09-13-2014, 01:27 AM | #1 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Paint brake calipers on my 2010 Camaro ss
Does anyone know where I can get my brake calipers painted yellow with with the Chevrolet and brembo logos on it. Im In orange county California. Here's some pics of what I mean. And for a reasonable price.
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
09-13-2014, 01:53 AM | #2 |
Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
|
09-13-2014, 02:37 AM | #3 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
Thanks ill email them and I hope they can put both logos on.
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez Last edited by krisprz2010camaross; 09-13-2014 at 02:49 AM. |
09-13-2014, 09:18 AM | #4 |
Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
Or you could always DIY
|
09-13-2014, 10:33 AM | #5 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
I would but I'm not that skilled enough haha
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
09-13-2014, 11:08 AM | #6 |
Drives: 2012 SS/RS Join Date: Jul 2013
Location: Placentia, CA
Posts: 2,130
|
Haha that's what I though, but it's actually pretty easy.
http://http://www.camaro5.com/forums...d.php?t=344735 |
09-13-2014, 11:25 AM | #7 |
Drives: C6 Corvette Join Date: Sep 2013
Location: Tampa, FL
Posts: 1,264
|
Do it yourself. Its wayyy easier than you think. Only a couple hours and you'll be happy you did it yourself. Get the logos off eBay for cheap and the paint from any auto parts store.
__________________
2008 C6 m6. Carbon creations front/rear carbon fiber wodebody fenders. Carbon fiber hood carbon fiber roof hoop carbon fiber zr1 extreme spoiler. NW 102mm tb. Ported intake manifold. Cometic .040 head gaskets. LG motorsports G6x3 cam. DSX flex fuel sensor. AEM methanol kit. Z06 brakes. Ebiach sway bars. ZR1 rep wheels and Nitto Invo tires. Monster stage 3 twin disc clutch. MGW short shifter. Corbeau race seats. Gforce race harnesses. SLP loudmouth 2 mufflers. Carbon fiber exhaust tips. RPM stage 4 transmission and Stage 3 rear diff. 3.73 gears. Vararam cai. Kooks 1 7/8 headers and x-pipe.
|
09-13-2014, 02:35 PM | #8 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
But I want powder coated.
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
09-14-2014, 10:41 AM | #9 |
Bad 45th
Drives: 2012 45th Anniversay Edition SS Join Date: Apr 2014
Location: San Antonio
Posts: 548
|
OP - the ones in your photos aren't powder coated and they look good.
__________________
- Carl
2012 45th Anniversary SS - LS3 Magnuson TVS 2300 Supercharger / Alky Meth Injection / Lingenfelter GT12 Cam / Kooks LT Headers, 3 inch exhaust & QTP electric cut outs / Monster LT1-S Twin Disc Clutch / MGW flat blade short throw shifter / Haltech CAI / VMax Throttle Body / DSS Stage 3 axles/ BMR Trailing Arms, Toe Rods, Suspension Bushing and 1" lowering springs / Taylor 8MM Plug Wires / Tuned by Henderson Performance Technologies / EBC dimpled and sloted rotors / G2 Painted Calipers / GM Tower Strut Brace / ZL1 Factory Rep Wheels |
09-14-2014, 10:50 AM | #10 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
I just did mine yellow a couple weeks ago on a summit white 2010. Think it came out pretty good. Wil post a few pics when I have a chance.
|
09-14-2014, 11:00 AM | #11 |
Drives: 2010 Camaro 2ss/Rs Transformers Join Date: Aug 2014
Location: Yorba Linda, California
Posts: 1,564
|
I've been trying to find someone that can do it but no one can...
__________________
YouTube:Krisprz garage
Insta:kris__perez & krisprz_garage LS3 conversion Vararam intake(tune model) Kooks LT headers & cats delete Corsa ZL1 3" exhaust RedBarn Racing Tune CMS Stage 3 Cam AFR CNC ported heads MSD Spark plug wires LNC-2000 Launch controller NGK TR6 Spark Plugs 1le strut tower brace-TPIS spacers Nick Williams 102mm throttle body Fast lsxr 102 intake manifold Slp 25% UDP Katech Tensioner Pulley Circle D 3600-3700 multi disk Stall GM 3.91 gears DDS carbon fiber driveshaft ZL1 fuel pump & injectors Flex fuel sensor(91/E85) https://wheelwell.com/kris-perez |
09-14-2014, 11:06 AM | #12 |
Drives: 2011 Camaro 2SS/RS Join Date: Dec 2010
Location: CT
Posts: 2,061
|
That link goes nowhere.
|
09-14-2014, 11:08 AM | #13 |
Bad 45th
Drives: 2012 45th Anniversay Edition SS Join Date: Apr 2014
Location: San Antonio
Posts: 548
|
Lots if people do this. I'm actually getting mine ready to do myself and I just helped do a neighbors. He elected spray paint and I'm doing the brush on kit. The decals are ordered on-line.
Sent from my iPhone using Tapatalk
__________________
- Carl
2012 45th Anniversary SS - LS3 Magnuson TVS 2300 Supercharger / Alky Meth Injection / Lingenfelter GT12 Cam / Kooks LT Headers, 3 inch exhaust & QTP electric cut outs / Monster LT1-S Twin Disc Clutch / MGW flat blade short throw shifter / Haltech CAI / VMax Throttle Body / DSS Stage 3 axles/ BMR Trailing Arms, Toe Rods, Suspension Bushing and 1" lowering springs / Taylor 8MM Plug Wires / Tuned by Henderson Performance Technologies / EBC dimpled and sloted rotors / G2 Painted Calipers / GM Tower Strut Brace / ZL1 Factory Rep Wheels |
09-14-2014, 05:22 PM | #14 |
Drives: 2010 2SS/RS Join Date: Jul 2014
Location: Ma
Posts: 476
|
|
|
|
|
|