V8 bolt on help desk! Now available!! - Page 650 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ssmike · 02-16-2014, 08:31 AM

Quote:

Originally Posted by grocerygetter

Blower

Better answer!

Quote:

Originally Posted by Firefighter

I got it, Cam with Blower and Suspension...

Best answer!

joplatinum · 02-16-2014, 10:49 AM

lmao ok i got it .. a cam is next ..

Adrenaline12 · 02-17-2014, 07:34 AM

Quote:

Originally Posted by axis

Where are you installing them? If they're right off the headers, they may be ARH only as several headers have their own mounting right off them. If you're going to put them anywhere else, it doesn't matter.

I'm looking at the bolt on kit instead of the cutout/weld kit

axis · 02-17-2014, 10:26 AM

Quote:

Originally Posted by Adrenaline12

I'm looking at the bolt on kit instead of the cutout/weld kit

Can you link the kit you're looking at?

Birm · 02-18-2014, 09:38 AM

Cam and maybe some matching ported heads. That'd be the route I would go.

Adrenaline12 · 02-18-2014, 05:59 PM

Quote:

Originally Posted by axis

Can you link the kit you're looking at?

No problem , click here

grocerygetter · 02-19-2014, 10:38 AM

AXIS
umm...a birdie told me that you are going to have something good to post up by the weekend. I'm just poking the bear. I'll be in the area Friday so either I will be there when you are or I will hear about the outcome. Something about a breast enlargement? Lobotomy? pics maybe? I dunno?

axis · 02-19-2014, 11:07 AM

Quote:

Originally Posted by grocerygetter

AXIS
umm...a birdie told me that you are going to have something good to post up by the weekend. I'm just poking the bear. I'll be in the area Friday so either I will be there when you are or I will hear about the outcome. Something about a breast enlargement? Lobotomy? pics maybe? I dunno?

Epenis enlargement. schwing.

Come on down and see if you might want to have yours "enlarged" as well. Gonna be there EARLY. Like asscrack of dawn early. Anything before noon is early to me,

. Not sure of the pics. Don't know if i'm allowed to post the unicorn jism that's going to be done.

axis · 02-19-2014, 11:13 AM

Quote:

Originally Posted by Adrenaline12

No problem , click here

Those are just slip fittings. They'll work with any exhaust of the same size. You'll just need to do a little measuring and cutting, where as they are apparently made to fit with the ARH exhaust with no cutting. You could easily cut them in yourself or have any muffler shop do it. No big deal either way. Pretty much all aftermarket exhausts are modeled after the OEM routing for clearance.

grocerygetter · 02-19-2014, 03:01 PM

yeah...I'll be down there early Friday. I just say pics of the proof, not necessarily the product. You will have to have a pic of the proof so everyone can see it before it gets deleted. LMAO

Adrenaline12 · 02-19-2014, 03:47 PM

Quote:

Originally Posted by axis

Those are just slip fittings. They'll work with any exhaust of the same size. You'll just need to do a little measuring and cutting, where as they are apparently made to fit with the ARH exhaust with no cutting. You could easily cut them in yourself or have any muffler shop do it. No big deal either way. Pretty much all aftermarket exhausts are modeled after the OEM routing for clearance.

Ok So I'm thinking I would be better off with the 2.5", I got the SP headers with the high flow cats they connect at 3" for the headers then to the stock exhaust which is 2.5 correct? so If I connect these as picture for the 2.5... they may fit?

grocerygetter · 02-19-2014, 04:30 PM

Quote:

Originally Posted by Adrenaline12

Ok So I'm thinking I would be better off with the 2.5", I got the SP headers with the high flow cats they connect at 3" for the headers then to the stock exhaust which is 2.5 correct? so If I connect these as picture for the 2.5... they may fit?

yes. stock is 2.5". You could benefit from a full 3" minorly...but the cost of catted sections isn't cheap. You would have to buy a straight 3" catted section or a 3" straight cat delete...one of the two. That would allow you to use a 3" catback.

axis · 02-19-2014, 06:05 PM

Quote:

Originally Posted by Adrenaline12

Ok So I'm thinking I would be better off with the 2.5", I got the SP headers with the high flow cats they connect at 3" for the headers then to the stock exhaust which is 2.5 correct? so If I connect these as picture for the 2.5... they may fit?

Correct.

If you have no plans to go hog wild on your engine, 2.5in is more than plenty.

grocerygetter · 02-19-2014, 10:48 PM

Quote:

Originally Posted by axis

Correct.

If you have no plans to go hog wild on your engine, 2.5in is more than plenty.

Troof!

02-16-2014, 10:49 AM	#9088
joplatinum Drives: camaro ss Join Date: Dec 2013 Location: california Posts: 54	lmao ok i got it .. a cam is next .. __________________ 2010 2ss/rs/GFX Favorite L99 Kooks LTs no cats Corsa Exhaust Knn intake ( rotofab soon ) Seibon Hood Seibon Trunk pd Springs Giovanna Staggered 22"

02-19-2014, 10:38 AM	#9093
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	AXIS umm...a birdie told me that you are going to have something good to post up by the weekend. I'm just poking the bear. I'll be in the area Friday so either I will be there when you are or I will hear about the outcome. Something about a breast enlargement? Lobotomy? pics maybe? I dunno? __________________ -John S.

02-19-2014, 03:01 PM	#9096
grocerygetter instigator Drives: 2020 6.2 Trail Boss, 2022 XC90 Join Date: Jan 2010 Location: 72034 Posts: 3,979 View My Garage	yeah...I'll be down there early Friday. I just say pics of the proof, not necessarily the product. You will have to have a pic of the proof so everyone can see it before it gets deleted. LMAO __________________ -John S.

02-18-2014, 09:38 AM	#9091
Birm Drives: Florida Speed & Power Join Date: Jan 2011 Location: Pinellas Park, FL Posts: 3,185	Cam and maybe some matching ported heads. That'd be the route I would go.