You are browsing camaro5 
 |
|
04-04-2015, 06:23 PM
|
#1 |
|
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
HELP....
Ok... So I changed the Calipers, Rotors and Brake Lines. I Bled the brakes starting with Passenger Rear inner bleed screw first then outer. Then same process on Driver Rear and then Passenger Front and then driver front. The brakes are spongy....so I bled them again and no air came out. Still spongy. What the hell is going on?
__________________
2010 Camaro 2SS/RS
|
|
|
|
04-04-2015, 08:03 PM
|
#2 |
|
Drives: His Wife Crazy Join Date: Jan 2008
Location: Silas Deane Auto,CT Name: Rob Anderson
Posts: 1,789
|
How are you bleeding them?
|
|
|
|
|
04-04-2015, 10:03 PM
|
#3 |
|
Aim Small...Miss Small
Drives: 2018 ZL1 M6 Join Date: Jun 2012
Location: San Jose, CA
Posts: 866
|
I have a Motive Power Bleeder. So pumping it up to 15 psi and then going to bleed screw and opening it with tube attached and closing it when no more air.
__________________
2010 Camaro 2SS/RS
|
|
|
|
|
|
|
|
 |
|
|
