. They are getting pretty backed up with all the cars they have to work on.. The 570 kit has a lot of little things that improve on the base kit. The LPE modded cold air intake, fuel injectors, KB boost a pump, dyno tune, and warranty are the additions above base as far as I can tell. Both Speed and I added the Borla exhaust while it was there. If you are adding an aftermarket exhaust, you want it put on at LPE, as it will get included in the TUNE. I also added the MTI shifter, and ADM boost guage. If you look at mine and Speed's signatures, you will see that the dyno #'s are pretty impressive for the kit. both cars came in within 10 lbs of each other - mine was 526 RWHP 491 RWTRQ. Check speed's sig for his #'s. It is worth the 2K extra if you ask either of us. Everyone here in this thread also added the coil covers - they really dresses up under the hood, and they are a peice of art. LPE does awesome work! Recommended by everyone here... no one will complain about the quality of the work. They are not cheap, though. You get what you pay for. One side note - The LPE team will put some miles on your car - Mine had 177 Miles on it when I picked it up. This is actually a good thing as they check it out and ensure that everything is operating properly, no engine knocking, fuel curves are set appropriately, timing advance is correct, etc. Read my member Journal "chronicle of the red devil - a lingenfeltered and pedderized camaro". It has a lot of detail on my experience with LPE. Speed's build is detailed in "My lingenfelter camaro build". It is worth every penny spent. LPE has 31+ years tuning GM engines and making HP. I would do this again, and wouldn't change anything (other than adding more HP). -570 |
|
|
|
|
|
|
#877 | |
![]() ![]() ![]() ![]() ![]() Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
Quote:
Here is some information on Courtesy Motors in Decatur, IN. Call Tom Rash at Courtesy Motors in Decatur, IN. His number is 260-724-8525 Ext: 212 or 800-859-5227 Ext: 212 All you have to do to get the drop ship done is to change the BAC Code from your ordering dealer to the Courtesy Motor dealership. I have the code handy but I am sure Tom can help you with this. I hope you get everything sorted out and I look forward to another brother in the hood....or is it the brotherhood
__________________
'10 CTS-V : LPE 650+ Package 587hp / 582tq
2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI |
|
|
|
|
|
|
#878 |
![]() ![]() Drives: 2016 Corvette Z06 Blade Silver Join Date: Jun 2009
Location: Florida
Posts: 822
|
For those that have bought the LPE 570 package. What does the 3yr warranty cover? Is it the full driveline or just the motor? Also for warranty work were does the car have to go? Back to LPE or can a dealer do the work?
__________________
2016 2LZ Z06 Blade Silver
2013 ZL1 BLACK on BLACK <SOLD> Roto-Fab CAI 2010 2SS/RS BLACK on BLACK <SOLD> 3" MBRP 304 Stainless Exhaust Roto-Fab CAI |
|
|
|
|
|
#879 | |
![]() ![]() ![]() ![]() ![]() Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
Quote:
To everyone who doesn't know D R. He helped me out when I picked up my car from LPE. Picked us up from the airport, went on the tour with us and hung out until my car was done that day. He is a great guy!! Congrats on getting your car back
__________________
'10 CTS-V : LPE 650+ Package 587hp / 582tq
2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI |
|
|
|
|
|
|
#880 | |
![]() ![]() ![]() ![]() ![]() Drives: 2010 LPE 650+ CTS-V Join Date: Oct 2008
Location: Sioux Falls, SD
Posts: 1,640
|
Quote:
I live in SD and if something small goes wrong with my car, they said I could take it to a good shop or dealership around here to get the work done. IF it is something major, then I would have to send it to them. Which is pretty fair. As long as you communicate your concerns and what you want, I am sure they will work with you. Best decision I could have made.
__________________
'10 CTS-V : LPE 650+ Package 587hp / 582tq
2.55 Upper / 8.6 Lower / ID850's / Kooks Longtubes / New Era CAI |
|
|
|
|
|
|
#881 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
Quote:
The 3/36 covers the engine only.. not the whole drivetrain. I asked this up front.. LPE will work with quality Tuning shops like Janetty racing, or my local Chevrolet service department for issues. Anything major would have to go back to LPE - Customer is responsible for shipping car both ways. |
|
|
|
|
|
|
#882 | |
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Drives: 2010 Join Date: Jul 2009
Location: NH
Posts: 4,788
|
Quote:
Welcome to the LPE brotherhood! |
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Lingenfelter 2010 Camaro Engine Packages Including New Vehicle Now Available | Tim@Lingenfelter | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 6 | 06-18-2010 08:11 AM |
| Lingenfelter 2010 Camaro Engine Packages - up to 800hp! | Sizzox | 5th Gen Camaro SS LS LT General Discussions | 108 | 04-14-2010 08:09 PM |
| My Lingenfelter Camaro Build | Speed74SS | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 244 | 10-08-2009 11:00 PM |
| Lingenfelter Supercharged Camaro makes 600 RWHP!! | Kevin@Lingenfelter | Forced Induction - V8 | 218 | 06-24-2009 03:26 PM |
| Three 2010 Camaros Arrive at Lingenfelter Performance Engineering | Sizzox | 5th Gen Camaro SS LS LT General Discussions | 25 | 04-26-2009 02:15 PM |