![]() |
|
|
#85 |
|
MOD SQUAD
|
There is a small amount of drone around 1300 RPM's in 6th gear but it only occurs when you put a load on the engine. As soon as the drone starts if you back off the throttle a little bit the drone goes away. Dynamat is now making Superlite Dynamat (see here Dynamat). I'm going to try this in the trunk to see if helps out with both the small amount of drone and wheel/road noise. The trunk has basically no insulation at all other than the trunk mat so I'm thinking the Dynamat will quiet all nose down better than stock.
The ARH is by far the best sounding exhaust I have ever heard on an LS engine and I drink Flowmaster Kool Aid. I'm never taking mine off. IMVHO the drone is very minor and I can live with it... Same here, I can not believe how much performance a full exhaust system gives my Camaro... Hell, even the TC is having a hard time keeping up! ![]() Oh, and for those keeping track, My check engine light finally came on... Looks like I got the codes for the cats not heating up fast enough. No biggie, If I was worried about it I would have never put the full system on.
__________________
Who cares about the Blue Oval crowd and their little Ponys? We're getting our Camaro back-and it'll be Supercharged!-MDAII Team LS3 |
|
|
|
|
|
#86 |
|
12.23s@113mph
Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009
Location: Houston, TX
Posts: 1,197
|
what does the inside of the mufflers look like?
is it perforated pipe wrapped in filling like steel wool, is it straight through like corsa's RST technology, or does it have baffles and such like flowmaster?
__________________
RIP Cammie 7/15/2009 - 4/1/2011 |
|
|
|
|
|
#87 |
|
MOD SQUAD
|
Perforated pipe and is a straight through design.
__________________
Who cares about the Blue Oval crowd and their little Ponys? We're getting our Camaro back-and it'll be Supercharged!-MDAII Team LS3 |
|
|
|
|
|
#88 |
![]() ![]() ![]() Drives: 2010 2SS/RS M6 Black on Black Join Date: Jan 2010
Location: Global Citizen
Posts: 1,243
|
The problem with the GFX is not so much the diameter of the opening, but the placement of the tips front-to-rear. A 4" tip should fit within the dished portion of the GFX fitting, but the tip has to be placed more forward (more inset in the housing) to match with the dished portion. You may need to cut some length from the exhaust pipe as well as from the tip's pipe to get it to fit within the GFX housing.
I tried to install the GMPP axle back with 4" tips (they're bigger than 4" BTW) and they wouldn't fit without major mods. I ended up getting the quieter version without tips, and had custom tips added later. They had to cut the pipe almost all the way back to the hanger rods. Cutting off the tips from the original GMPP setup was too much work for my dealer so I went the other route.
__________________
Meh
|
|
|
|
|
|
#89 |
![]() ![]() ![]() ![]() Drives: Black & Blue 1SS Join Date: Apr 2010
Location: Back In The Desert
Posts: 1,257
|
Hey guys I just installed 1 7/8 headers and a three inch all the way back to the stock mufflers. Is it normal for me to have a lot of drone with stock mufflers. Its almost unbearable. I'm not going to lie I love the sound of the exhaust from the outside but not from the inside. It hits a tiny bit at idles I did use the washers on the cross bar.
Any ideas? |
|
|
|
|
|
#90 |
![]() ![]() ![]() ![]() Drives: Black & Blue 1SS Join Date: Apr 2010
Location: Back In The Desert
Posts: 1,257
|
Annyone? :-)
|
|
|
|
|
|
#91 |
|
12.23s@113mph
Drives: 2SS/RS, A6, just a few bolt ons Join Date: Jul 2009
Location: Houston, TX
Posts: 1,197
|
do you have an automatic with AFM enabled? that could be your problem.
__________________
RIP Cammie 7/15/2009 - 4/1/2011 |
|
|
|
|
|
#92 |
![]() ![]() ![]() ![]() Drives: Black & Blue 1SS Join Date: Apr 2010
Location: Back In The Desert
Posts: 1,257
|
No :( a M6
|
|
|
|
|
|
#93 |
|
Blessed
Drives: 2013 Sonic RS MT Join Date: Dec 2007
Location: Saint Augustine FL
Posts: 28,441
|
Hmmm... Everyone else I know has an aftermarket axle back...
I could shoot a vid of the exaust sound from the inside of my car.... but it will be hard to tell... If you'd like I will take a quick vid and post it tomorrow... My ARH setup does drone a bit but mostly when cruising ant real low RPM... say around 1500... it actually gets a little quieter with more rpms...
__________________
Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals." |
|
|
|
|
|
#94 | |
![]() ![]() ![]() ![]() Drives: Black & Blue 1SS Join Date: Apr 2010
Location: Back In The Desert
Posts: 1,257
|
Quote:
|
|
|
|
|
|
|
#95 |
|
Hawaii 5-O
|
Did your Check Engine Light come on after installing the ARH exhaust system. I purchased the entire system also, had a local shop install for me and now the Check Engine Light has came on. Suggestions?
|
|
|
|
|
|
#96 |
![]() ![]() ![]() ![]() Drives: Black & Blue 1SS Join Date: Apr 2010
Location: Back In The Desert
Posts: 1,257
|
Ya mine came on I was expecting to though . Since there are not cats or anything
|
|
|
|
|
|
#97 | ||
|
MOD SQUAD
|
Quote:
Quote:
__________________
Who cares about the Blue Oval crowd and their little Ponys? We're getting our Camaro back-and it'll be Supercharged!-MDAII Team LS3 |
||
|
|
|
|
|
#98 |
![]() Drives: 2ss Join Date: Jul 2011
Location: west sac, ca
Posts: 16
|
awesome set up
Did it make a huge difference?
|
|
|
|
|
|
|
|
![]() |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| V8 Camaro Performance Upgrades List | Milk 1027 | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 93 | 08-30-2021 06:56 PM |
| LMPerformance Inc., Flowmaster 2010 Camaro American Thunder Exhaust System 3.6L V6. | LMPerformance | V6 Bolt-Ons & Tunes | 5 | 07-05-2010 03:32 PM |
| GM Reveals 2011 Chevrolet Silverado HD | FenwickHockey65 | General Automotive + Other Cars Discussion | 55 | 03-04-2010 02:56 PM |
| 2010 Camaro American Racing Headers FREE Shipping | MoranoRacing | V8 Bolt-Ons & Tunes | 2 | 02-10-2010 09:45 PM |
| NEED TO KNOW AMERICAN RACING HEADERS QUESTION!!! PLEASE HELP ME OUT!! | 1sickss | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 20 | 11-12-2009 12:21 PM |