Pumpkin [COTW 12/5/11] - Page 81 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Merc · 01-20-2012, 09:03 AM

Quote:

Originally Posted by GTAHVIT

Nice Merc!

Geting there slow but sure.

Merc · 01-20-2012, 09:04 AM

Quote:

Originally Posted by garcmol

Awesome!

Thought I saw a rear diff in here somewhere.........

Yes Sir.

Merc · 01-20-2012, 09:25 AM

I'll be watching the weather and Fedex tracking to see if diff cover makes to Sumas today. Still stuck in Oregon right now. Work til 4pm, so will see how it goes. If it arrives and the roads are decent, I might go for it. That's a pretty big if though.

Merc · 01-20-2012, 08:34 PM

I managed to go south for a few minutes after work today to pick-up the very last piece of the diff puzzle.

Let's hope it does not spew diff fuid out the vent.

Apparently the X stamped in the cover by the vent is the good model.

*GTAHVIT* · 01-20-2012, 11:45 PM

Merc · 01-21-2012, 09:40 AM

Quote:

Originally Posted by GTAHVIT

Diff will be collecting dust now until late March or early April til I install it.:( Will have pic's up of installation and hopefully Pfadt coilovers and DBA rotors at the same time.

MANNYS2SS/RS · 01-21-2012, 11:58 AM

The Diff is looking good and thank you for your help reference the installation of the rear axle seals. luck on your new mod's

Merc · 01-21-2012, 11:08 PM

Quote:

Originally Posted by MANNYS2SS/RS

The Diff is looking good and thank you for your help reference the installation of the rear axle seals. luck on your new mod's

No problem. Glad I could help.

Merc · 01-23-2012, 07:27 PM

Got my diff back today.

Techy Troy who built it, put the finishing touchs on it today.

Big Thanks from Bob's Driveline Service for a quality piece.

Merc · 01-25-2012, 07:46 PM

I was kind of bored at the shop yesterday and found some parts to make some custom tap handles.

*SSE 4 2SS* · 01-25-2012, 08:01 PM

Quote:

Originally Posted by Mercuryman

I was kind of bored at the shop yesterday and found a parts to make some custom tap handles.

You are the mostest gearhead I may have ever known... Only a supergearhead would make a beer tap handle out of a connecting rod... and a good one at that...

*GTAHVIT* · 01-25-2012, 09:27 PM

that's awesome!

Merc · 01-26-2012, 09:04 AM

Quote:

Originally Posted by SSE 4 2SS

You are the mostest gearhead I may have ever known... Only a supergearhead would make a beer tap handle out of a connecting rod... and a good one at that...

Was a good one, 25 pass's and there junk. After 25 your flirtin with disaster. Did you like the Lenco forward, reverse lever?

Merc · 01-26-2012, 09:07 AM

Quote:

Originally Posted by GTAHVIT

that's awesome!

I think next time I'm bored I'll drill and tap the big end and put a piston on it.

01-20-2012, 09:25 AM	#1123
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	I'll be watching the weather and Fedex tracking to see if diff cover makes to Sumas today. Still stuck in Oregon right now. Work til 4pm, so will see how it goes. If it arrives and the roads are decent, I might go for it. That's a pretty big if though. __________________ My Build Thread

01-20-2012, 08:34 PM	#1124
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	I managed to go south for a few minutes after work today to pick-up the very last piece of the diff puzzle. Let's hope it does not spew diff fuid out the vent. Apparently the X stamped in the cover by the vent is the good model. Attached Images __________________ My Build Thread

01-20-2012, 11:45 PM	#1125
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	__________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

01-21-2012, 11:58 AM	#1127
MANNYS2SS/RS Drives: 2010 Camaro 2SS/RS,LS3 Join Date: Oct 2010 Location: South Florida Posts: 1,237	The Diff is looking good and thank you for your help reference the installation of the rear axle seals. luck on your new mod's __________________ LS-3, ProCharger D1SC 665. rwhp /562. rwtq @ 9.3 psi

01-23-2012, 07:27 PM	#1129
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	Got my diff back today. Techy Troy who built it, put the finishing touchs on it today. Big Thanks from Bob's Driveline Service for a quality piece. Attached Images __________________ My Build Thread Last edited by Merc; 02-12-2012 at 08:26 PM.

01-25-2012, 07:46 PM	#1130
Merc In The Circle Drives: 2010 Camaro 2SSRS IOM M6 Join Date: May 2009 Location: Abbotsford BC Canada Posts: 11,310	I was kind of bored at the shop yesterday and found some parts to make some custom tap handles. Attached Images __________________ My Build Thread Last edited by Merc; 01-26-2012 at 09:00 AM.

01-25-2012, 09:27 PM	#1132
GTAHVIT Blessed Drives: 2013 Sonic RS MT Join Date: Dec 2007 Location: Saint Augustine FL Posts: 28,441 View My Garage	that's awesome! __________________ Click image to see build thread. PQ - "the love of cars. It's a boys first step toward manhood and a mans last hold on boyhood." Fbodfather - "We do not want to use the Z28 moniker on a car that does not deserve this hallowed name." The_Blur - "Let's not confuse competitors with equals."

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Can ring and pinion be installed w/ pumpkin in car?	GMRULZ	V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)	2	01-19-2011 08:33 PM
Pumpkin Fixed	Merc	Canada	12	10-24-2010 09:38 PM
Nekoosa Pumpkin Fest	blackgoldhtr	USA - Great Lakes	1	10-14-2010 09:18 PM
Pumpkin Gets Signed	Merc	Canada	9	09-04-2010 12:12 AM
Pumpkin is moving to the city	Noah	5th Gen Camaro SS LS LT General Discussions	0	11-27-2009 02:12 PM