Lethal Racing "Night Fury" Cam 485hp/446tq - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

RS Speedriver · 02-21-2016, 12:29 AM

join the club lol

mar10 · 02-21-2016, 09:41 AM

Quote:

Originally Posted by nvldojr

NEED HELP! i want this cam. have a stock LS3. but want to know what else i should get to support it? or if i even need to get them. new valve springs? push rods? new lifters? heads? heard stock heads are good.

Contact Brian Tooley racing they'll set you up. Pushrods and springs are a must. I also replaced my cam sprocket and timing chain + various gaskets. A lot of people upgrade their oil pump while in there. There are several threads on what to upgrade while installing a new cam. Or your installer should know, if they don't find another shop.

Sanaabriamartin1991 · 11-05-2016, 09:18 PM

I have a 2011 ls3 m6 camaro has night fury cam and ls7 lifters
And tsp long 2 inch headers deleted cats and everything else is
Stock my tuner was only able to get me 445 hp and 417 tq do you guys think i got what i was suppose to for this cam

RealQuick · 11-05-2016, 11:42 PM

Quote:

Originally Posted by Sanaabriamartin1991

I have a 2011 ls3 m6 camaro has night fury cam and ls7 lifters
And tsp long 2 inch headers deleted cats and everything else is
Stock my tuner was only able to get me 445 hp and 417 tq do you guys think i got what i was suppose to for this cam

Dyno is a tuning tool, so numbers are irrelevant unless you have baseline numbers on the same dyno. What kind of dyno was it?

Sanaabriamartin1991 · 11-06-2016, 01:52 AM

Quote:

Originally Posted by RealQuick

Dyno is a tuning tool, so numbers are irrelevant unless you have baseline numbers on the same dyno. What kind of dyno was it?

Dyno jet at dyno edge in albuquerque nm

Fabio11 · 11-06-2016, 07:02 AM

I have a 2011 camaro ss and i been wanting to cam it but i really dont know about cars that much. Its an automatic from what i understand it has a L99 so do i have to convert it into a LS3 and then actually cam it?

62nalide · 11-08-2016, 09:30 PM

Quote:

Originally Posted by Fabio11

I have a 2011 camaro ss and i been wanting to cam it but i really dont know about cars that much. Its an automatic from what i understand it has a L99 so do i have to convert it into a LS3 and then actually cam it?

GPI VVT cams is what you need don't do the LS3 conversion

G701LE · 11-09-2016, 02:20 PM

Wondering what that cam would make with an L99?

FKNGRSY · 11-09-2016, 06:17 PM

Dropped my car off at the tuners today. Pretty excited to see what it makes. 2014 m6 SS, 30 000 KM's on it.

LR Night fury cam, Kooks catless 1 7/8, NPP Exhaust, Z28 Cold air intake, BTR springs/retainers/pushrods, Comp trunnion upgrade, Melling pump, Katech c5r chain, Moroso catch can, ARP everything 4.11 rear end.

Anything north of 470RWHP would be amazing, I think the NPP and Z28 cai might limit me a bit

micdriver · 04-05-2017, 08:28 PM

What dyno was used to get these numbers?

Bo White · 04-05-2017, 08:57 PM

They had a Dynocom. The one that was local to me put down simular #s as the local Dynojets.

11-06-2016, 07:02 AM	#104
Fabio11 Drives: 2011 Camaro ss Join Date: Nov 2016 Location: Texas Posts: 1	2011 camaro ss I have a 2011 camaro ss and i been wanting to cam it but i really dont know about cars that much. Its an automatic from what i understand it has a L99 so do i have to convert it into a LS3 and then actually cam it?

11-09-2016, 02:20 PM	#106
G701LE Drives: 2010 2SS/RS L99 IBM silver stipes Join Date: Dec 2015 Location: K.C. Kansas Posts: 1,329 View My Garage	Wondering what that cam would make with an L99? __________________ 2010 Imperial Blue w/ Silver stripes 2SS/RS L99 Mods = Not enough....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My Camaro went home to Oshawa to die......	Huggerorange73	5th Gen Camaro SS LS LT General Discussions	753	08-30-2011 03:40 PM
MTI Racing 500ci Dominator Engine Assembly	MTI Racing	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	2	08-27-2009 11:59 AM
Stage 2 cam + American Racing + Corsa = 470 rwhp video!	ChucksTuning	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	37	07-18-2009 03:04 PM
Tom Henry Racing Announces a Special Edition 2010 Camaro!	TAG UR IT	5th Gen Camaro SS LS LT General Discussions	72	04-30-2009 01:57 PM

02-21-2016, 12:29 AM	#99
RS Speedriver Drives: 2018 camaro 1ss 1LE Join Date: Apr 2013 Location: B.C. Pitt Meadows Posts: 305 View My Garage	join the club lol

11-05-2016, 09:18 PM	#101
Sanaabriamartin1991 Drives: 2011 ls3 camaro silver ice Join Date: Oct 2016 Location: Albuquerque nm Posts: 6	I have a 2011 ls3 m6 camaro has night fury cam and ls7 lifters And tsp long 2 inch headers deleted cats and everything else is Stock my tuner was only able to get me 445 hp and 417 tq do you guys think i got what i was suppose to for this cam

11-09-2016, 06:17 PM	#107
FKNGRSY Drives: 2014 1SS Join Date: May 2014 Location: Canada Posts: 158	Dropped my car off at the tuners today. Pretty excited to see what it makes. 2014 m6 SS, 30 000 KM's on it. LR Night fury cam, Kooks catless 1 7/8, NPP Exhaust, Z28 Cold air intake, BTR springs/retainers/pushrods, Comp trunnion upgrade, Melling pump, Katech c5r chain, Moroso catch can, ARP everything 4.11 rear end. Anything north of 470RWHP would be amazing, I think the NPP and Z28 cai might limit me a bit

04-05-2017, 08:28 PM	#108
micdriver Drives: 2014 camaro 1LE Join Date: Feb 2017 Location: Canada Posts: 14 View My Garage	What dyno was used to get these numbers?

04-05-2017, 08:57 PM	#109
Bo White Drives: 2015 Summit White 2SS 1LE Join Date: Feb 2012 Location: Vance Alabama Posts: 8,090	They had a Dynocom. The one that was local to me put down simular #s as the local Dynojets.