Treasure Coast Camaro 5 ***TCC5*** - Page 80 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Jaime068 · 08-16-2011, 11:38 PM

Quote:

Originally Posted by Drago77

Id say a good 20.... we had some new members show at PBIR and I'm hoping they all come out...
So far I think the most at any single meet was 18 cars

Hmm we need to go above 18 lol.......BTW Kev how'd it go for you doing the tail light smoke vinyls? After seeing how great the side markers came out today I wanna smoke out the rear lol.

Drago77 · 08-16-2011, 11:53 PM

Quote:

Originally Posted by Jaime068

Hmm we need to go above 18 lol.......BTW Kev how'd it go for you doing the tail light smoke vinyls? After seeing how great the side markers came out today I wanna smoke out the rear lol.

It was a pain... if I had to do it again, id recommend removing the chrome bezel around them- it just snaps out... we pulled Dominicks when we did his lights....that woulda made it easier.

The inside ones are fine, its the outside that gets tricky as there's a pretty good curve to them. Don't really notice it until you try making a flat piece of tint curve without bubbling, lol! Patience, and a good heat gun/hair dryer are definitely your friend! The place I got mine sent me an extra outer piece, just in case....and I needed it! Honestly, your better off painting them. Mike (at Advanced Automotive) would probably do it between $20-40... about double the price of a good tint kit, but worth it for the final look, IMO. He'll be redoing mine eventually

Jaime068 · 08-16-2011, 11:55 PM

Quote:

Originally Posted by Drago77

It was a pain... if I had to do it again, id recommend removing the chrome bezel around them- it just snaps out... we pulled Dominicks when we did his lights....that woulda made it easier.

The inside ones are fine, its the outside that gets tricky as there's a pretty good curve to them. Don't really notice it until you try making a flat piece of tint curve without bubbling, lol! Patience, and a good heat gun/hair dryer are definitely your friend! The place I got mine sent me an extra outer piece, just in case....and I needed it! Honestly, your better off painting them. Mike (at Advanced Automotive) would probably do it between $20-40... about double the price of a good tint kit, but worth it for the final look, IMO. He'll be redoing mine eventually

Hmmm let me know how the paint goes and I might go that route....After smoking out my side markers and reverse lights the tailights look like they could use some smoking too lol.

Jaime068 · 08-17-2011, 12:06 AM

Smoked out side markers, black gills, black chevy bowtie center cap inserts, and both front and rear bowties are blacked out too but just aren't visible in the pic lol....I'm getting addicted to modding

FLRS · 08-17-2011, 04:16 AM

Quote:

Originally Posted by Jaime068

Smoked out side markers, black gills, black chevy bowtie center cap inserts, and both front and rear bowties are blacked out too but just aren't visible in the pic lol....I'm getting addicted to modding

Jaime, It looks good.

Drago77 · 08-17-2011, 09:11 AM

Looks good! I've been concidering going back to my stock center caps and doing the same, I really like the blacked out bowties on there

Jaime068 · 08-17-2011, 02:29 PM

Quote:

Originally Posted by Drago77

Looks good! I've been concidering going back to my stock center caps and doing the same, I really like the blacked out bowties on there

You should do it! I think it would match perfectly with your rims.

Drago77 · 08-17-2011, 06:34 PM

Quote:

Originally Posted by Jaime068

You should do it! I think it would match perfectly with your rims.

My only question is whether the "midnight silver" will match the polished steel on my rims....that's the only reason I didn't do it from the start

baby02 · 08-17-2011, 07:22 PM

Sweet, jaime.

Jaime068 · 08-17-2011, 10:02 PM

Quote:

Originally Posted by Drago77

My only question is whether the "midnight silver" will match the polished steel on my rims....that's the only reason I didn't do it from the start

True

....hmm swap with someone who has polished

cleanwhiteSS · 08-18-2011, 11:41 AM

Looks Good!!

Quote:

Originally Posted by Jaime068

Smoked out side markers, black gills, black chevy bowtie center cap inserts, and both front and rear bowties are blacked out too but just aren't visible in the pic lol....I'm getting addicted to modding

cleanwhiteSS · 08-18-2011, 12:32 PM

Finally Blacked out the bowtie. Thank you Chris from The Drivers Seat in Stuart.

Jaime068 · 08-18-2011, 04:25 PM

looks good doug! Just need to smoke out the reverse lights and i need to smoke out my tail lights hahaha

FLRS · 08-18-2011, 04:52 PM

Looking good Doug.

08-17-2011, 12:06 AM	#1110
Jaime068 Treasure Coast Camaro 5 Drives: 2010 Camaro 1LT/RS RJT Join Date: Aug 2010 Location: Fort Pierce, Florida Posts: 1,317 View My Garage	Smoked out side markers, black gills, black chevy bowtie center cap inserts, and both front and rear bowties are blacked out too but just aren't visible in the pic lol....I'm getting addicted to modding __________________

08-17-2011, 09:11 AM	#1112
Drago77 Treasure Coast Camaro 5 Drives: 19 2SS vert, Mosaic Blk, A10 Join Date: Feb 2009 Location: Stuart, Florida Posts: 4,562 View My Garage	Looks good! I've been concidering going back to my stock center caps and doing the same, I really like the blacked out bowties on there __________________ My build:http://www.camaro5.com/forums/showthread.php?t=132722 http://www.treasurecoastcamaro5.com

08-17-2011, 07:22 PM	#1115
baby02 EYE CANDY Drives: 1SS RS ABM Join Date: Aug 2009 Location: Port St Lucie, fl Posts: 673 View My Garage	Sweet, jaime. __________________ [SIGPIC]BMR springs/sways,CAI,SCT,Razzi, silver stripes, painted calipers, upgraded audio, Katzskin interior upgrades, 22" Lexani, SSW Headers and cats, MBRP 3" catback, gauges, CF wrapped lip spoiler and rear trunk insert, custom rotor and upgraded brake pads, side markers

08-18-2011, 12:32 PM	#1118
cleanwhiteSS 2011 White Camaro RS/2SS Drives: 2011 White Camaro RS/2SS Join Date: Apr 2011 Location: Florida Posts: 276 View My Garage	Bowtie Finally Blacked out the bowtie. Thank you Chris from The Drivers Seat in Stuart. Attached Images

08-18-2011, 04:25 PM	#1119
Jaime068 Treasure Coast Camaro 5 Drives: 2010 Camaro 1LT/RS RJT Join Date: Aug 2010 Location: Fort Pierce, Florida Posts: 1,317 View My Garage	looks good doug! Just need to smoke out the reverse lights and i need to smoke out my tail lights hahaha __________________

08-18-2011, 04:52 PM	#1120
FLRS Drives: 2011 1LT/RS Join Date: Apr 2011 Location: Port St Lucie, FL Posts: 609	Looking good Doug. __________________ Gibson Axle Back - K&N Typhoon CAI - CFD Tap Shifter w/ Hurst Plate - Oracle Color Shift 2.0 - Oil Catch Can

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Transcript of Camaro ZL1 Q&A Webchat with Chevrolet	Tran	Camaro ZL1 Forum - ZL1 Specific Topics	42	12-22-2017 05:42 AM
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	151	05-07-2015 06:52 PM
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 10:27 PM
SEMA Show 2010 - New Camaro Products Showcase - pictures & descriptions!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	59	06-23-2011 01:56 PM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 08:33 PM