You are browsing camaro5 
 |
|
04-18-2023, 10:01 AM
|
#1 |
 Drives: 65 mustang Join Date: Jan 2013
Location: sacramento, ca
Posts: 59
|
Wtb stock cam, lifters, pushrods, oil pump, timing set etc.
Looking for STOCK, takeoff condition parts. Need cam, lifters, pushrods, rockers, oil pump, timing set, front and rear covers, hardware etc. Basically everything that gets tossed out when doing a cam swap. Can be ls3, l92, l99, l96 whatever. Thanks in advance
|
|
|
|
04-18-2023, 03:24 PM
|
#2 |
          
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
I have a set of Valve covers and coil brackets.
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
|
|
|
|
04-18-2023, 06:50 PM
|
#3 |
 Drives: 2014 Camaro 2SS Join Date: Jun 2021
Location: Chicago
Posts: 5
|
Have cam, cam gear, push rods, springs and stock crank pulley. Out of a 2014 ls3, pulled at 55k.
|
|
|
|
|
05-10-2023, 07:34 PM
|
#4 |
|
synergy2011
Drives: 2011 synergy green 1ss/rs Join Date: Mar 2009
Location: wheatfield NY
Posts: 2,278
 |
I have rockers
__________________
2011 synergy green ss/rs,rally stripes
|
|
|
|
|
05-11-2023, 08:32 AM
|
#5 |
|
2&THEHIT
Drives: 5th Gen Camaro; 5th Gen Ram 3500 Join Date: Mar 2018
Location: Garner, NC
Posts: 1,013
|
I think I have everything except the rockers (L99)
|
|
|
|
|
05-11-2023, 10:37 AM
|
#6 |
|
synergy2011
Drives: 2011 synergy green 1ss/rs Join Date: Mar 2009
Location: wheatfield NY
Posts: 2,278
|
Mine are from my ls3 not sure of the rockers are different for l99-then ls3
__________________
2011 synergy green ss/rs,rally stripes
|
|
|
|
|
|
|
|
 |
|
|
