i found something interesting ... - Page 64 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AlexM · 03-07-2014, 12:45 PM

Quote:

Originally Posted by 19car69

I haven't had any trouble with the provided speaker producing static or popping.
Volume on the radio is much higher than on the mp 3 player. I have not figured out anything to fix that yet.
I have not tried getting in to the settings through the dial-er yet. I will look at that.
So far I have only used the plain EQ app. That only has base and treble. I do not have the Boston acoustic system so I don't know if that changes what you would want to use.
I have found that my Bluetooth does not show that it is connected until I use it in some way. However, even when the Bluetooth does not look like it is on if a call comes in it comes through the head unit.

The more I play with this system and figure stuff out, the more I like it. Feels like it is pretty plug and play from the hardware standpoint, but then there is lots of tweaking to do to really get enjoyment out of it.

I hear you. The volume on mine is crazy high. One little step turn on the volume knob (next to min/mute) is normal, one more is loud, one more is super loud/distortions (at only three little turns from mute, about 5% of total scale).

19car69 · 03-07-2014, 12:46 PM

That is a lot higher than mine at that level.

AlexM · 03-07-2014, 12:53 PM

Yeah, looks like it's not using pre-amp signals. It uses amplified signal to the BA amp that will amplify even more... Some members said there is a setting to program the unit for the systems that have a BA amp, just wasn't able to get in the settings, yet. Tried the ##210400## but did not do anything for me...

bnorman · 03-07-2014, 12:55 PM

The new 4.0 to get to the settings you go to the settings icon, then factory settings. From there enter the password 0000, then a couple thing:
#1 if u got the high resolution you want to change that to HD in shipping setttings
#2 in the canbus settings switch to HICES that may fix the popping but I don't have a BOSE.

Doing this on my phone so it doesn't want to cooperate

Yippee38 · 03-07-2014, 02:19 PM

Quote:

Originally Posted by bnorman

The new 4.0 to get to the settings you go to the settings icon, then factory settings. From there enter the password 0000, then a couple thing:
#1 if u got the high resolution you want to change that to HD in shipping setttings
#2 in the canbus settings switch to HICES that may fix the popping but I don't have a BOSE.

Doing this on my phone so it doesn't want to cooperate

Which is the high resolution? I've only seen 1024x600.

19car69 · 03-07-2014, 02:24 PM

Quote:

Originally Posted by Yippee38

Which is the high resolution? I've only seen 1024x600.

1024x600 is the high resolution.

AlexM · 03-07-2014, 02:34 PM

Quote:

Originally Posted by bnorman

The new 4.0 to get to the settings you go to the settings icon, then factory settings. From there enter the password 0000, then a couple thing:
#1 if u got the high resolution you want to change that to HD in shipping setttings
#2 in the canbus settings switch to HICES that may fix the popping but I don't have a BOSE.

Doing this on my phone so it doesn't want to cooperate

Thank you so much for the info, will try it!!!

bnorman · 03-07-2014, 03:31 PM

I suspect my trouble with iGo is I used the Middle East update as Lim told me. Obviously why all my maps are from the middle east. I was able to get maps forbthe US but it is a read only file so I cant paste them over. Hmmmm, wonder how I can explain that to Lim without a loss in translation.

19car69 · 03-07-2014, 03:59 PM

Quote:

Originally Posted by bnorman

I suspect my trouble with iGo is I used the Middle East update as Lim told me. Obviously why all my maps are from the middle east. I was able to get maps forbthe US but it is a read only file so I cant paste them over. Hmmmm, wonder how I can explain that to Lim without a loss in translation.

PM me your address real quick and I will copy the entire iGo_external file on a usb memory stick and send it to you.

jeffa · 03-07-2014, 04:14 PM

Quote:

Originally Posted by 19car69

PM me your address real quick and I will copy the entire iGo_external file on a usb memory stick and send it to you.

I'm really fimiliar with IGO navigation software. Each map software file has a license number assigned to it that is keyed to the SDID number on the mapping SD card that the mapping software is loaded on to. It prevents you from doing what you are trying to do, transfer mapping software to another card without buying a valid license for the 2nd SD card.

19car69 · 03-07-2014, 04:20 PM

Quote:

Originally Posted by jeffa

I'm really fimiliar with IGO navigation software. Each map software file has a license number assigned to it that is keyed to the SDID number on the mapping SD card that the mapping software is loaded on to. It prevents you from doing what you are trying to do, transfer mapping software to another card without buying a valid license for the 2nd SD card.

That makes since. I was just hoping to get his up and running faster.

AlexM · 03-07-2014, 06:11 PM

Quote:

Originally Posted by jeffa

I'm really fimiliar with IGO navigation software. Each map software file has a license number assigned to it that is keyed to the SDID number on the mapping SD card that the mapping software is loaded on to. It prevents you from doing what you are trying to do, transfer mapping software to another card without buying a valid license for the 2nd SD card.

What about to transfer from one card to a larger card? Is that possible?

19car69 · 03-07-2014, 07:43 PM

Quote:

Originally Posted by AlexM

What about to transfer from one card to a larger card? Is that possible?

Yes. I moved all my files to a 32gig card and put that in the unit. Works great.

AlexM · 03-07-2014, 09:29 PM

That's what I was thinking to do. Already ordered the 32Gb card

03-07-2014, 12:46 PM	#884
19car69 Drives: 2012 1LS Join Date: Oct 2013 Location: Leander, TX Posts: 257	That is a lot higher than mine at that level. __________________ 2012 1LS, Cold Air Inductions CAI, Apex scoop, Apex water bottle relocation, VMax Ported TB, Vitesse Throttle Controller, BMR Sway bars, BMR 1.2" drop springs, Koni rear shocks, Elite catch can, Solo Performance V6 Mach X-LFX Cat-Back Exhaust, Hex Vents, 1LE strut tower brace, Barton short throw, separate clutch reservoir, American Racing TORQ THRUST M 18X9, HiTS radio with reverse camera, GM Blade Dovetail spoiler, 2010 leather wrap steering wheel, vented engine cover, added Homelink to overhead console.

03-07-2014, 12:53 PM	#885
AlexM Drives: Used to be 2012 Camaro 2SS/RS L99 Join Date: Jan 2012 Location: Northern VA Posts: 636	Yeah, looks like it's not using pre-amp signals. It uses amplified signal to the BA amp that will amplify even more... Some members said there is a setting to program the unit for the systems that have a BA amp, just wasn't able to get in the settings, yet. Tried the ##210400## but did not do anything for me... __________________ BEE used to have MyLink with NAV Black 10 spoke FR41 wheels (ZL1 Replica) Roto-fab CF CAI / Scoop and Washer Bottle Relocation KIT Vmax yellow painted ported TB Solo HF Cats with Kooks 2.5" catback SLP Replica Spliter, CF Stripes and CF bowties Hawk ceramic brake pads OEM Strut Tower Brace - Yellow Plastidip Range device - AFM Delete Halo/DRL Harness (Halo/DRL on day and night while driving) Engine Cover/Air Compressor Delete

03-07-2014, 09:29 PM	#896
AlexM Drives: Used to be 2012 Camaro 2SS/RS L99 Join Date: Jan 2012 Location: Northern VA Posts: 636	That's what I was thinking to do. Already ordered the 32Gb card __________________ BEE used to have MyLink with NAV Black 10 spoke FR41 wheels (ZL1 Replica) Roto-fab CF CAI / Scoop and Washer Bottle Relocation KIT Vmax yellow painted ported TB Solo HF Cats with Kooks 2.5" catback SLP Replica Spliter, CF Stripes and CF bowties Hawk ceramic brake pads OEM Strut Tower Brace - Yellow Plastidip Range device - AFM Delete Halo/DRL Harness (Halo/DRL on day and night while driving) Engine Cover/Air Compressor Delete

03-07-2014, 12:55 PM	#886
bnorman Drives: 2015 1SS Join Date: Sep 2012 Location: Jax, Fl Posts: 189	The new 4.0 to get to the settings you go to the settings icon, then factory settings. From there enter the password 0000, then a couple thing: #1 if u got the high resolution you want to change that to HD in shipping setttings #2 in the canbus settings switch to HICES that may fix the popping but I don't have a BOSE. Doing this on my phone so it doesn't want to cooperate

03-07-2014, 03:31 PM	#890
bnorman Drives: 2015 1SS Join Date: Sep 2012 Location: Jax, Fl Posts: 189	I suspect my trouble with iGo is I used the Middle East update as Lim told me. Obviously why all my maps are from the middle east. I was able to get maps forbthe US but it is a read only file so I cant paste them over. Hmmmm, wonder how I can explain that to Lim without a loss in translation.