335/30/20's.

[1JEWLDSSRS]

OK any of you folks running these on your 5th gens, I am looking at going with this size tire on the rear of my beast. Currently I have 315/35/20's on Ferrada FR3 deep concave's and they are 20x11.5 with +30 offset, so they stick outside of the fender just a tad with plenty of room on the inside, so clearance is not an issue. If you would who ever is running them please post some pics if you have the 335'S out back, would appreciate it. Thanks

[1JEWLDSSRS]

bump,, 46 views and no body ?? I googled for pics but the pics that come up do not show much on our 5th gens, that'w why I am asking you folks..Thanks

[SSkat]

Saw this thread a little down the page. Only ones ive seen

https://www.camaro5.com/forums/showthread.php?t=545417

[sixty9fordkiller]

whats up jeweled. im running 335/30/20s

[sixty9fordkiller]

referring to SSkat's link, post #30 are my pics

https://www.camaro5.com/forums/showt...=545417&page=3

video cruising
https://1drv.ms/v/s!Asr97lBX1xXHgtM06Jx4bfYjiwf7Rw

[1JEWLDSSRS]

Originally Posted by SSkat

Saw this thread a little down the page. Only ones ive seen

https://www.camaro5.com/forums/showthread.php?t=545417

Yea, I saw this one before and even posted in it. Seems like a lot of folks are skeptical about running them and some say you can't. Never showed any good pics of them except for 69fordkiller..

[1JEWLDSSRS]

Originally Posted by sixty9fordkiller

whats up jeweled. im running 335/30/20s

Hey yea, just was looking foe some good pics of these on the car, side, rear, quarter to show the width of them and the sidewall profile. I have 11.5 inch wide rims with a +30 offset with the 315's on them and I don't like how the sidewall bends in to the tread width, makes them look round and I am looking for fat and square look.. The rims with the offset set outside the fender just a tad, about 1/4 inch..

[sixty9fordkiller]

Guinness2 was my inspration. He's the first that i know of that ran 335s

[Chris49066SS]

Originally Posted by 1JEWLDSSRS

Yea, I saw this one before and even posted in it. Seems like a lot of folks are skeptical about running them and some say you can't. Never showed any good pics of them except for 69fordkiller..

Looks like they've worked for him for quite a while

[1JEWLDSSRS]

Originally Posted by sixty9fordkiller

referring to SSkat's link, post #30 are my pics

https://www.camaro5.com/forums/showt...=545417&page=3

video cruising
https://1drv.ms/v/s!Asr97lBX1xXHgtM06Jx4bfYjiwf7Rw

Nice pics! And I am lowered 1.25 all the way around, but don't rub at all.

[sixty9fordkiller]

Originally Posted by 1JEWLDSSRS

Hey yea, just was looking foe some good pics of these on the car, side, rear, quarter to show the width of them and the sidewall profile. I have 11.5 inch wide rims with a +30 offset with the 315's on them and I don't like how the sidewall bends in to the tread width, makes them look round and I am looking for fat and square look.. The rims with the offset set outside the fender just a tad, about 1/4 inch..

ill get some more pics tomorrow. I did the DSE solid bushings wednesday and the car back yesterday afternoon and im gonna get under the car and take pics of all the new goodies and ill take pictures of inner clearances

im running factory 11" GM ZL1/1LE wheels so i really cant tell you about what its gonna be like with your wheels, but i can tell you that they fit without issue using the factory stuff

[sixty9fordkiller]

even my drag set up will be 335s

[sixty9fordkiller]

here's a walkaround 1 month after i got them


https://1drv.ms/v/s!Asr97lBX1xXHqSlJaS8gqHRYkAUS

[1JEWLDSSRS]

Nice sixtynine !!! Yea I have PLENTY of room on the inside, that's not an issue. Guess I'm gonna go order them this afternoon.. I am also running 275/40/20's on the front on a 10.5 inch rim with +28 offset. I think the fronts should be ok with the diameters off just a tad from front to back..Thanks sixty9fordkiller, you twisted my arm!! lol..