2step rpm controller - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ABMLS3 · 03-18-2015, 08:08 PM

Looking into getting a 2step launch control system, but was wonder if there are negative side effects to it? Will it hurt my engine at all? Good with turbos?
Also what company would you recommend

LS7 427 · 03-18-2015, 10:37 PM

You should find what you need here. Excellent quality and support.

http://www.lingenfelter.com/mm5/merc...gory_Code=C163

Bryan

blake2010ss · 03-19-2015, 10:33 AM

Im tryin to figure out what I should get too. I have the MSD 8733, but trying to determine if i should just do a mircroswitch or the ctap-001

Unreal · 03-19-2015, 10:36 AM

LPE controllers work great. No real downside as long as you set them up correctly.

blake2010ss · 03-19-2015, 10:38 AM

Unreal, are you using the LNC-2000?

yotaman96 · 03-19-2015, 09:36 PM

Quote:

Originally Posted by blake2010ss

Im tryin to figure out what I should get too. I have the MSD 8733, but trying to determine if i should just do a mircroswitch or the ctap-001

I just ordered the Ctap today along with the harness. I'll be using the MSD with it. I put everything in my cart last night and signed in to my account, but didn't check out. This morning, they sent an email with a 5% off code. It's not much, but every little bit helps.

blake2010ss · 03-20-2015, 03:11 PM

i ordered my ctap yesterday. i had the msd already at the house but found out later i needed to microswitch or do the ctap.

Unreal · 03-20-2015, 04:56 PM

Don't have a LNC2000 on my car now, but I have, and installed/tuned a few for n2o setups.

03-18-2015, 08:08 PM	#1
ABMLS3 Drives: 2010 Aqua Blue Camaro 2SS/RS Join Date: May 2013 Location: Long Island NY Posts: 657	2step rpm controller Looking into getting a 2step launch control system, but was wonder if there are negative side effects to it? Will it hurt my engine at all? Good with turbos? Also what company would you recommend __________________ Power Source Performance Turbo Kit 416 C.I ,TH400 Instagram: TomTraube COTW ABMLS3 Build Thread

03-18-2015, 10:37 PM	#2
LS7 427 10.11 @ 136.32 Drives: Black & Yellow 2SS/RS LPE LS7 427 Join Date: Mar 2010 Location: Redcliff, Alberta Posts: 957 View My Garage	You should find what you need here. Excellent quality and support. http://www.lingenfelter.com/mm5/merc...gory_Code=C163 Bryan __________________ My Build Journal Built, Tuned and Maintained By........

03-19-2015, 10:33 AM	#3
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	Im tryin to figure out what I should get too. I have the MSD 8733, but trying to determine if i should just do a mircroswitch or the ctap-001 __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

03-19-2015, 10:36 AM	#4
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	LPE controllers work great. No real downside as long as you set them up correctly. __________________ Nick Corvette Z06 -1200ish rwhp

03-19-2015, 10:38 AM	#5
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	Unreal, are you using the LNC-2000? __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

03-20-2015, 03:11 PM	#7
blake2010ss Drives: 2010 Camaro 2ss/rs Join Date: Oct 2009 Location: stone mountain, GA Posts: 2,228	i ordered my ctap yesterday. i had the msd already at the house but found out later i needed to microswitch or do the ctap. __________________ 2010 Camaro 2SS/RS LS3 1093/1066 416, AGP 6262, E85, Cam

03-20-2015, 04:56 PM	#8
Unreal Drives: 2006 Z06 Join Date: Oct 2010 Location: Gilbert, AZ Posts: 5,712	Don't have a LNC2000 on my car now, but I have, and installed/tuned a few for n2o setups. __________________ Nick Corvette Z06 -1200ish rwhp