650 rwhp which clutch

[CyberPredator]

Originally Posted by PlatinumIce

I am thinking about getting ZR1 twin disc clutch with a billet flywheel for my car. also get a spacer and install clutch release spring.

don't do that

[CyberPredator]

Originally Posted by Robbs1le

So I got the clutch installed at a local shop great guys. The clutch is amazing in every way except one and I'm wondering if this is because of install or natural. At idle in neutral it makes light rattling noise when I push in a little on the clutch pedal it goes away quickly. We did not replace slave cylinder as it only had 3500 miles on it. Does anyone believe that could be the cause of this noise? Also does anyone that has one of these amazing clutches have the same noise?? Would love some feedback from people that have this clutch! Thank you for your help! Also it's blue and all the pics on the forms the clutch is green probably just a newer color?

I have the triple and it has a real light noise when you push the clutch down. That chatter is very common with multi-disc clutches and lightweight flywheels in general, but it is true that some don't produce the sound and then some are much louder.

[CyberPredator]

Originally Posted by Whezzy

At what power level (rwhp) do you switch to auto?

Up to you. As far as 1/4 mile runs go you will see advantages from autos when making power. If you are talking about the strength of the transmission the manuals are quite strong.

[Robbs1le]

Originally Posted by CyberPredator

I have the triple and it has a real light noise when you push the clutch down. That chatter is very common with multi-disc clutches and lightweight flywheels in general, but it is true that some don't produce the sound and then some are much louder.

Mine has no noise when you push it only when in neutral at idle or low rpm first or second gear with the pedal out

[fif_gen_powa]

Originally Posted by CyberPredator

Up to you. As far as 1/4 mile runs go you will see advantages from autos when making power. If you are talking about the strength of the transmission the manuals are quite strong.

The problem is pretty much everything else down the line after the transmission

[CyberPredator]

Originally Posted by Robbs1le

Mine has no noise when you push it only when in neutral at idle or low rpm first or second gear with the pedal out

call H-E and see what he says.

Originally Posted by jdubzzz44

The problem is pretty much everything else down the line after the transmission

Amen lol