2013 ZL1 CRT vert delivered (Overpar73) [COTW 10/13/14] - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

45TH RS · 11-26-2012, 07:43 PM

Very Nice!

OVERPAR73 · 11-28-2012, 03:42 PM

Received my new ceramic brake pads last night and just ordered the cross drilled and slotted rotors, so I will change everthing out as soon as everything gets here. I'm also going with the chrome OEM wheels (5 spoke). Now I will have to sell all the old stuff, everything has less than 400 miles on it. I'm hoping there will be takers out there. I was tired of all the brake dust, having to clean the rims after evey drive, that's my OCD kicking in.

bwolf11 · 11-28-2012, 04:03 PM

OVER....I had the 5 spoke chrome and powder coated them gloss black for the same reason. I had the ceramic pads on my SS and they were not as good as the oem and the brake set up on the ZL1 has very good reviews.

OVERPAR73 · 11-29-2012, 07:00 PM

Bwolf11,
Can you post a couple pics of your wheels, thanks.

69NMYSS · 11-29-2012, 07:38 PM

Quote:

Originally Posted by OVERPAR73

Received my new ceramic brake pads last night and just ordered the cross drilled and slotted rotors, so I will change everthing out as soon as everything gets here. I'm also going with the chrome OEM wheels (5 spoke). Now I will have to sell all the old stuff, everything has less than 400 miles on it. I'm hoping there will be takers out there. I was tired of all the brake dust, having to clean the rims after evey drive, that's my OCD kicking in.

Did you buy new bolts for the calipers or are you going to use the same bolts. I ask because I am about to change out my rotors but heard the bolts are TTY and must be replaced?

OVERPAR73 · 11-29-2012, 08:01 PM

I haven't heard that, I will have to do some checking.

69NMYSS · 11-29-2012, 08:04 PM

Quote:

Originally Posted by OVERPAR73

I haven't heard that, I will have to do some checking.

I will do the same, if you here anything please let me know and I will do the same.

bwolf11 · 11-30-2012, 09:12 AM

wWill do....stay tuned.

bwolf11 · 11-30-2012, 03:30 PM

Here ya go.........as you can also see I did the side makers....subtle changes is what I like...not all the big changes!

Zl1 #586 · 11-30-2012, 06:19 PM

Quote:

Originally Posted by OVERPAR73

I finally got my license plate taken care of and got the front installed on the slider and looking good. If you look at the rear picture of the valance I installed two 1/4" reflective tape across the top of the black valance, it really reflects at night, this is the same tape I have on my wheels.

Lupe e-mailed me that he shipped my engine cover and cross strut today, I can hardly wait to get these installed on the car, I know these are going to look amazing!!

where did you get the front plate holder and does it scrape

OVERPAR73 · 11-30-2012, 07:18 PM

ZL1 #586
I got my front plate holder at this web site off e-bay:

http://www.ebay.com/itm/390417788357...84.m1423.l2649

OVERPAR73 · 11-30-2012, 11:19 PM

I received my afterburner tail lights this week and I started to pull the old lights out tonight, I'm on hold until tomorrow to get some t-taps to wire them up. I also installed some tint on the lights. I will take some pics after I get everything installed. I'm thinking about leaving off the chrome surrounds, I already have some tubing to go around the lights, I will see how it looks.

con10der · 12-01-2012, 12:08 AM

Sweet Ride, Nice additions....

OVERPAR73 · 12-02-2012, 09:12 PM

Got my afterburner tail lights installed last night, what a real pain in the butt trying to wire these things in, but I'm really happy with the outcome, they look really sharp!

11-26-2012, 07:43 PM	#85
45TH RS Drives: 2012 45TH 2LT RS Join Date: Jul 2012 Location: Michigan Posts: 271	Very Nice! __________________

11-30-2012, 03:30 PM	#93
bwolf11 Drives: 2012 Camaro ZL1/2018 ZL1 1LE Join Date: Mar 2009 Location: Marlton, NJ Posts: 119 View My Garage	Here ya go.........as you can also see I did the side makers....subtle changes is what I like...not all the big changes! Attached Images

12-01-2012, 12:08 AM	#97
con10der Con10der Drives: 2010 2SS/RS M6 IOM Rally Stripes Join Date: Aug 2012 Location: Carlsbad, New Mexico Posts: 97 View My Garage	Sweet Ride, Nice additions.... __________________ 2010 2SS/RS M6 IOM w/Rally Stripes. BLK CAI w/ADM,WW Relo,2" Kooks,3" Cats-Mids,Vmax Ported TB,Muff Del,Janetty SCT Tuned,Drill/Slot BLK Hawk rotors,Red Grani Brake Lines,Motul 600,IDEAL Master w/res,Moroso CC,Accel Silver Tips w/TVolt 10.4mm,MGW shift w/Retro hand/ball,ABL Kit,Billet/IOM pedals, ZL1 split,Lloyds SS mats,PC Droid4/MAXX docking,HW Solo2. Pend Install: Launch/Shift Light,BMR Susp/1" Drop/Sways/Track Pack,GM 3.9. Future: Janetty Pumpkin w/PosiTrac,1400HP axl,CF DS,Tick Stage 2 Trans,3 Disc Clutch,4"quad tip,center exit AB w/diff...

12-02-2012, 09:12 PM	#98
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	Afterburner tail lights Got my afterburner tail lights installed last night, what a real pain in the butt trying to wire these things in, but I'm really happy with the outcome, they look really sharp! Attached Images

11-28-2012, 03:42 PM	#86
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	Received my new ceramic brake pads last night and just ordered the cross drilled and slotted rotors, so I will change everthing out as soon as everything gets here. I'm also going with the chrome OEM wheels (5 spoke). Now I will have to sell all the old stuff, everything has less than 400 miles on it. I'm hoping there will be takers out there. I was tired of all the brake dust, having to clean the rims after evey drive, that's my OCD kicking in.

11-28-2012, 04:03 PM	#87
bwolf11 Drives: 2012 Camaro ZL1/2018 ZL1 1LE Join Date: Mar 2009 Location: Marlton, NJ Posts: 119 View My Garage	OVER....I had the 5 spoke chrome and powder coated them gloss black for the same reason. I had the ceramic pads on my SS and they were not as good as the oem and the brake set up on the ZL1 has very good reviews.

11-29-2012, 07:00 PM	#88
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	Bwolf11, Can you post a couple pics of your wheels, thanks.

11-29-2012, 08:01 PM	#90
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	I haven't heard that, I will have to do some checking.

11-30-2012, 09:12 AM	#92
bwolf11 Drives: 2012 Camaro ZL1/2018 ZL1 1LE Join Date: Mar 2009 Location: Marlton, NJ Posts: 119 View My Garage	wWill do....stay tuned.

11-30-2012, 07:18 PM	#95
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	ZL1 #586 I got my front plate holder at this web site off e-bay: http://www.ebay.com/itm/390417788357...84.m1423.l2649

11-30-2012, 11:19 PM	#96
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,472 View My Garage	I received my afterburner tail lights this week and I started to pull the old lights out tonight, I'm on hold until tomorrow to get some t-taps to wire them up. I also installed some tint on the lights. I will take some pics after I get everything installed. I'm thinking about leaving off the chrome surrounds, I already have some tubing to go around the lights, I will see how it looks.