BBK Headers for V6 2010 Camaros! PHASTEK Performance - Page 7 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

xtreme industries · 01-20-2010, 03:23 PM

Hi Jason

is there any information regarding CEL. will these throw a code?

Sean@Phastek · 01-29-2010, 03:49 PM

Quote:

Originally Posted by xtreme industries

Hi Jason

is there any information regarding CEL. will these throw a code?

Nope, everything from BBK says these are good to go without any issues. BBK is always really good about fully testing their products too, hence their 'easy no-hassle bolt-on' motto

scrming · 01-29-2010, 04:27 PM

Quote:

Originally Posted by Sean@Phastek

Nope, everything from BBK says these are good to go without any issues. BBK is always really good about fully testing their products too, hence their 'easy no-hassle bolt-on' motto

typically long tubes will throw the occasional CEL... but then again the typical LT buyer already has an aftermarket tune with the rear O2s turned off or uses MIL eliminators...

Sean@Phastek · 02-09-2010, 05:59 PM

Here is a sweet sound clip of the V6 full length headers from BBK:

Beauwulf · 02-09-2010, 06:04 PM

Quote:

Originally Posted by Sean@Phastek

Here is a sweet sound clip of the V6 full length headers from BBK:

Quit teasing already and give me a set! hehe!

ROD1 · 02-09-2010, 09:57 PM

So what happened to the sound clip?

Sean@Phastek · 02-15-2010, 10:35 AM

Quote:

Originally Posted by ROD1

So what happened to the sound clip?

Check out the Video posted above for the sound of these headers on the dyno

ROD1 · 02-15-2010, 10:37 AM

Quote:

Originally Posted by Sean@Phastek

Check out the Video posted above for the sound of these headers on the dyno

Yeah I got it after going back and using firefox intead of google chrome. Flash player doesnt support 64 bit. My bad.

montej23 · 02-15-2010, 11:03 AM

So let me get this straight whats in this package besides headers?

2010SSRSM6 · 02-16-2010, 12:03 AM

Quote:

Originally Posted by bmwdon

nice pricing....

oh yeah, any purty pictures of the products?

Here is a link to the meet we are having at their new facility. Half way down the 1st page are pic's of their stuff from SEMA.

Enjoy

http://www.camaro5.com/forums/showthread.php?t=61236

Sean@Phastek · 02-23-2010, 10:37 AM

Quote:

Originally Posted by 2010SSRSM6

Here is a link to the meet we are having at their new facility. Half way down the 1st page are pic's of their stuff from SEMA.

Enjoy

http://www.camaro5.com/forums/showthread.php?t=61236

Awesome!!

Be sure to get some great pictures for everyone!

bluedevil02 · 03-08-2010, 08:51 PM

so anyone have these yet?

bmwdon · 03-09-2010, 09:06 AM

I shot Sean a PM yesterday asking if these were shipped on time or if they got pushed back....just waiting for a reply

devildoc · 03-09-2010, 10:13 AM

I was told that they wouldn't be ready to ship until April time frame....
These are expected to release next month, we offer different finishes so I’ve listed them below.

4041

2010 CAMARO V6 1-5/8" FULL-LENGTH HEADERS W/HIGH-FLOW CATS (CHROME)

699.99

40410

2010 CAMARO V6 1-5/8" FULL-LENGTH HEADERS W/HIGH-FLOW CATS (POLISHED CERAMIC)

799.99

40415

2010 CAMARO V6 1-5/8" FULL LENGTH HEADERS W/HIGH-FLOW CATS (304 STAINLESS)

899.99

Sarah Zeal

National Sales Assistant

p:951.296.1771*206

f: 951.296.9024

www.bbkperformance.com

03-09-2010, 09:06 AM	#97
bmwdon I refuse to go smurfy Drives: 2009 Challenger SRT8, 2010 Camaro Join Date: Nov 2009 Location: MD Posts: 1,311	I shot Sean a PM yesterday asking if these were shipped on time or if they got pushed back....just waiting for a reply __________________ -Bill...the Camaro was my wifes, now she's got a minivan Challenger- 2009 Dodge Challenger SRT8 Procharger D1 Supercharger: 10.895 @ 126.720 MPH

03-09-2010, 10:13 AM	#98
devildoc Drives: '12 Toyota Tacoma Dbl Join Date: Sep 2009 Location: Beaufort, SC Posts: 1,275 View My Garage	I was told that they wouldn't be ready to ship until April time frame.... These are expected to release next month, we offer different finishes so I’ve listed them below. 4041 2010 CAMARO V6 1-5/8" FULL-LENGTH HEADERS W/HIGH-FLOW CATS (CHROME) 699.99 40410 2010 CAMARO V6 1-5/8" FULL-LENGTH HEADERS W/HIGH-FLOW CATS (POLISHED CERAMIC) 799.99 40415 2010 CAMARO V6 1-5/8" FULL LENGTH HEADERS W/HIGH-FLOW CATS (304 STAINLESS) 899.99 Sarah Zeal National Sales Assistant p:951.296.1771206 f: 951.296.9024 www.bbkperformance.com __________________ MRT V2\|Trifecta Tune\|Airaid\|ARH LTs\|Eibach Sways STANDING 1/4MI: 13.948@99.87* 6600RPM HP/TQ Gains - 30.54HP/24.3TQ (NOT PEAK)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	67	11-27-2024 09:02 AM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 01:59 AM
2010 Camaro for SEMA -- New Videos: GM Performance Parts teases	socialomar	Camaro Photos \| Spyshots \| Video \| Media Gallery	142	11-05-2008 12:55 AM
4 SEMA CAMAROS finally unveiled by GM! (hi-res images & details)	FenwickHockey65	Camaro Photos \| Spyshots \| Video \| Media Gallery	237	11-03-2008 11:39 PM

01-20-2010, 03:23 PM	#85
xtreme industries Drives: 2010 Camaro 2lt RS Join Date: Sep 2009 Location: Calgary, AB, Canada Posts: 548	Hi Jason is there any information regarding CEL. will these throw a code?

02-09-2010, 05:59 PM	#88
Sean@Phastek Drives: 2010 Camaro X5 Turbo Join Date: Sep 2009 Location: Houston Posts: 656	Here is a sweet sound clip of the V6 full length headers from BBK:

02-09-2010, 09:57 PM	#90
ROD1 Retired Drives: 2010 Camaro RS V6 #1301 DOB 3/23/09 Join Date: Aug 2009 Location: Ithaca NY Posts: 2,563	So what happened to the sound clip?

02-15-2010, 11:03 AM	#93
montej23 Drives: 2011 VR Camaro Join Date: Jun 2009 Location: Arkansas Posts: 974 View My Garage	So let me get this straight whats in this package besides headers?

03-08-2010, 08:51 PM	#96
bluedevil02 Drives: 2LT/RS Join Date: Jul 2009 Location: San Antonio Posts: 844	so anyone have these yet?