Atlanta Club Lounge

[CamaroKid300]

No DWS' anywhere for what looks like at least 2-3 weeks.

I'm pretty nervous about driving back to auburn and around there on a $40 used Toyo.

[ZLWonton]

Originally Posted by JMWNERW

Are yours the gen 2 supercars?

What about a trade? My rear 285s have about 400 miles at the moment (no track days).

I have the good year eagle f1s.

[OK2DRUL]

I should have my springs, tie rods, and trailing arms all delivered by the middle of next week. I'm wanting to do the install on Sunday March 23. I don't have all the tools needed to do it up here in Atlanta (I have most, but a list of all tools needed is at the bottom) and I would like some help from someone that's done it before (Jeff, you would be a great help). If anyone is free next Sunday and has a place to help please let me know. If not then we can try to figure out another Sunday. I don't have another weekend day available until after April 15th as it is tax season. Shoot me a PM or comment here if you would like to help. I can grab a case of beer and a couple of pizzas if that makes people want to help!

Tools needed in total are as follows:

1/2 drive breaker-bar

1/2 drive torque wrench

1/4, 3/8, and 1/2 drive ratchets

7mm, 10mm, 15mm shallow sockets

18mm, 21mm, 24mm deep sockets

7mm, 21mm, 24mm wrenches

15mm, 18mm ratchet wrenches

T40, T50 Torx bit sockets

5mm Allen wrench

Razor box knife

Coil spring compressor (can be rented from most auto parts stores)

Floor jack & jackstands, or lift

[SlowSS]

Originally Posted by OK2DRUL

I should have my springs, tie rods, and trailing arms all delivered by the middle of next week. I'm wanting to do the install on Sunday March 23. I don't have all the tools needed to do it up here in Atlanta (I have most, but a list of all tools needed is at the bottom) and I would like some help from someone that's done it before (Jeff, you would be a great help). If anyone is free next Sunday and has a place to help please let me know. If not then we can try to figure out another Sunday. I don't have another weekend day available until after April 15th as it is tax season. Shoot me a PM or comment here if you would like to help. I can grab a case of beer and a couple of pizzas if that makes people want to help!

Tools needed in total are as follows:

1/2 drive breaker-bar

1/2 drive torque wrench

1/4, 3/8, and 1/2 drive ratchets

7mm, 10mm, 15mm shallow sockets

18mm, 21mm, 24mm deep sockets

7mm, 21mm, 24mm wrenches

15mm, 18mm ratchet wrenches

T40, T50 Torx bit sockets

5mm Allen wrench

Razor box knife

Coil spring compressor (can be rented from most auto parts stores)

Floor jack & jackstands, or lift

Hey man if you are willing drive, my buddy and I will do it, but he ain't free lol

He has every tool that we need including the spring compressor. He is free next Sunday.

[mrpyle]

Originally Posted by OK2DRUL

I should have my springs, tie rods, and trailing arms all delivered by the middle of next week. I'm wanting to do the install on Sunday March 23. I don't have all the tools needed to do it up here in Atlanta (I have most, but a list of all tools needed is at the bottom) and I would like some help from someone that's done it before (Jeff, you would be a great help). If anyone is free next Sunday and has a place to help please let me know. If not then we can try to figure out another Sunday. I don't have another weekend day available until after April 15th as it is tax season. Shoot me a PM or comment here if you would like to help. I can grab a case of beer and a couple of pizzas if that makes people want to help!

Tools needed in total are as follows:

1/2 drive breaker-bar

1/2 drive torque wrench

1/4, 3/8, and 1/2 drive ratchets

7mm, 10mm, 15mm shallow sockets

18mm, 21mm, 24mm deep sockets

7mm, 21mm, 24mm wrenches

15mm, 18mm ratchet wrenches

T40, T50 Torx bit sockets

5mm Allen wrench

Razor box knife

Coil spring compressor (can be rented from most auto parts stores)

Floor jack & jackstands, or lift

Can I just come over for the pizza and beer? .... ok ok, I can turn a nut a two.

[SeaCompiler]

Originally Posted by JMWNERW

Need to get in touch with Josh soon to get my springs installed

Dropped my car off at Spartan last weekend for some cam work and other mods. Might be able to pick it up tomorrow!

[Hard Parker]

lsxpert open house in ball ground

who is going?

[4SFEDSS]

Hey guys and gal. Well I didn't find anyone willing to
give me enough money for this bucket of bolts so I
guess I'm going to try pouring more money into this
bottomless pit. Dropped it off last week for another
transmission job (#4) and a couple other things. Hopefully
I'll get it back before the next ACE5 gathering or by
F-Body for sure. Hope to get it running again and see some
of you soon.

[Southern Comfort]

Hate you have to spend more but glad to hear you're sticking around.

[blake2010ss]

Its gonna be a long day In houston...rain rain go away

[OK2DRUL]

Originally Posted by blake2010ss

Its gonna be a long day In houston...rain rain go away

That sucks! Did you get to ride in that Lambo?

[blake2010ss]

Nah... The guy is paying his passenger to record races and photograph so its hard to catch a ride.

[nitto85]

Originally Posted by OK2DRUL

I know Josh at Spartan and Vengenance Racing both do free updates for a year after you get a tune. I'm not sure what all that entails or what they charge after that window.

Thank you, I'll look into it. I've been thinking about changing gears, and I'd hate to pay for a retune just for that unless I could get a deal on another tune in the future if I decide to add more power.
I need to get my ZR1 Map sensor and Wideband hooked up anyway. I hear Vengeance is backed up, but Spartan is kinda far from me.

Also, anyone know of a good sign shop local to Woodstock/Roswell that is good at applying car decals? I want to put some grandsport stripes on that I bought, and I'm not confident that if I do it, they'll be even lol.

[Hard Parker]

Originally Posted by mst504

Thank you, I'll look into it. I've been thinking about changing gears, and I'd hate to pay for a retune just for that unless I could get a deal on another tune in the future if I decide to add more power.
I need to get my ZR1 Map sensor and Wideband hooked up anyway. I hear Vengeance is backed up, but Spartan is kinda far from me.

Also, anyone know of a good sign shop local to Woodstock/Roswell that is good at applying car decals? I want to put some grandsport stripes on that I bought, and I'm not confident that if I do it, they'll be even lol.

I know a guy in cumming who can do it and LSXperts in ball ground does performance upgrades