![]() |
|
|
#1037 |
![]() Drives: 2013 2lt Join Date: Sep 2012
Location: Midland,TX
Posts: 240
|
I have a problem. I hooked everything up and it works. If I turn my engine on I get a loud pop from my subs. And the buttons don't light up, but the screen does. When the car is off with the key turned to acc everything works as usual. Any ideas? My amps power cable isn't hooked up to the radio. Could that be causing these problems?
|
|
|
|
|
|
#1038 |
![]() Drives: 2013 2lt Join Date: Sep 2012
Location: Midland,TX
Posts: 240
|
ok so i reset the unit and its working fine. hopefully tomorrow when i drive it to work it won't freak out on me
|
|
|
|
|
|
#1039 | |
![]() Drives: 2013 2lt Join Date: Sep 2012
Location: Midland,TX
Posts: 240
|
Quote:
thanks |
|
|
|
|
|
|
#1040 |
![]() |
Good to knkw keep is updated. I want to get one but seems like there are still bugs to work and no 1gb ram...did you have to cut down the unit to fit and also desolder that transistor or w.e it was?
Sent from my MB855 using Tapatalk 2
__________________
________________________________
2012 2LS Performance Mods: VMAX PTB, Vitesse Throttle Control, Cold Air Inductions CAI, Engine Bay: Camaro Oil Dip Stick Handle Cover Internal Mods: Hurst Automatic Shifter Plate, GM 4-Pack Gauges Cluster Kit, External Mods: 22" wheels |
|
|
|
|
|
#1041 |
![]() Drives: 2013 2lt Join Date: Sep 2012
Location: Midland,TX
Posts: 240
|
i didn't do any cutting or modified the radio. i havent updated either.
|
|
|
|
|
|
#1042 |
![]() |
Was it a perfect fit? Did light from behind the unit show from the top where most had issues with a gap?
Sent from my MB855 using Tapatalk 2
__________________
________________________________
2012 2LS Performance Mods: VMAX PTB, Vitesse Throttle Control, Cold Air Inductions CAI, Engine Bay: Camaro Oil Dip Stick Handle Cover Internal Mods: Hurst Automatic Shifter Plate, GM 4-Pack Gauges Cluster Kit, External Mods: 22" wheels |
|
|
|
|
|
#1043 |
![]() Drives: 2012 1LS Join Date: Oct 2013
Location: Leander, TX
Posts: 257
|
My system came with 4.0 so I can't say for that upgrade, but with the update I did to get the OBDII bluetooth working the files needed to be in the root directory of the card.
I had to do fitting to get mine to be a great fit. I also have found that on hotter days it does not appear to be making a good connection for the A/C controls. I believe this is caused by the heat making the dash and unit expand just enough to stop those connections from working good. I am going to try using a little larger spacers behind the in dash part of the unit. That should bring it a little further out and have it make a better connection to the face plate. This unit is not perfect so no one should assume they won't be playing with things to get it just the way they want. For me, the benefits far outweigh the problems so far. You may hear me say it different if the A/C controls don't fix with my idea. At my age a summer in Texas without A/C sucks really bad.
__________________
2012 1LS, Cold Air Inductions CAI, Apex scoop, Apex water bottle relocation, VMax Ported TB, Vitesse Throttle Controller, BMR Sway bars, BMR 1.2" drop springs, Koni rear shocks, Elite catch can, Solo Performance V6 Mach X-LFX Cat-Back Exhaust, Hex Vents, 1LE strut tower brace, Barton short throw, separate clutch reservoir, American Racing TORQ THRUST M 18X9, HiTS radio with reverse camera, GM Blade Dovetail spoiler, 2010 leather wrap steering wheel, vented engine cover, added Homelink to overhead console.
|
|
|
|
|
|
#1044 |
![]() Drives: 2013 2lt Join Date: Sep 2012
Location: Midland,TX
Posts: 240
|
i only used weather stripping. it isn't perfect, but it will do for now. and looks like ill be putting spacers in my radio. Im only 21, but being a colorado native living in texas i can't stand the heat!
|
|
|
|
|
|
#1045 |
|
BUMBL Z
|
for those with 512mb ram, how is performance? also, from the picture, it looks like the rectangular chip on the back is the ram chip, and it looks like it could just pop out and be upgraded. anyone try that yet?
__________________
Sold: 2015 ZL1 M6, Rotofab Intake, LS3 throttle body, 2.55 Upper/9.17 Lower, Custom Camshaft, DMS Reinforced Brick, ID1050X, 1 7/8" Headers, ProSpeed HX/Reservoir, DSX Aux Pump/Flex Fuel Sensor, E85, McLeod RXT, BMR 1" Drop, 680rw 93/750rw E85, Tuned by CSP
Sold: 2010 2SS, some bolt ons, 415rwhp/400rwtq |
|
|
|
|
|
#1046 |
![]() Drives: 2012 1LS Join Date: Oct 2013
Location: Leander, TX
Posts: 257
|
I haven't had any problems with 512. I can't tell you about the memory and ability to be changed.
__________________
2012 1LS, Cold Air Inductions CAI, Apex scoop, Apex water bottle relocation, VMax Ported TB, Vitesse Throttle Controller, BMR Sway bars, BMR 1.2" drop springs, Koni rear shocks, Elite catch can, Solo Performance V6 Mach X-LFX Cat-Back Exhaust, Hex Vents, 1LE strut tower brace, Barton short throw, separate clutch reservoir, American Racing TORQ THRUST M 18X9, HiTS radio with reverse camera, GM Blade Dovetail spoiler, 2010 leather wrap steering wheel, vented engine cover, added Homelink to overhead console.
|
|
|
|
|
|
#1047 | |
![]() Drives: 2015 1SS Join Date: Sep 2012
Location: Jax, Fl
Posts: 189
|
Quote:
I should also point out, this upgrade does not have the OBD/BT fix in it. I have that around somewhere, but it was a smaller patch. Should still be on the website so dont be alarmed if all of a sudden the OBD/BT isnt working, this was the original update. Also, radio presets don't show, but once you touch the button it populates. I have a 512 system and asked for a fix way back when, but nothing since. |
|
|
|
|
|
|
#1048 |
![]() Drives: Suzuki Grand Vitara Join Date: May 2014
Location: Malaysia
Posts: 5
|
i have the 4.0 system. however, am unable to get the screen working after switching off the car. radio/dvd works as music is playing but screen stays blank. needed to reset the system manually then reconfigure the whole system.
any help in the date & time? as its a pain to set it everytime i reset the system. did set the acc hold to 2 hours tho. but if this is an issue, then whats the point of having the system to startup everytime the car is started.. btw, i'm not driving a camaro.. only have the same HICES system.. |
|
|
|
|
|
#1049 |
|
Dyno Show Queen LOL
Drives: 16 SS & 17 ZL1 Both Yellow Join Date: Jan 2014
Location: Houston
Posts: 4,354
|
Got a hold of the company in China since I do a lot of business with them, they can't sell directly to USA market for there is all ready a retailer here. But I can have them shipped to Shenzen or HK to companies tha I do business with all ready that will ship to me..
This is a quote and I didn't do any negotiations yet.. this isn't my market so I wouldn't have a clue if price is ok or not.. just thought I let yall know I could order some if the USA retailer is to high. |
|
|
|
|
|
#1050 |
![]() |
Broken pic
Sent from my MB855 using Tapatalk 2
__________________
________________________________
2012 2LS Performance Mods: VMAX PTB, Vitesse Throttle Control, Cold Air Inductions CAI, Engine Bay: Camaro Oil Dip Stick Handle Cover Internal Mods: Hurst Automatic Shifter Plate, GM 4-Pack Gauges Cluster Kit, External Mods: 22" wheels |
|
|
|
|
|
|
|
![]() |
|
|