HUD for the 2010 Camaro Owners????? - Page 8 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

SummoneR · 07-23-2010, 12:38 PM

Quote:

Originally Posted by strauchpete

Not sure if this has been said but the under dash already has the cut out and mounting for the factory HUD
]

We have seen there is room, but not that the dash is formed and has the ability for the HUD to be mounted. This is good news.

atlang3lo · 07-25-2010, 07:06 AM

hummm......

2SSRS@Gen5diy · 07-26-2010, 07:30 PM

Got the new harness today from GM, I know it was not a full harness but need it to make the prototype, Got home late today will wire it up and post some pics of that after work Tuesday.

Here are 2 pics of all the parts that i got for now.

MacTruck · 07-27-2010, 08:32 AM

Hey 2SSRS I have a question for you. Does your car have backup sensors? I am wondering if the early production models without sensors are different than the ones with sensors. I have sensors and am hoping the harness is in the back and ready for HUD.

2SSRS@Gen5diy · 07-27-2010, 10:37 AM

No my car dos not have backup sensors, It i good idea to look, let us know if the connectors are on the car, I know i helped 8 members install ABL in there dash some time back but don't remember if any had the backup sensors.

BlueStreak · 08-06-2010, 05:22 PM

I wonder what the latest is on this. I love the HUD in my Grand Prix GXP.

2SSRS@Gen5diy · 08-07-2010, 11:47 AM

Quote:

Originally Posted by BlueStreak

I wonder what the latest is on this. I love the HUD in my Grand Prix GXP.

The latest is i made a Harness for the mod, But GM has not released the HUD unit or the trim.

And i add the switch to the dash.

And in the dash.

HBMike · 08-09-2010, 11:19 AM

eagerly awaiting the results of this one!

Phase V · 08-09-2010, 11:46 AM

this is beginning to look very promising. I'm so getting one for my birthday if it's not too expensive

monstertodd · 08-09-2010, 12:26 PM

2SSRS,

Hey how did you secure the HUD switch once you made the hole? Is it just wedged in there?

2SSRS@Gen5diy · 08-09-2010, 12:50 PM

Quote:

Originally Posted by monstertodd

2SSRS,

Hey how did you secure the HUD switch once you made the hole? Is it just wedged in there?

Yes there are 3 metal tab's on the switch that are spring's all you do is cut the dash, I left 1/8 of the flat part at first, Its not hard and if you pull out you head light switch and copy the cut on the outer side.

There are no bolts holding in place it pull's right out.

5thGenIndy500 · 08-12-2010, 10:47 PM

Quote:

Originally Posted by SummoneR

Yup I've heard a guy in here who makes kits for the Vette and it runs $375. I have been told the new windshield is a rumor. I am holding off on replacing mine until I know for sure.

While at the GM Nationals I was standing next to the Camaro engineer when someone asked him if a 2010 could be fitted with HID, part of his reply was that you would need a HID windshield. Guess that's as straight from the horse’s mouth as it gets.

SummoneR · 08-12-2010, 10:57 PM

Quote:

Originally Posted by 5thGenIndy500

While at the GM Nationals I was standing next to the Camaro engineer when someone asked him if a 2010 could be fitted with HID, part of his reply was that you would need a HID windshield. Guess that's as straight from the horse’s mouth as it gets.

Yup, but I will wait to see if the HUD can be done for sure before I get it still.
a HID windshield huh? WOW nice.

Rogue Leader · 08-13-2010, 10:24 AM

Quote:

Originally Posted by 5thGenIndy500

While at the GM Nationals I was standing next to the Camaro engineer when someone asked him if a 2010 could be fitted with HID, part of his reply was that you would need a HID windshield. Guess that's as straight from the horse’s mouth as it gets.

This is correct, the windshield is not a rumor, it comes on those equipped cars. but we will say again, it WILL WORK WITHOUT IT. It just doesn't work as well, it loses some definition and clarity, but it works. The Vette guys have proven this for 10 years.

07-26-2010, 07:30 PM	#101
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	Got the new harness today from GM, I know it was not a full harness but need it to make the prototype, Got home late today will wire it up and post some pics of that after work Tuesday. Here are 2 pics of all the parts that i got for now. Attached Images

07-27-2010, 08:32 AM	#102
MacTruck Drives: Camaro RS Join Date: Oct 2009 Location: Colorado Posts: 318	Hey 2SSRS I have a question for you. Does your car have backup sensors? I am wondering if the early production models without sensors are different than the ones with sensors. I have sensors and am hoping the harness is in the back and ready for HUD. __________________ Soon - Camaro Black 1SS/RS Convertible Piece of Crap Toyota Tundra 4x4 CREWMAX SR5 5.7L Yeah, I'm 7yrs old

08-09-2010, 11:19 AM	#106
HBMike Drives: 2010 Synergy Green HBR Join Date: Aug 2010 Location: Irvine Posts: 103 View My Garage	eagerly awaiting the results of this one! __________________ Wilwood 6 Pistons -Magnaflow X-Cat back - CDC Havoc Styling - TSW Wheels - Roadwire Custom Green Leather Interior - Hotchkis Race Suspension - Whiteline Flatout - KW V3 Suspension - 3M Wraps - Toyo Tires - IPF Supercharger - Vortech V3 - Airaid Filters

08-09-2010, 11:46 AM	#107
Phase V Summer Drives: 2010 2SS/RS IOM w/ Black Stripes Join Date: May 2009 Location: San Angelo, Texas Posts: 423 View My Garage	this is beginning to look very promising. I'm so getting one for my birthday if it's not too expensive __________________ CAI intake, Rotofab W/W Reservoir, Hurst Shifter, Skip-Shift Eliminator AAC lighting, Kooks LT headers w/ high flow cats and Borla ATAK cat-back Restoring or need parts for a Chevy. Look no further than Don's East Coast Restorations

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 10:27 PM
Ambient lighting (ABL) - the FINAL update = LIMITED TO DOOR PANELS	CamaroScotty	5th Gen Camaro SS LS LT General Discussions	338	04-15-2009 06:33 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 07:56 PM

07-25-2010, 07:06 AM	#100
atlang3lo Drives: 2010 Chevy Camaro LS All Black Join Date: May 2010 Location: Kennesaw Posts: 210 View My Garage	hummm......

07-27-2010, 10:37 AM	#103
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,728 View My Garage	No my car dos not have backup sensors, It i good idea to look, let us know if the connectors are on the car, I know i helped 8 members install ABL in there dash some time back but don't remember if any had the backup sensors.

08-06-2010, 05:22 PM	#104
BlueStreak Drives: 1999 TA LS1 Join Date: Jan 2008 Location: Motor City Posts: 15	I wonder what the latest is on this. I love the HUD in my Grand Prix GXP.

08-09-2010, 12:26 PM	#108
monstertodd Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 4,032 View My Garage	2SSRS, Hey how did you secure the HUD switch once you made the hole? Is it just wedged in there?