NITROUS GUYS - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dekan513 · 11-25-2013, 07:52 AM

Lookin for nitrous cars. we need a thread . Currently im running cam and 150 shot thur a harris speed works plate. what are ur guys setups and how u installed it and such.

i cut out my spare tire hole right now and gonna go back with a flat plate with a recessed box for my bottle and battery. then thinking about a spray bar of some kind to hide the kit.

SolomonAKOO · 11-25-2013, 11:40 AM

why not get the "money maker" kit for Nitrous Outlet? they put the lines through your Intake so its all hidden.

dan0617 · 11-25-2013, 11:51 AM

I'm spraying a 125 shot with a Zex kit, into 12.5 PSI boost from an ECS Vortech Si trim setup.

I just have the nozzle installed in the intake tube just after the MAF sensor. I control timing with an LNC 2000, but since it is injecting into boost after the MAF, the IAT in the MAF doesn't adjust timing up for the intercooling effect, so I really don't need to retard timing much at all.

15 LB bottle in the trunk on the left side. I just ordered a remote bottle opener, if it won't fit for length I might have to drop down to a 10 LB bottle.

Joe@CPR.com · 11-25-2013, 12:16 PM

nitrous outlet makes a nice mount that puts the bottle on the back trunk wall, here is a pic of one of our recent installs

Brandon@NitrousOutlet · 11-25-2013, 12:38 PM

^ Top notch. Thats the install all installers should strive for

Joe@CPR.com · 11-25-2013, 12:41 PM

Quote:

Originally Posted by Brandon@NitrousOutlet

^ Top notch. Thats the install all installers should strive for

Thanks man! we sure do a lot of these haha

dekan513 · 11-25-2013, 03:05 PM

nice , ya ive got the lnc-2000 , and nos launcher controller on mine. the money maker is probably what im gonna go with or something from rick crawford.

Brandon@NitrousOutlet · 11-25-2013, 04:20 PM

Thats a clean setup!

dekan513 · 11-25-2013, 06:25 PM

be alot cleaner with a nitrous outlet setup. if i end up keepin the car . its gonna be a big shot on it next year . with forged bottom end. car should do good its about 3500-3600 lb range right now.

infernometallicSS · 11-25-2013, 07:53 PM

Quote:

Originally Posted by Joe@CPR.com

nitrous outlet makes a nice mount that puts the bottle on the back trunk wall, here is a pic of one of our recent installs

This car looks real familiar...

Joe@CPR.com · 11-25-2013, 08:05 PM

What do you know about that install jeff!

Camarojt · 11-26-2013, 12:05 AM

Quote:

Originally Posted by dekan513

nice , ya ive got the lnc-2000 , and nos launcher controller on mine. the money maker is probably what im gonna go with or something from rick crawford.

That looks good!!

dan0617 · 11-26-2013, 10:48 AM

I'm assuming there is a special pick-up tube in the bottle that allows it to be mounted sideways? Can't mount a normal bottle that way.

Joe@CPR.com · 11-26-2013, 11:04 AM

Quote:

Originally Posted by dan0617

I'm assuming there is a special pick-up tube in the bottle that allows it to be mounted sideways? Can't mount a normal bottle that way.

it has a siphon tube in it, nitrous outlet designed the mount so i'm sure it's perfectly fine.

11-25-2013, 07:52 AM	#1
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	NITROUS GUYS Lookin for nitrous cars. we need a thread . Currently im running cam and 150 shot thur a harris speed works plate. what are ur guys setups and how u installed it and such. i cut out my spare tire hole right now and gonna go back with a flat plate with a recessed box for my bottle and battery. then thinking about a spray bar of some kind to hide the kit. __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-25-2013, 11:40 AM	#2
SolomonAKOO Drives: 2011 2SS/RS Join Date: Apr 2012 Location: Wyoming Posts: 1,210 View My Garage	why not get the "money maker" kit for Nitrous Outlet? they put the lines through your Intake so its all hidden. __________________ 1 7/8" TSP headers straight piped, Custom Tick Performance cam w/ supporting mods, 1" BMR springs and other BMR suspension mods. Tuned with HPtuners by Matt@FSP

11-25-2013, 11:51 AM	#3
dan0617 Drives: 2011 Inferno Orange SS Convertible Join Date: Apr 2012 Location: Tyrone, PA Posts: 640 View My Garage	I'm spraying a 125 shot with a Zex kit, into 12.5 PSI boost from an ECS Vortech Si trim setup. I just have the nozzle installed in the intake tube just after the MAF sensor. I control timing with an LNC 2000, but since it is injecting into boost after the MAF, the IAT in the MAF doesn't adjust timing up for the intercooling effect, so I really don't need to retard timing much at all. 15 LB bottle in the trunk on the left side. I just ordered a remote bottle opener, if it won't fit for length I might have to drop down to a 10 LB bottle. __________________ 2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.

11-25-2013, 03:05 PM	#7
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	nice , ya ive got the lnc-2000 , and nos launcher controller on mine. the money maker is probably what im gonna go with or something from rick crawford. Attached Images __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-25-2013, 06:25 PM	#9
dekan513 chevy pride Drives: 2ss/rs Join Date: Feb 2012 Location: pikeville ky Posts: 2,141 View My Garage	be alot cleaner with a nitrous outlet setup. if i end up keepin the car . its gonna be a big shot on it next year . with forged bottom end. car should do good its about 3500-3600 lb range right now. __________________ check out ky speeds fb page https://www.facebook.com/kyspeed

11-25-2013, 12:16 PM	#4
Joe@CPR.com Account Suspended Drives: 03 vette, 94 trans am, 04 gto Join Date: Jul 2012 Location: Mesa, AZ Posts: 995	nitrous outlet makes a nice mount that puts the bottle on the back trunk wall, here is a pic of one of our recent installs

11-25-2013, 12:38 PM	#5
Brandon@NitrousOutlet Drives: Fast! Join Date: Mar 2013 Location: Waco TX Posts: 62	^ Top notch. Thats the install all installers should strive for

11-25-2013, 04:20 PM	#8
Brandon@NitrousOutlet Drives: Fast! Join Date: Mar 2013 Location: Waco TX Posts: 62	Thats a clean setup!

11-25-2013, 08:05 PM	#11
Joe@CPR.com Account Suspended Drives: 03 vette, 94 trans am, 04 gto Join Date: Jul 2012 Location: Mesa, AZ Posts: 995	What do you know about that install jeff!

11-26-2013, 10:48 AM	#13
dan0617 Drives: 2011 Inferno Orange SS Convertible Join Date: Apr 2012 Location: Tyrone, PA Posts: 640 View My Garage	I'm assuming there is a special pick-up tube in the bottle that allows it to be mounted sideways? Can't mount a normal bottle that way. __________________ 2011 SS IOM Vert. ECS Vortech 13+ psi, Water/Meth, ID850’s, ZL1 pump with MSD Voltage Booster, 2800 stall, LT headers, Drag radials, Drag alignment, Cradle Bushings. A million other supporting mods. Tuned by Ted.