Mace cams ordered. - Page 91 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

lscamaro · 09-12-2013, 08:12 PM

Not 100% sure on that

GasTires&Oil · 09-12-2013, 09:16 PM

Quote:

Originally Posted by BlackoutLFX

well i guess I can enjoy the trifecta tune until the cams go in. , know any good tuners in Alabama? ha ha

There is a shop called Speed South. I don't know much about them personally, but everything I have read has been positive. You could call them up and see if they can do anything for you.

BlackoutLFX · 09-12-2013, 09:25 PM

Quote:

Originally Posted by GasTires&Oil

There is a shop called Speed South. I don't know much about them personally, but everything I have read has been positive. You could call them up and see if they can do anything for you.

Thanks, for the information I will keep this in mind. I know were some dyno's are around here, but not sure the techs would even know what I was talking about....They'd probably ask me where is the carburetor?

MACE_ENG · 09-17-2013, 11:16 PM

Trifecta will likely be able to support these cams in future (until OFFICIAL notice of course). Just additional calibration time in private will need to be allocated such that it's perfected for public release.

Kindest Regards,
Steve

Decepticon21 · 09-18-2013, 07:39 AM

Im so out of the whole loop with this whole cam/programmer thing lately. 51 pages of info on this thread I have yet to get time to go through. All I know is theres a ton of weird stuff going on that isn't making to much sense.

Im scared to load my tune back onto my car from trifecta after I blew the LLT out a couple months ago. I have no idea if part of the cause of it blowing was the trifecta tune or not honestly. Before all this I didn't have any complaints. But something is worrying me to not load trifecta back onto this new LLT motor. :/

KMPrenger · 09-18-2013, 09:06 AM

Quote:

Originally Posted by Decepticon21

Im so out of the whole loop with this whole cam/programmer thing lately. 51 pages of info on this thread I have yet to get time to go through. All I know is theres a ton of weird stuff going on that isn't making to much sense.

Im scared to load my tune back onto my car from trifecta after I blew the LLT out a couple months ago. I have no idea if part of the cause of it blowing was the trifecta tune or not honestly. Before all this I didn't have any complaints. But something is worrying me to not load trifecta back onto this new LLT motor. :/

Then don't do it. Nothing wrong with that.

Also, there is no reason for you to sift through all 51 pages. Just know that basically cam development is still on going and some are trying to work out the mechanics and tuning for them. It seems we are close, but just not there yet.

BlackoutLFX · 09-18-2013, 06:59 PM

Cams Cams Cams Cams! Yes Please. LSD installed today. NOw I have to test out this nytrex 100 shot.

Tulkas · 09-23-2013, 10:42 AM

Hey everyone, been a long time since I last read this thread... How are the cams going? Found a good tune for them yet?
I had come to a stage where the cams and 3.7diff made my car average 18.5L/100km... I was getting a maximum of 400km out of a 73L tank... Unfortunately I have sold my commodore v6 and I have taken the route of vw..for now.
I managed to find the latest short clip of my cammed v6 and would like to share it with everyone.

Enjoy.

lscamaro · 09-23-2013, 12:48 PM

Any new info on the cams? Find a tuner yet?

BlackoutLFX · 09-23-2013, 05:08 PM

Supposed to be ready soon, I have found some tuners, and Trifecta will support tuning these cams. Look on the the thread for the llt.

lscamaro · 09-23-2013, 05:21 PM

This is the thread for the LLT

BlackoutLFX · 09-23-2013, 05:29 PM

oops, I meant LFX Cams?

lscamaro · 09-23-2013, 07:14 PM

Oh yea, I saw that but it's a lot different for the LLT. It all comes down to tuning and if we can't get decent tuners on the cams, there not going to work no matter what happens. You guys with the LFX have the advantage that you can basically buy the cams and go to any shop with hp tuners and efi live and get them tuned.

lscamaro · 09-26-2013, 01:03 PM

Any update?

09-12-2013, 08:12 PM	#1261
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Not 100% sure on that __________________ Click Picture for Build Thread

09-17-2013, 11:16 PM	#1264
MACE_ENG Drives: LLT Machine Join Date: Nov 2011 Location: VIC/AUS Posts: 563	Trifecta will likely be able to support these cams in future (until OFFICIAL notice of course). Just additional calibration time in private will need to be allocated such that it's perfected for public release. Kindest Regards, Steve Last edited by MACE_ENG; 09-18-2013 at 09:04 AM.

09-23-2013, 12:48 PM	#1269
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Any new info on the cams? Find a tuner yet? __________________ Click Picture for Build Thread

09-23-2013, 05:21 PM	#1271
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	This is the thread for the LLT __________________ Click Picture for Build Thread

09-23-2013, 07:14 PM	#1273
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Oh yea, I saw that but it's a lot different for the LLT. It all comes down to tuning and if we can't get decent tuners on the cams, there not going to work no matter what happens. You guys with the LFX have the advantage that you can basically buy the cams and go to any shop with hp tuners and efi live and get them tuned. __________________ Click Picture for Build Thread

09-18-2013, 07:39 AM	#1265
Decepticon21 Drives: 2010 Camaro v6 Join Date: Aug 2012 Location: Barberton, Ohio Posts: 283	Im so out of the whole loop with this whole cam/programmer thing lately. 51 pages of info on this thread I have yet to get time to go through. All I know is theres a ton of weird stuff going on that isn't making to much sense. Im scared to load my tune back onto my car from trifecta after I blew the LLT out a couple months ago. I have no idea if part of the cause of it blowing was the trifecta tune or not honestly. Before all this I didn't have any complaints. But something is worrying me to not load trifecta back onto this new LLT motor. :/

09-18-2013, 06:59 PM	#1267
BlackoutLFX Drives: 2012, Black 2LS Join Date: Jun 2013 Location: Florida Posts: 490 View My Garage	Cams Cams Cams Cams! Yes Please. LSD installed today. NOw I have to test out this nytrex 100 shot.

09-23-2013, 05:08 PM	#1270
BlackoutLFX Drives: 2012, Black 2LS Join Date: Jun 2013 Location: Florida Posts: 490 View My Garage	Supposed to be ready soon, I have found some tuners, and Trifecta will support tuning these cams. Look on the the thread for the llt.

09-23-2013, 05:29 PM	#1272
BlackoutLFX Drives: 2012, Black 2LS Join Date: Jun 2013 Location: Florida Posts: 490 View My Garage	oops, I meant LFX Cams?

09-26-2013, 01:03 PM	#1274
lscamaro Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011 Location: San Antonio, Texas Posts: 10,305	Any update? __________________ Click Picture for Build Thread