Cochise County / Sierra Vista Camaros - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

AZBLUDIMN · 12-14-2010, 04:02 AM

The Bisbee Tunnel has been in some movies. This is the south side of the tunnel with me going home to Douglas, AZ.
Name: BLU.JPG
Views: 2156
Size: 115.9 KB

]
Going home after the Toys for Tots in Tucson, AZ on 12-11-10
Merry Christmas and Happy New Year to All!
Hope to meet all at Firebird Raceway in April, 2011

AZSS6SPD · 12-24-2010, 09:45 PM

This was "ZEE." She was with me from 2003 until 2008. She was a 1998 Z28 LS1 with a 6 Spd. I had just installed a Centerforce dual disc clutch; straight pipes; MTI lid and had polyurethane suspension bushings when I an unlicensed driver (illegal alien) pulled in front of me. I had nowhere to go. She stopped 3 feet before the stoplight pole. The bags deployed and was able to catch the driver before he ran away. "ZEE" saved my life. I suffered a snapped left thumb. This is one of the reason that I drive a Camaro!

Name: 3.jpg
Views: 613
Size: 67.0 KB

1st gear 45 mph
2nd gear 80 mph
3rd gear 105 mph
4th gear 130 mph
5th gear 150 mph
6th gear "priceless"

AZSS6SPD · 12-25-2010, 07:19 PM

Name: SSPX0697.jpg
Views: 580
Size: 159.0 KB

It was best to leave the MAF in place until you needed it.

AZSS6SPD · 12-25-2010, 07:28 PM

Name: SSPX0454.jpg
Views: 571
Size: 146.8 KB

Name: SSPX0455.jpg
Views: 565
Size: 158.5 KB

Name: SSPX0459.jpg
Views: 565
Size: 123.0 KB

Name: SSPX0462.jpg
Views: 590
Size: 142.6 KB

I did not want to worry about the sepertine belt catching the line. The preformed factory tube seems to do the job. Going to put some O-ring clamps. I had no vacuum leaks after I was done!

AZSS6SPD · 12-26-2010, 08:05 PM

Name: Charcoal bag.jpg
Views: 580
Size: 86.8 KB

I guess this "little guy" which is attached to the top of the factory air lid has a purpose in keeping your filter nice and dry from humidity. AZ humidity gets pretty high. With the monsoons that we have down here, I'll be installing it inside the Airaid box. I'll be installing it with double sided tape or velcro. Just playing it safe!

AZSS6SPD · 01-15-2011, 08:07 PM

A co-worker bought a 2011 Grand Sport, nice car. I asked him why he had a Camaro engine

. Now, I have to go install his K&N when it comes in

AZSS6SPD · 01-24-2011, 09:06 PM

Name: SSPX0753.jpg
Views: 521
Size: 114.0 KB

Pete took me for a ride afterwards

. Nice Vette

copper3000 · 01-26-2011, 11:51 AM

Nice choice Tony, I went with Airaid too!
Your car sure is sharp. Maria's is too!

Excellent photos!!

copper3000 · 01-26-2011, 11:54 AM

It's so sad to see a beautiful car destroyed... :(

Quote:

Originally Posted by AZSS6SPD

This was "ZEE." She was with me from 2003 until 2008. She was a 1998 Z28 LS1 with a 6 Spd. I had just installed a Centerforce dual disc clutch; straight pipes; MTI lid and had polyurethane suspension bushings when I an unlicensed driver (illegal alien) pulled in front of me. I had nowhere to go. She stopped 3 feet before the stoplight pole. The bags deployed and was able to catch the driver before he ran away. "ZEE" saved my life. I suffered a snapped left thumb. This is one of the reason that I drive a Camaro!

AZSS6SPD · 02-26-2011, 06:06 PM

Name: TOOLS.jpg
Views: 440
Size: 169.8 KB

Billett has great products. I started playing with 1500 grit sandpaper to make it look better. Finer brushing did not look better. I decided to polish the "Camaro" section.

copper3000 · 02-28-2011, 09:45 AM

Wow dude, that looks awesome! Chrome like and you know how I like chrome. Lol...

AZSS6SPD · 03-17-2011, 10:44 PM

I was on I-10 this morning. This fully detailed Challenger pulled in on to I-10. That car was spotless

. He pulled up right behind me. It was nice to see. A "DPS" car was parked on the median when he caught up and flashed his lights.

. I don't think he noticed. He pulled off on the Wilmot exit. It was nice to see! This guy takes care of his Challenger!
Name: chalenger.jpg
Views: 453
Size: 73.7 KB

Name: chalenger.jpg
Views: 453
Size: 73.7 KB

AZSS6SPD · 04-10-2011, 08:59 PM

I got off work @ 4 p.m. and the temp. was a warm 58 degrees

I ended up getting home @ 5:15 p.m.

I have a few days to detail "Ess & Bludimn" before we hit I-10

*mlee* · 04-10-2011, 09:04 PM

WoW... this thread is chocked full of WIN... great pics...

12-14-2010, 04:02 AM	#29
AZBLUDIMN ABM Drives: 1SS Join Date: May 2010 Location: Douglas, AZ Posts: 11 View My Garage	Bisbee Mountains/Tunnel The Bisbee Tunnel has been in some movies. This is the south side of the tunnel with me going home to Douglas, AZ. ] Going home after the Toys for Tots in Tucson, AZ on 12-11-10 Merry Christmas and Happy New Year to All! Hope to meet all at Firebird Raceway in April, 2011 Last edited by AZBLUDIMN; 12-14-2010 at 04:23 AM.

12-24-2010, 09:45 PM	#30
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	REMEMBERING "ZEE" This was "ZEE." She was with me from 2003 until 2008. She was a 1998 Z28 LS1 with a 6 Spd. I had just installed a Centerforce dual disc clutch; straight pipes; MTI lid and had polyurethane suspension bushings when I an unlicensed driver (illegal alien) pulled in front of me. I had nowhere to go. She stopped 3 feet before the stoplight pole. The bags deployed and was able to catch the driver before he ran away. "ZEE" saved my life. I suffered a snapped left thumb. This is one of the reason that I drive a Camaro! 1st gear 45 mph 2nd gear 80 mph 3rd gear 105 mph 4th gear 130 mph 5th gear 150 mph 6th gear "priceless" Last edited by AZSS6SPD; 12-24-2010 at 10:15 PM.

12-25-2010, 07:19 PM	#31
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	AIRAID It was best to leave the MAF in place until you needed it.

12-25-2010, 07:28 PM	#32
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	AIRAID I did not want to worry about the sepertine belt catching the line. The preformed factory tube seems to do the job. Going to put some O-ring clamps. I had no vacuum leaks after I was done!

12-26-2010, 08:05 PM	#33
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	"Charcoal bag" I guess this "little guy" which is attached to the top of the factory air lid has a purpose in keeping your filter nice and dry from humidity. AZ humidity gets pretty high. With the monsoons that we have down here, I'll be installing it inside the Airaid box. I'll be installing it with double sided tape or velcro. Just playing it safe!

01-15-2011, 08:07 PM	#34
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	2011 Corvette A co-worker bought a 2011 Grand Sport, nice car. I asked him why he had a Camaro engine. Now, I have to go install his K&N when it comes in

01-24-2011, 09:06 PM	#35
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	2011 Grand Sport Corvette Pete took me for a ride afterwards. Nice Vette

01-26-2011, 11:51 AM	#36
copper3000 Troy Drives: 2018 ZL1 Camaro Join Date: Oct 2009 Location: Tucson, AZ Posts: 1,405 View My Garage	Nice choice Tony, I went with Airaid too! Your car sure is sharp. Maria's is too! Excellent photos!!

02-26-2011, 06:06 PM	#38
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	Billet Gas Door Billett has great products. I started playing with 1500 grit sandpaper to make it look better. Finer brushing did not look better. I decided to polish the "Camaro" section.

02-28-2011, 09:45 AM	#39
copper3000 Troy Drives: 2018 ZL1 Camaro Join Date: Oct 2009 Location: Tucson, AZ Posts: 1,405 View My Garage	Wow dude, that looks awesome! Chrome like and you know how I like chrome. Lol...

03-17-2011, 10:44 PM	#40
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	I-10 I was on I-10 this morning. This fully detailed Challenger pulled in on to I-10. That car was spotless. He pulled up right behind me. It was nice to see. A "DPS" car was parked on the median when he caught up and flashed his lights.. I don't think he noticed. He pulled off on the Wilmot exit. It was nice to see! This guy takes care of his Challenger!

04-10-2011, 08:59 PM	#41
AZSS6SPD Drives: 2010 1SS (HIS&HERS) Join Date: Mar 2010 Location: Douglas, AZ Posts: 353 View My Garage	I got off work @ 4 p.m. and the temp. was a warm 58 degrees I ended up getting home @ 5:15 p.m. I have a few days to detail "Ess & Bludimn" before we hit I-10

04-10-2011, 09:04 PM	#42
mlee CamaroFans.com Drives: ZLE & ZR2 Join Date: Oct 2008 Location: Conroe, TX Posts: 37,490 View My Garage	WoW... this thread is chocked full of WIN... great pics... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Southeast Alabama and South Georgia meet...	RJT-Maro	USA - Southeast	23	07-13-2010 08:48 PM
Douglas Georgia anyone?...	camaro912	USA - Southeast	1	01-06-2010 06:28 AM
Best Tuner Shop in the Southeast?	Mod4SS	USA - Southeast	1	09-01-2009 12:09 AM
Anyone know of a dealer in the SouthEast with a Silver or Cyber Gray 2SS RS in stock?	DCJ	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	22	06-21-2009 02:51 PM
RJT in Southeast Alabama	RJT-Maro	USA - Southeast	2	06-07-2009 10:31 PM