Official 60 ft/time 2010+ Camaro Fast List - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Roc Spo · 08-19-2012, 09:48 AM

Went to 75/80 Dragway on Saturday to test out the new Pedders coilovers Tim at T&T Performance installed on my car. Had my best 60ft ever, with a 1.459. Unfortunately, I missed 2nd gear, so it didn't translate into my best et. Tim figures that if we soften up the shocks a litte more, and drop the pressure in the slicks 1/2 pound from the current 14 lbs, I can leave at 4,200rpm, instead of the current 4,000, and maybe get into the 1.30s. Not bad for a 4,300lb daily driver with a manual transmission! Other than the Pedders, everything else on the car is the same as my last submission to the fastest 60ft thread. BTW, That's Tim's ZL1 that ran the 10.88 in the left lane, running M&H drag radials.

I know it won't change my position on the list, but please update my 60 ft time. My mods are the same as my previous submission, with the exception of the Pedder's Supercar coilovers replacing the KWs.
Hoosier slicks 16x19x28
Pedder's Bushings & Supercar coilovers
1000hp axles
subframe connectors
trailing arms
Ford 9" center section
Stock M6 transmission

E.T. · 08-19-2012, 07:20 PM

Finally cut a sub-2-second time

60 ft/time: 1.9652
Tire Brand/Type: Stock Pirelli P Zero
Tire Size: 275/40/ZR20
Suspension Upgrades: None
Drivetrain Upgrades: Stock
Automatic or Manual transmission: A6
Rear Gear Ratio: 3.70

BMR guy · 08-30-2012, 01:28 PM

Whoaa, lots of new posts in the thread. I've been away for a while so let me get cracking on updating the list!

Camaro21 · 08-30-2012, 02:14 PM

Will you update my Clutch on my 60' time? The 1.58 60' was made with the Street Slayer Triple Carbon clutch not with the LPE Clutch.

BMR guy · 08-30-2012, 03:09 PM

Those are some good numbers with both sets of tires. You placed well in each category.

Quote:

Originally Posted by SRT10KLLR

60 ft/time: 1.786

Tire Brand/Type: Nitto NT420S Street Tires

Tire Size: 295/30/22

Suspension Upgrades: BMR Trailing Arms

Drivetrain Upgrades: Stock

Automatic or Manual transmission: Auto - A6 (6L80)

Rear Gear Ratio: Stock - 3.27

BMR guy · 08-30-2012, 03:25 PM

Quote:

Originally Posted by Camaro21

Will you update my Clutch on my 60' time? The 1.58 60' was made with the Street Slayer Triple Carbon clutch not with the LPE Clutch.

Got it!

BMR guy · 08-30-2012, 03:29 PM

Congrats! There are very few people in the 1.40's and that's a solid time.

Quote:

Originally Posted by Roc Spo

Went to 75/80 Dragway on Saturday to test out the new Pedders coilovers Tim at T&T Performance installed on my car. Had my best 60ft ever, with a 1.459. Unfortunately, I missed 2nd gear, so it didn't translate into my best et. Tim figures that if we soften up the shocks a litte more, and drop the pressure in the slicks 1/2 pound from the current 14 lbs, I can leave at 4,200rpm, instead of the current 4,000, and maybe get into the 1.30s. Not bad for a 4,300lb daily driver with a manual transmission! Other than the Pedders, everything else on the car is the same as my last submission to the fastest 60ft thread. BTW, That's Tim's ZL1 that ran the 10.88 in the left lane, running M&H drag radials.

I know it won't change my position on the list, but please update my 60 ft time. My mods are the same as my previous submission, with the exception of the Pedder's Supercar coilovers replacing the KWs.
Hoosier slicks 16x19x28
Pedder's Bushings & Supercar coilovers
1000hp axles
subframe connectors
trailing arms
Ford 9" center section
Stock M6 transmission

BMR guy · 08-30-2012, 03:31 PM

Another 1.7 on street tires, congrats! We now have five 1.7's on street tires, I keep waiting to see that magic 1.6 pop up in the thread. Who will be the first??

Quote:

Originally Posted by BumbleBeeSS2009

Street Tires

60 ft/time: 1.789

Tire Brand/Type: Continental DWS
Tire Size: 315/35/20
Suspension Upgrades: None
Drivetrain Upgrades: FTI 3000 Converter
Automatic or Manual transmission: A6
Rear Gear Ratio: 3.23

BMR guy · 08-30-2012, 03:36 PM

Quote:

Originally Posted by Padre

Mine was listed wrong. In post #5 I posted 1.565 not 35.

Padre

Thanks for the honesty...even though it dropped you 2 places

BMR guy · 08-30-2012, 03:39 PM

Damn! You guys are knocking on the 1.20's! As far as I know nobody has dipped into the 1.20's in an IRS 5th Gen. When are you guys going back to the track? I know you have more in it....

Quote:

Originally Posted by Farks Supercars

Wanted to update the Lou@ARH/Farks Supercars time.

We added a set of the Farks solid upper control arm bushings.

1.324 60' time

SRT10KLLR · 08-31-2012, 09:57 PM

Quote:

Originally Posted by BMR guy

Those are some good numbers with both sets of tires. You placed well in each category.

It must be the trailing arms.

Maybe I should try and squeeze it out of the whole next time on the street tires.

blufin · 09-01-2012, 03:25 PM

There seems to be a log jam around the 1.78 area, so I thought I would thin the herd a little. I'm pretty happy to be one of the few M6 in this category.
Car is riding on the stock Pirelli PZero's, stock suspension, stock gears.

BMR guy · 09-04-2012, 08:52 AM

Quote:

Originally Posted by SRT10KLLR

It must be the trailing arms.

Maybe I should try and squeeze it out of the whole next time on the street tires.

Do it! You might get lucky and get it to hook long enough to dip into the 1.6's! A 1.699 would probably last a while before someone took you down.

BMR guy · 09-04-2012, 08:55 AM

Quote:

Originally Posted by blufin

There seems to be a log jam around the 1.78 area, so I thought I would thin the herd a little. I'm pretty happy to be one of the few M6 in this category.
Car is riding on the stock Pirelli PZero's, stock suspension, stock gears.

That is definitely respectable. You must be a "master clutch slipper" to milk that time out of an M6 car with stock street tires!

08-19-2012, 09:48 AM	#85
Roc Spo Drives: 2010 Camaro ss/rs manual Join Date: Jun 2009 Location: Edgewater Maryland Posts: 69	Went to 75/80 Dragway on Saturday to test out the new Pedders coilovers Tim at T&T Performance installed on my car. Had my best 60ft ever, with a 1.459. Unfortunately, I missed 2nd gear, so it didn't translate into my best et. Tim figures that if we soften up the shocks a litte more, and drop the pressure in the slicks 1/2 pound from the current 14 lbs, I can leave at 4,200rpm, instead of the current 4,000, and maybe get into the 1.30s. Not bad for a 4,300lb daily driver with a manual transmission! Other than the Pedders, everything else on the car is the same as my last submission to the fastest 60ft thread. BTW, That's Tim's ZL1 that ran the 10.88 in the left lane, running M&H drag radials. I know it won't change my position on the list, but please update my 60 ft time. My mods are the same as my previous submission, with the exception of the Pedder's Supercar coilovers replacing the KWs. Hoosier slicks 16x19x28 Pedder's Bushings & Supercar coilovers 1000hp axles subframe connectors trailing arms Ford 9" center section Stock M6 transmission Last edited by Roc Spo; 08-29-2012 at 09:06 AM. Reason: hoping to have my time updated

08-19-2012, 07:20 PM	#86
E.T. Drives: 2012 Camaro 2SS/RS Join Date: Jul 2010 Location: Cleveland, OH Posts: 3,272	Finally cut a sub-2-second time 60 ft/time: 1.9652 Tire Brand/Type: Stock Pirelli P Zero Tire Size: 275/40/ZR20 Suspension Upgrades: None Drivetrain Upgrades: Stock Automatic or Manual transmission: A6 Rear Gear Ratio: 3.70 Attached Images __________________

09-01-2012, 03:25 PM	#96
blufin Drives: Fire Engine Join Date: Oct 2008 Location: WPB, Florida Posts: 1,415	60' list There seems to be a log jam around the 1.78 area, so I thought I would thin the herd a little. I'm pretty happy to be one of the few M6 in this category. Car is riding on the stock Pirelli PZero's, stock suspension, stock gears. Attached Images __________________ 12.618 @ 110.75 Bone Stock 1/4 mile 8.165 @ 86.52 Bone Stock 1/8 mile 11.189 @ 124.44 on a 1.73 60' TVS2300 3.4 pulley, JRE tuned, Kooks LT headers and HF cats, MBRP catback exhaust, CAI intake, ADM scoop. Stock wheels/tires. Sold

08-30-2012, 01:28 PM	#87
BMR guy Drives: 2010 1SS Join Date: Jan 2010 Location: Tampa, FL Posts: 1,002	Whoaa, lots of new posts in the thread. I've been away for a while so let me get cracking on updating the list!

08-30-2012, 02:14 PM	#88
Camaro21 Drives: SOLD - 2013 M6 ZL1 Join Date: Jul 2009 Location: Texas Posts: 5,041 View My Garage	Will you update my Clutch on my 60' time? The 1.58 60' was made with the Street Slayer Triple Carbon clutch not with the LPE Clutch.