What if I told you that all Pfadt parts were not gone for good? - Page 9 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Apex Motorsports · 06-03-2014, 03:24 PM

Quote:

Originally Posted by 13InfernoSS2

Chase, that is awesome! I did not get a chance to put any Phadt products on my car. Do you or will you have the adjustable coilovers?

No, the coil overs are not coming back. Check out RideTech. They make a great set of coil overs. I am getting ready to install a set on my car.

Quote:

Originally Posted by OK2DRUL

How much longer is the wait time on the ZL spec sway bars?

Not sure.

2012LS3VERT · 06-03-2014, 03:42 PM

Quote:

Originally Posted by bannonm

Aw come on. I asked first.

I may be able to accommodate everyone. I started development today. Just keep checking back, if all goes well Apex will be selling these also

fly2hip8 · 06-09-2014, 12:59 AM

So, my wife might be getting the sways and cradle bushing for christmas this year. And if i'm putting those on, i might as well get the trailing arms and toe rods at the same time! So, will they all be out by then? And, are they going to be around the same price?

Thank you,

Apex Motorsports · 06-09-2014, 06:51 AM

Quote:

Originally Posted by fly2hip8

So, my wife might be getting the sways and cradle bushing for christmas this year. And if i'm putting those on, i might as well get the trailing arms and toe rods at the same time! So, will they all be out by then? And, are they going to be around the same price?

Thank you,

We will see.

RaySouth · 06-10-2014, 07:03 AM

We are leaning towards keeping them in that signature Pfadt orange but are open to suggestions.[/QUOTE]

I would put my 2 cents in for silver or black. I personally loved the ZL1 sway bar specs, but hated the orange, and many did not buy due to color.

Orange does not go with CRT, or Red, so you are cutting potential buyers out just because they are orange. Silver matches pfadt springs offered by Apex, and goes with all cars. Silver or Black blends as well, and will not take away from under vehicle appearance if showing vehicle. Or you could offer them raw as previously suggested allowing consumer to treat as they see fit with the color of their choice.

Ray South

fly2hip8 · 06-10-2014, 07:25 AM

Personally, I love the orange color.

Also, would the trailing arms and toe rods match the color of the bushings, whatever color they end up being?

Apex Motorsports · 06-10-2014, 08:08 AM

I dropped the rear cradle bushings off to be anodized last week. They will be orange.

RaySouth · 06-10-2014, 04:22 PM

I was referring to the sway bars in my post. The original pfadt sways I had looked at had the outside anodized in orange. I know some liked orange, but I bet most would choose a different color when given a choice. I just bought the Pfadt springs from Apex, but will look elsewhere for the solid suspension mounts if they are orange. Still hope the ZL spec sway bars will silver or black, and not orange.

fly2hip8 · 06-10-2014, 05:38 PM

I thought the pfadt sways were black? The zl spec ones anyways.

Apex Motorsports · 06-10-2014, 07:38 PM

Quote:

Originally Posted by RaySouth

I was referring to the sway bars in my post. The original pfadt sways I had looked at had the outside anodized in orange. I know some liked orange, but I bet most would choose a different color when given a choice. I just bought the Pfadt springs from Apex, but will look elsewhere for the solid suspension mounts if they are orange. Still hope the ZL spec sway bars will silver or black, and not orange.

No, we would never do the sway bars in orange.

Quote:

Originally Posted by fly2hip8

I thought the pfadt sways were black? The zl spec ones anyways.

Not yet.

Denis · 06-17-2014, 08:16 AM

Quote:

Originally Posted by Apex Chase

You never know, you may get another chance.

Macina · 06-17-2014, 10:49 AM

Just installed my 1.25" drop springs this weekend. Im really impressed! I think the ride got alot firmer but also smoother. These springs help alot when the road gets bumpy, feels lile the suspension swallows bumps much better! And the whole car looks great now, so mean and aggressive!

Macina · 06-17-2014, 10:51 AM

Bad picture, but still looking good!
Just a couple of hours after install so I guess it will drop some more.

Big difference!

Apex Motorsports · 06-17-2014, 07:27 PM

Quote:

Originally Posted by Macina

Bad picture, but still looking good!
Just a couple of hours after install so I guess it will drop some more.

Big difference!

Looks great! Congrats!

06-17-2014, 10:49 AM	#124
Macina Drives: 2014 Camaro 2SS/RS 6MT AGM Join Date: Jun 2013 Location: Göteborg, Sweden Posts: 318	Just installed my 1.25" drop springs this weekend. Im really impressed! I think the ride got alot firmer but also smoother. These springs help alot when the road gets bumpy, feels lile the suspension swallows bumps much better! And the whole car looks great now, so mean and aggressive! __________________ 2014 Ashen gray 2SS/RS 6MT, Black rally stripes, Recaros, Sunroof. Mods: OBX 1.7/8" LT headers, No cats, SW retro chambered cat back, CAI inc cai, JRE Scoop, roto-fab wb relo kit, RX catch can, Vmax ported TB, 1LE steering wheel, 1LE shift knob/boot, SCT tuner, Anthracite plasti dipped wheels, Apex/Pfadt 1.25" lowering springs.

06-17-2014, 10:51 AM	#125
Macina Drives: 2014 Camaro 2SS/RS 6MT AGM Join Date: Jun 2013 Location: Göteborg, Sweden Posts: 318	Bad picture, but still looking good! Just a couple of hours after install so I guess it will drop some more. Big difference! __________________ 2014 Ashen gray 2SS/RS 6MT, Black rally stripes, Recaros, Sunroof. Mods: OBX 1.7/8" LT headers, No cats, SW retro chambered cat back, CAI inc cai, JRE Scoop, roto-fab wb relo kit, RX catch can, Vmax ported TB, 1LE steering wheel, 1LE shift knob/boot, SCT tuner, Anthracite plasti dipped wheels, Apex/Pfadt 1.25" lowering springs.

06-09-2014, 12:59 AM	#115
fly2hip8 Drives: 2013 Camaro 2SS Join Date: Aug 2013 Location: Kansas Posts: 342	So, my wife might be getting the sways and cradle bushing for christmas this year. And if i'm putting those on, i might as well get the trailing arms and toe rods at the same time! So, will they all be out by then? And, are they going to be around the same price? Thank you,

06-10-2014, 07:03 AM	#117
RaySouth Drives: 2013 ZL1 CRT Join Date: Oct 2013 Location: Green Bay Posts: 50	We are leaning towards keeping them in that signature Pfadt orange but are open to suggestions.[/QUOTE] I would put my 2 cents in for silver or black. I personally loved the ZL1 sway bar specs, but hated the orange, and many did not buy due to color. Orange does not go with CRT, or Red, so you are cutting potential buyers out just because they are orange. Silver matches pfadt springs offered by Apex, and goes with all cars. Silver or Black blends as well, and will not take away from under vehicle appearance if showing vehicle. Or you could offer them raw as previously suggested allowing consumer to treat as they see fit with the color of their choice. Ray South

06-10-2014, 07:25 AM	#118
fly2hip8 Drives: 2013 Camaro 2SS Join Date: Aug 2013 Location: Kansas Posts: 342	Personally, I love the orange color. Also, would the trailing arms and toe rods match the color of the bushings, whatever color they end up being?

06-10-2014, 08:08 AM	#119
Apex Motorsports Drives: 2000 Camaro SS Join Date: Feb 2010 Location: Louisville, Ky. Posts: 25,165	I dropped the rear cradle bushings off to be anodized last week. They will be orange.

06-10-2014, 04:22 PM	#120
RaySouth Drives: 2013 ZL1 CRT Join Date: Oct 2013 Location: Green Bay Posts: 50	I was referring to the sway bars in my post. The original pfadt sways I had looked at had the outside anodized in orange. I know some liked orange, but I bet most would choose a different color when given a choice. I just bought the Pfadt springs from Apex, but will look elsewhere for the solid suspension mounts if they are orange. Still hope the ZL spec sway bars will silver or black, and not orange.

06-10-2014, 05:38 PM	#121
fly2hip8 Drives: 2013 Camaro 2SS Join Date: Aug 2013 Location: Kansas Posts: 342	I thought the pfadt sways were black? The zl spec ones anyways.